Home > Thin Film Capacitors >

polypropylene film capacitor Jimson MPC155K450D01 suitable for bypassing and signal coupling circuits

Product Categories

Fixed Inductors [2693]
RF Filters [248]
Oscillators [540]
Crystals [2945]
Rotary Potentiometers, Rheostats [234]
Programmable Oscillators [242]
Ceramic Filters [216]
Delay Lines [5]
Aluminum Electrolytic Capacitors [2799]
Trimmer Potentiometers [1587]
Aluminum - Polymer Capacitors [1039]
Thumbwheel Potentiometers [25]
Common Mode Chokes [1562]
Chassis Mount Resistors [135]
Chip Resistor - Surface Mount [1995]
Capacitor Kits [6]
Resistor Kits [17]
Cable Ferrites [83]
EMI/RFI Filters (LC, RC Networks) [152]
Ferrite Beads and Chips [1587]
Arrays, Signal Transformers [34]
Value Display Potentiometers [4]
Resistor Networks, Arrays [593]
Through Hole Resistors [711]
Wireless Charging Coils [34]
Film Capacitors [835]
Thin Film Capacitors [914]
Ceramic Capacitors [2764]
Tantalum Capacitors [134]
Current Sense Resistors [124]
Power Line Filter Modules [49]
Resonators [79]
Capacitor Networks, Arrays [24]
Electric Double Layer Capacitors (EDLC), Supercapacitors [3]
Pin Configurable/Selectable Oscillators [13]
Silicon Capacitors [2]
Adjustable Power Resistor [64]
Specialized Resistors [144]
VCOs (Voltage Controlled Oscillators) [81]
Trimmers, Variable Capacitors [9]
Ferrite Cores [96]
Feed Through Capacitors [134]
Slide Potentiometers [123]
Motor Start, Motor Run Capacitors (AC) [29]
SAW Filters [201]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

polypropylene film capacitor Jimson MPC155K450D01 suitable for bypassing and signal coupling circuits

Tolerance : ±10%

Capacitance : 1.5uF

Dielectric Material : Polypropylene Film

Description : ±10% 1.5uF Polypropylene Film Through Hole,P=22.5mm Thin Film Capacitors RoHS

Mfr. Part # : MPC155K450D01

Model Number : MPC155K450D01

Package : Through Hole,P=22.5mm

Contact Now

Product Overview

The JIMSON ELECTRONICS (XIAMEN) CO.,LTD. MPC series capacitors are non-inductive, self-healing capacitors designed for a wide range of electronic applications. They offer high moisture resistance and excellent physical and environmental characteristics. These capacitors are suitable for filtering, noise suppression, pulse, logic, and timing circuits, as well as DC-blocking, by-passing, and signal coupling in communication equipment. They are also widely used in power electronics for absorbing peak voltage and current during switching device turn-off.

Product Attributes

Brand: JIMSON (JS)
Origin: Xiamen, China
Dielectric: Polypropylene film
Electrodes: Vacuum evaporated metal
Coating: Encapsulated in reinforced flame retardant plastic case sealed with epoxy resin (UL94V-0)
Leads: Radial leads of tinned wire/insulation flexible wire
Terminal Contact: Electrically welded (Arc spot welding)
Marking: UV ink or laser engraving
Reference Standards: IEC 60384-16, GB10190

