| Sign In | Join Free | My infospaceinc.com |
|
Normal temperature Frequency Tolerance : ±20ppm
Frequency Stability : ±20ppm
Operating Temperature : -20℃~+70℃
Load Capacitance : 20pF
Frequency : 26.2982MHz
Description : Crystal 26.2982MHz ±20ppm 20pF HC-49S-SMD
Mfr. Part # : KBD2629A2020
Model Number : KBD2629A2020
Package : HC-49S-SMD
The HC-49USSMD is a Quartz Crystal Resonator manufactured by Shenzhen Kaiyuexiang Electronics Co., Ltd. It is designed for applications requiring precise frequency control.
| Parameter | Value |
|---|---|
| Holder Type | HC-49USSMD |
| Mode of Vibration | AT CUT |
| Oscillation Mode | FUND S&A |
| Test Facilities | KH-1240 |
| Storage Temperature | -40 TO +85 |
| Driver Level | 100W |
| Normal Frequency | 26.2982 MHz |
| Frequency Tolerance (252) | 20ppm |
| Temperature Stability | 20ppm |
| Operating Temperature Range | -20 TO +70 |
| Load Capacitance | 20 PF |
| Motional Capacitance | 3PF MAX |
| Shunt Capacitance | (Not Specified) |
| Effective Series Resistance | 40 MAX |
| Insulation Resistance | 500M OHMS MIN AT DC 100V |
| Solderability | 95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. |
| Shock Test | Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board. |
| Vibration Test | Frequency: 1055Hz, Period: 12min, Amplitude: 1.5mm PP, Direction: X.Y.Z, Time: 2 hours/each direction. |
| Strength of Terminals/Lead-Wires - Pulling Test | 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages. |
| Strength of Terminals/Lead-Wires - Bending Test | 90-degree bending with 225gs tension weight. No visual damages. |
| Sealing Tightness | No observation of gas bubble after specimen put in hot water at +90+95 for 5 min. |
| Soldering Dip Test | Terminals/lead-wires dipped into solder melted tank at +2305 for 3sec. Dipping depth: 2mm from the bottom of specimens body. Soldering portion: over 90% coverage. |
| Solder Heating Test | Terminals/lead-wires dipped into solder melted tank at +35010 for 3-4 sec. Electrical characteristics shall be satisfied. |
| Humidity Test | Electrical characteristics shall be satisfied after 250 hours at 602 in 9095% humidity. |
| Storage in Low Temperature Test | Electrical characteristics shall be satisfied after 250 hours at -302. |
| Storage in High Temperature Test | Electrical characteristics shall be satisfied after 250 hours at +852. |
| Temperature Cycle Test | Electrical characteristics shall be satisfied after 3 cycles. Temperature shift rate: 1/min. |
|
|
Electronic Component Quartz Crystal Resonator KYX KBD2629A2020 HC49USSMD Model with 26.2982 MHz Frequency Images |