Home > Thin Film Capacitors >

Capacitor Jimson PEI102J100D01 featuring low dissipation factor and mechanical strength epoxy coating

Product Categories

Crystals [3000]
Delay Lines [5]
Aluminum - Polymer Capacitors [1170]
Aluminum Electrolytic Capacitors [3000]
Oscillators [539]
Thumbwheel Potentiometers [25]
Chassis Mount Resistors [135]
Chip Resistor - Surface Mount [2074]
Capacitor Kits [6]
Resistor Kits [17]
Cable Ferrites [84]
Common Mode Chokes [1585]
Arrays, Signal Transformers [34]
Value Display Potentiometers [4]
Ferrite Beads and Chips [1587]
Wireless Charging Coils [34]
Current Sense Resistors [126]
Power Line Filter Modules [49]
Capacitor Networks, Arrays [24]
Electric Double Layer Capacitors (EDLC), Supercapacitors [3]
EMI/RFI Filters (LC, RC Networks) [154]
Ceramic Capacitors [3000]
Film Capacitors [843]
Resistor Networks, Arrays [637]
Pin Configurable/Selectable Oscillators [13]
Stand Alone Programmers [1]
Fixed Inductors [3000]
Silicon Capacitors [2]
Ceramic Filters [216]
Adjustable Power Resistor [64]
Rotary Potentiometers, Rheostats [235]
Trimmer Potentiometers [1622]
Specialized Resistors [144]
VCOs (Voltage Controlled Oscillators) [81]
Through Hole Resistors [711]
Resonators [79]
Ferrite Cores [96]
Feed Through Capacitors [134]
Slide Potentiometers [123]
Tantalum - Polymer Capacitors [175]
Tantalum Capacitors [143]
RF Filters [231]
Motor Start, Motor Run Capacitors (AC) [29]
Thin Film Capacitors [999]
Programmable Oscillators [242]
Trimmers, Variable Capacitors [10]
SAW Filters [201]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Capacitor Jimson PEI102J100D01 featuring low dissipation factor and mechanical strength epoxy coating

Tolerance : ±5%

Voltage Rating : 100V

Capacitance : 1nF

Operating Temperature : -40℃~+85℃

Dielectric Material : Polyester

Description : 1nF ±5% 100V Film Capacitor Polyester Through Hole P=3mm

Mfr. Part # : PEI102J100D01

Model Number : PEI102J100D01

Package : Through Hole,P=3mm

Contact Now

Product Overview

The JIMSON ELECTRONICS (XIAMEN) CO.,LTD. PEI capacitor offers a capacitance range from 1nF to 10nF with a rated voltage of 100VDC. These capacitors are characterized by their small size, light weight, and low cost, making them ideal for various electronic applications. The design features direct lead welding to electrodes for reduced dissipation factor and epoxy resin vacuum-dipping for enhanced mechanical strength and humidity resistance. They are widely used in DC and pulsing circuits of radios, TV sets, and other electronic equipment, as well as in high-voltage applications like energy-saving lamps and mosquito-killer lamps.

Product Attributes

Brand: JIMSON ELECTRONICS (XIAMEN) CO.,LTD.
Customer:
Product Name: Capacitor
Type: PEI
Origin: Xiamen, China
Material (Dielectric): Polyester film
Material (Electrodes): Vacuum evaporated metal
Material (Coating): Epoxy resin (fire retardant on request)
Leads: Radial leads of tinned wire
Terminal Contact: Electrically welded
Color (Example): Green (for specific models)
Reference Standard: IEC384-11, SJ/T 10786-1996

Technical Specifications

Rated Capacitance	Capacitance Tolerance	Rated Voltage	Dissipation Factor (max)	Insulation Resistance (min)	Endurance Test (2000h @ 85C, 140% UR)	Solderability (2355C, 2.00.5s)	Heat Shock (2605C, 5.00.5s)	Lead Tensile Strength	Lead Bending Strength	Vibration (10Hz-55Hz, 1.5mm amplitude)	Climatic Catalogue
0.001uF (102)	J (5%)	100VDC	1.0% (1kHz, 1Vrms)	30000M (Rated voltage or <100VDC, 1min @ 20C, RH65%)	C/C5%; DF1%; IR50% of specified value	Solder covers 75% of lead circumference	C/C5%, DF1.2*specified value; No visible damage	Pull: 2.2 LBS, 5 sec; No visible damage	Load: 1.1 LBS; Body bent 90 and returned; No visible damage	No visible damage (2h per direction, 3 directions)	40/85/21
0.0022uF (222)	J (5%)	100VDC	1.0% (1kHz, 1Vrms)	30000M (Rated voltage or <100VDC, 1min @ 20C, RH65%)	C/C5%; DF1%; IR50% of specified value	Solder covers 75% of lead circumference	C/C5%, DF1.2*specified value; No visible damage	Pull: 2.2 LBS, 5 sec; No visible damage	Load: 1.1 LBS; Body bent 90 and returned; No visible damage	No visible damage (2h per direction, 3 directions)	40/85/21
0.0047uF (472)	J (5%)	100VDC	1.0% (1kHz, 1Vrms)	30000M (Rated voltage or <100VDC, 1min @ 20C, RH65%)	C/C5%; DF1%; IR50% of specified value	Solder covers 75% of lead circumference	C/C5%, DF1.2*specified value; No visible damage	Pull: 2.2 LBS, 5 sec; No visible damage	Load: 1.1 LBS; Body bent 90 and returned; No visible damage	No visible damage (2h per direction, 3 directions)	40/85/21
0.0056uF (562)	J (5%)	100VDC	1.0% (1kHz, 1Vrms)	30000M (Rated voltage or <100VDC, 1min @ 20C, RH65%)	C/C5%; DF1%; IR50% of specified value	Solder covers 75% of lead circumference	C/C5%, DF1.2*specified value; No visible damage	Pull: 2.2 LBS, 5 sec; No visible damage	Load: 1.1 LBS; Body bent 90 and returned; No visible damage	No visible damage (2h per direction, 3 directions)	40/85/21
0.0068uF (682)	J (5%)	100VDC	1.0% (1kHz, 1Vrms)	30000M (Rated voltage or <100VDC, 1min @ 20C, RH65%)	C/C5%; DF1%; IR50% of specified value	Solder covers 75% of lead circumference	C/C5%, DF1.2*specified value; No visible damage	Pull: 2.2 LBS, 5 sec; No visible damage	Load: 1.1 LBS; Body bent 90 and returned; No visible damage	No visible damage (2h per direction, 3 directions)	40/85/21
0.01uF (103)	J (5%)	100VDC	1.0% (1kHz, 1Vrms)	30000M (Rated voltage or <100VDC, 1min @ 20C, RH65%)	C/C5%; DF1%; IR50% of specified value	Solder covers 75% of lead circumference	C/C5%, DF1.2*specified value; No visible damage	Pull: 2.2 LBS, 5 sec; No visible damage	Load: 1.1 LBS; Body bent 90 and returned; No visible damage	No visible damage (2h per direction, 3 directions)	40/85/21

2410121458_Jimson-PEI102J100D01_C434412.pdf

Quality Capacitor Jimson PEI102J100D01 featuring low dissipation factor and mechanical strength epoxy coating for sale

Capacitor Jimson PEI102J100D01 featuring low dissipation factor and mechanical strength epoxy coating Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!