Technical Specifications

Specification	Description	Value	Test Conditions
Capacitance	Rated Capacitance	0.01-60uF	Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max.
Capacitance	Capacitance Tolerance	J=5% / K=10%
Voltage	Rated Voltage	250-2000VDC
Voltage	Voltage Proof	1.6*UR (1 minute at 20)	No permanent breakdown or flashover
Dissipation Factor (tan)		DF0.1% (C<10uF)	at 20, 1KHz, Measuring voltage: 1Vrms.max.
Dissipation Factor (tan)		DF0.2% (C10uF)
Insulation Resistance	C0.33uF	IR30000M	measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65%
Insulation Resistance	C0.33uF	IR*C5000S
Endurance		C/C5%; DF0.40%; IR50% of the specified value	1000 hours with 125% of rated voltage at 85.
Climatic Catalogue		40/85/21
Solderability	Lead Circumference Coverage	75%	Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body
Solderability	Heat Shock	Appearance without visible damage	Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body
Lead Tensile Strength	Appearance without damage	Pull: 2.2 LBS, Time: 5 sec
Lead Bending Strength	Appearance without damage	Load: 1.1 LBS	The body of capacitor is bent 90 degrees and returned to its original position
Vibration	Appearance without visible damage	Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours)

Dimensional Data

SYMBOL	CAP (uF)	COLOR	*WHT (mm 0.5)*	L (mm 5)	P (mm 1.0)	D (mm 0.05)	Remarks
MPC103J2000D02	0.01	YELLOW	18126	25	15	CP0.6
MPC104J630D04	0.1	YELLOW	181810	25	15	CP0.8	Double film
MPC104K520D01	0.1	YELLOW	13126	25	10	CP0.6
MPC105J1000D01	1.0	YELLOW	322011	3.8	27.5	CP0.8
MPC105K1000D02	1.0	YELLOW	41.531.424	25	37.5	CP1.0
MPC105K450D01	1.0	YELLOW	181810	23	15	CP0.8
MPC106J650D01	10.0	YELLOW	41.52419	21	37.5	CP0.8	Four feet B=12.7
MPC155K100D01	1.5	YELLOW	15177	20	12.5	CU0.8
MPC155K450D01	1.5	YELLOW	E8	25	22.5	CP0.8
MPC156K1200D01	15.0	YELLOW	42.53825	21	37.5	CU0.8
MPC156K900D01	15.0	BLACK	423623	25	37.5	CU0.8	Black case yellow glue
MPC224J630A01	0.22	YELLOW	181610	25	15	CP0.6
MPC226K1200D01	22.0	YELLOW	584028	21	52.5	CU1.0	Boxed
MPC332J1000D02	0.0033	YELLOW	1394	25	10	CP0.6
MPC332J2000D01	0.0033	YELLOW	18126	25	CP0.6	L25	Gray yellow glue
MPC333K1000A01	0.033	YELLOW	18126	25	15	CP0.8	Double film
MPC335K250D01	3.3	YELLOW	312514	25	27.5	CP0.8
MPC335K450D01	3.3	YELLOW	322011	25	27.5	CP0.8
MPC473J630D05	0.047	YELLOW	18126	3.8	15	CP0.6
MPC504J1000D01	0.05	BLACK	383020	21	30.5	CP0.8	Black case yellow glue
MPC504J1000D02	0.05	YELLOW	323318	3.5	27.5	CU1.0	Irregular box
MPC565M250D01	5.6	YELLOW	312514	30	27.5	CP0.8
MPC605K1200D01	6.0	YELLOW	41.531.424	25	37.5	CP1.0
MPC606K500D01	60.0	YELLOW	42.55035	21	37.5	CP0.8	Four feet B=20.3
MPC805K1000D01	8.0	YELLOW	323722	23	27.5	CP0.8

Soldering Suggestion

Maximum Soldering Temperature: 270 for 4S. Pre-heating: 105 for 1min.

Storage Environment and Conditions

Storage Environment: Temperature 30, Humidity 70%. Unopened MBB (Moisture Barrier Bag) ensures 24 months of storage.

Storage Condition: Store in an environment free from hydrogen chloride, hydrogen sulfide, and sulfuric acid. Avoid high temperature and high humidity.

2410121441_Jimson-MPC155K450D01_C7431942.pdf

Quality polypropylene film capacitor Jimson MPC155K450D01 suitable for bypassing and signal coupling circuits for sale

polypropylene film capacitor Jimson MPC155K450D01 suitable for bypassing and signal coupling circuits Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!