Home > Resistor Networks, Arrays >

Laser trimmed chip resistor array Walsin WA06X393JTL with high grade ceramic body and surface mount design

Product Categories

Fixed Inductors [2693]
RF Filters [248]
Oscillators [540]
Crystals [2945]
Rotary Potentiometers, Rheostats [234]
Programmable Oscillators [242]
Ceramic Filters [216]
Delay Lines [5]
Aluminum Electrolytic Capacitors [2799]
Trimmer Potentiometers [1587]
Aluminum - Polymer Capacitors [1039]
Thumbwheel Potentiometers [25]
Common Mode Chokes [1562]
Chassis Mount Resistors [135]
Chip Resistor - Surface Mount [1995]
Capacitor Kits [6]
Resistor Kits [17]
Cable Ferrites [83]
EMI/RFI Filters (LC, RC Networks) [152]
Ferrite Beads and Chips [1587]
Arrays, Signal Transformers [34]
Value Display Potentiometers [4]
Resistor Networks, Arrays [593]
Through Hole Resistors [711]
Wireless Charging Coils [34]
Film Capacitors [835]
Thin Film Capacitors [914]
Ceramic Capacitors [2764]
Tantalum Capacitors [134]
Current Sense Resistors [124]
Power Line Filter Modules [49]
Resonators [79]
Capacitor Networks, Arrays [24]
Electric Double Layer Capacitors (EDLC), Supercapacitors [3]
Pin Configurable/Selectable Oscillators [13]
Silicon Capacitors [2]
Adjustable Power Resistor [64]
Specialized Resistors [144]
VCOs (Voltage Controlled Oscillators) [81]
Trimmers, Variable Capacitors [9]
Ferrite Cores [96]
Feed Through Capacitors [134]
Slide Potentiometers [123]
Motor Start, Motor Run Capacitors (AC) [29]
SAW Filters [201]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Laser trimmed chip resistor array Walsin WA06X393JTL with high grade ceramic body and surface mount design

Number of Resistors : 4

Number of Pins : 8

Tolerance : ±5%

Resistance : 39kΩ

Power(Watts) : 100mW

Temperature Coefficient : ±200ppm/℃

Description : 4 ±5% 39kΩ 100mW ±200ppm/℃ 0603x4 Resistor Networks, Arrays RoHS

Mfr. Part # : WA06X393JTL

Model Number : WA06X393JTL

Package : 0603x4

Contact Now

Product Overview

The ASC_WA04/06 series offers general-purpose chip resistor arrays designed for surface mounting. These compact and lightweight components reduce final equipment size and lower assembly costs while enhancing reliability. They are RoHS compliant and lead-free. Applications include consumer electronics, EDP, and telecommunications equipment. The resistors are constructed on a high-grade ceramic body with internal metal electrodes and a laser-trimmed resistive paste, protected by a coating and tin-plated end terminations for ease of soldering.

Product Attributes

Brand: ASC
Certifications: RoHS compliant
Material: High grade ceramic body (aluminum oxide)
Termination: Tin (lead free) alloy

Technical Specifications

Series No.	Size	Resistance Tolerance	Resistance Range	Max. Dissipation (Tamb=70C)	Max. Operation Voltage (DC/RMS)	Max. Overload Voltage	Climatic Category
WA04Y (Convex)	0402x2 (1005x2)	5%, 1%	3 ~ 1M, Jumper 10 ~ 1M	1/16 W	25V	50V	55/155/56
WA04X (Convex)	0402x4 (1005x4)	5%, 1%	3 ~ 1M Jumper 10 ~ 1M	1/16 W	50V	100V	55/155/56
WA06X (Convex)	0603x4 (1608x4)	5%, 1%	1 ~ 10M Jumper, 10 ~ 100K	1/10 W	50V	100V	55/155/56
WA06W (Convex)	0602x8 (1605x8)	5%, 1%	10 ~ 1M, Jumper, 10 ~ 1M	1/16 W	50V	100V	55/155/56
WA06T (Concave)	0603x4 (1608x4)	5%, 1%	10 ~ 1M, Jumper	1/10 W	50V	100V	55/155/56

Dimensions (unit : mm)

Series	L	W	T	P	A	Ta	Tb	B	C	G	D	H1	H2
WA04Y	1.00 0.10	1.00 0.10	0.35 0.10	0.65 0.10	0.34 0.10	0.20 0.15	0.25 0.17	-	-	-	-	-	-
WA04X	2.00 0.10	1.00 0.10	0.45 0.10	0.50 0.05	0.40 0.10	-	-	0.20 0.10	0.30 0.05	0.25 0.10	-	-	-
WA06X	3.20 0.10	1.60 0.10	0.50 0.10	0.80 0.10	0.60 0.10	-	-	0.30 0.10	0.40 0.10	0.30 0.20	-	-	-
WA06W	4.00 0.20	1.60 0.15	0.45 0.10	0.50 0.20	-	-	-	0.30 0.20	-	0.30 0.20	0.20 0.10	0.40 0.20	0.30 0.10
WA06T	3.20+0.20/-0.10	1.60+0.20/-0.10	0.60 0.10	0.80 0.10	0.60 0.15	-	-	0.35 0.15	0.50 0.15	0.50 0.15	-	-	-

Marking

3-digits marking for E24 series 1% ,5% products. Each resistor is marked with a three digits code on the protective coating to designate the nominal resistance value. For values up to 9.1 the R is used as a decimal point. For values of 10.0 or greater the first 2 digits apply to the resistance value and the third indicates the number of zeros to follow. Example: RESISTANCE 4.7 -> 4R7, 10 -> 100, 100 -> 101, 6800 -> 682, 47000 -> 473. No marking for WA04Y chip resistors array and E96 series resistance.

