| Capacitance | Rated Capacitance | 0.1uF | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. |
| Capacitance Tolerance | K=10% | |
| Capacitance Unit | 1F=1,000mF=1,000,000uF=1,000,000,000nF=1,000,000,000,000pF | |
| Voltage | Rated Voltage | 100VDC | |
| Voltage Proof | 1.6*UR Unit:VDC (1 minute at 20) | No permanent breakdown or arcing |
| Dissipation Factor (DF) | DF1.0% | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. | |
| Insulation Resistance (IR) | C0.33uF | IR5000M | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| C0.33uF | IR*C3000S |
| Endurance | C/C5%; DF0.20% | 1000 hours with 125% of rated voltage at 85. After the test | |
| IR (C0.1uF) | 9000 M | |
| Climatic Catalogue | 40/85/21 | | |
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body | |
| Heat Shock | C/C5% DF1.2* | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body |
| Lead Tensile Strength | Pull: 2.2 LBS, Time: 5 sec | No visible damage to the lead | |
| Lead Bending Strength | Load of lead: 1.1 LBS | No damage to the lead (The body of capacitor is bent 90 degrees and returned to its original position) | |
| Vibration | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) | No visible damage to the body | |
| Reference Standard | IEC60384-2, GB7322 | | |
| Construction - Dielectric | Polyester film | | |
| Construction - Electrodes | Vacuum evaporated metal | | |
| Construction - Coating | Encapsulated in reinforced flame retardant plastic case sealed with epoxy resin (UL94V-0) | | |
| Construction - Leads | Radial leads of tinned wire | | |
| Construction - Terminal contact | Electrically welded | | |
| Features | Small size, Low loss and good stability, Long life due to excellent self-healing | | |
| Application | Coupling, filter, noise-supperssion, by-passing of DC and pulse circuits in all kinds of machines | | |
| Marking - Individual Capacitor | Rated capacitance, Rated voltage, Capacitance tolerance, Manufacturer's symbol (JIMSON/JS) | | |
| Marking - Package | Product type, rating, quantity, date of manufacture, location of manufacture, manufacturer's name | | |
| Soldering Suggestion - Pre-heating | 105 | 1min | |
| Soldering Suggestion - Soldering | 270 | 4S | |
| Storage Environment | Temperature 30, Humidity 70% (MBB not opened) | 24 months storage period | |
| Storage Condition | Avoid atmospheric contaminants (HCl, H2S, H2SO4 etc.), high temperature and high humidity. | | |