Test and Requirements

Test	Procedure	Requirement
DC resistance (Resistor & Jumper)	Clause 4.5. Measured at specified test voltages.	Within specified tolerance. For Jumper: < 50m.
Temperature Coefficient of Resistance (T.C.R)	Clause 4.8. Natural resistance change per degree centigrade.	Refer to QUICK REFERENCE DATA.
Short time overload (S.T.O.L)	Clause 4.13. 5-second application of 2.5x RCWV or max overload voltage.	R/R max. (2%+0.10). < 50m.
Resistance to soldering heat(R.S.H)	Clause 4.18. Un-mounted chips immersed in SAC solder bath at 2605 for 101 seconds.	R/R max. (1%+0.05). No visible damage. < 50m.
Solderability	Clause 4.17. Un-mounted chips immersed in SAC solder bath at 2355 for 20.5 seconds.	Good tinning (>95% covered). No visible damage.
Temperature cycling	Clause 4.19. 5 continuous cycles: -55C (30 min), 20C (2-3 min), +155C (30 min), 20C (2-3 min).	R/R max. (1%+0.05). No visible damage. < 50m.
Load life (endurance)	Clause 4.25. 1000 hours at 702C, loaded with RCWV or Vmax.	R/R max. (3%+0.10) for 10R<1M; R/R max. (5%+0.10) for R<10, R1M. < 50m.
Load life in Humidity	Clause 4.24. 1000 hours at 40C2C and 90~95% RH, loaded with RCWV or Vmax.	R/R max. (3%+0.10) for 10R<1M; R/R max. (5%+0.10) for R<10, R1M. < 50m.
Adhesion	Clause 4.32. Pressurizing force: 5N, Test time: 101sec.	No remarkable damage or removal of the terminations.
Insulation Resistance	Clause 4.6. Apply max overload voltage (DC) for 1 minute.	R10G.
Dielectric Withstand Voltage	Clause 4.7. Apply max overload voltage (AC) for 1 minute.	No breakdown or flashover.

Test Condition for Jumper (0 )

Item	WA04Y	WA04X	WA06X	WA06W	WA06T
Power Rating At 70C	1/16W	1/16W	1/10W	1/16W	1/10W
Resistance	MAX.50m	MAX.50m	MAX.50m	MAX.50m	MAX.50m
Rated Current	1A	1A	1A	2A	1A
Peak Current	1.5A	1.5A	3A	3A	3A
Operating Temperature	-55~155C	-55~155C	-55~155C	-55~155C	-55~155C

Catalogue Numbers

The resistors have a catalogue number starting with . WA X XXXX X X L

Size code: 06: 0603 (1608), 04: 0402(1005)

Type code: X : x 4, Convex; Y : x 2, Convex; W :x 8, Convex; T : x 4, Concave

Resistance code: 5% E24: 2 significant digits followed by no. of zeros and a blank (e.g., 4.7 =4R7_, 10 =100_, 220 =221_, Jumper =000_). 1%, E24+E96: 3 significant digits followed by no. of zeros (e.g., 100 =1000, 37.4K =3742).

Tolerance: F: 1%, J : 5%, P : Jumper

Packaging code: T : 7 Reel taping, B : Bulk

Termination code: L = Sn base (lead free)

Packaging

WA06X, WA06T: 1. Reeled tape packaging: 8mm width paper taping, 5000pcs per reel. 2. Bulk packaging: 5000pcs per polybag.

WA06W: 1. Reeled tape packaging: 12mm width paper taping, 5000pcs per reel. 2. Bulk packaging: 5000pcs per polybag.

WA04X, WA04Y: 1. Reeled tape packaging: 8mm width paper taping, 10,000pcs per reel.

Paper Tape Specifications (unit :mm)

Symbol	A	B	W	F	E
WA06X,WA06T	3.600.20	2.000.20	-	-	-
WA04X	2.200.20	1.200.20	3.500.20	-	-
WA04Y	1.150.10	1.150.10	8.000.30	3.500.05	1.750.10
WA06W	-	-	12.000.10	5.500.05	1.750.10

Symbol	P1	P0	D	T
WA06X,WA06T	4.000.10	Max. 1.0	-	-
WA04X	-	Max. 0.6	-	-
WA04Y	-	-	-	-
WA06W	-	-	-	-

2410121521_Walsin-WA06X393JTL_C396855.pdf

Quality Laser trimmed chip resistor array Walsin WA06X393JTL with high grade ceramic body and surface mount design for sale

Laser trimmed chip resistor array Walsin WA06X393JTL with high grade ceramic body and surface mount design Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!