Home > Thin Film Capacitors >

Capacitor Jimson MEF225K100D06 featuring epoxy resin coating and vacuum evaporated metal electrodes

Product Categories

Fixed Inductors [2693]
RF Filters [248]
Oscillators [540]
Crystals [2945]
Rotary Potentiometers, Rheostats [234]
Programmable Oscillators [242]
Ceramic Filters [216]
Delay Lines [5]
Aluminum Electrolytic Capacitors [2799]
Trimmer Potentiometers [1587]
Aluminum - Polymer Capacitors [1040]
Thumbwheel Potentiometers [25]
Common Mode Chokes [1562]
Chassis Mount Resistors [135]
Chip Resistor - Surface Mount [1995]
Capacitor Kits [6]
Resistor Kits [17]
Cable Ferrites [83]
EMI/RFI Filters (LC, RC Networks) [152]
Ferrite Beads and Chips [1587]
Arrays, Signal Transformers [34]
Value Display Potentiometers [4]
Resistor Networks, Arrays [593]
Through Hole Resistors [711]
Wireless Charging Coils [34]
Film Capacitors [835]
Thin Film Capacitors [914]
Ceramic Capacitors [2764]
Tantalum Capacitors [134]
Current Sense Resistors [124]
Power Line Filter Modules [49]
Resonators [79]
Capacitor Networks, Arrays [24]
Electric Double Layer Capacitors (EDLC), Supercapacitors [3]
Pin Configurable/Selectable Oscillators [13]
Silicon Capacitors [2]
Adjustable Power Resistor [64]
Specialized Resistors [144]
VCOs (Voltage Controlled Oscillators) [81]
Trimmers, Variable Capacitors [9]
Ferrite Cores [96]
Feed Through Capacitors [134]
Slide Potentiometers [123]
Motor Start, Motor Run Capacitors (AC) [29]
SAW Filters [201]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Capacitor Jimson MEF225K100D06 featuring epoxy resin coating and vacuum evaporated metal electrodes

Tolerance : ±10%

Voltage Rating : 100V

Capacitance : 2.2uF

Operating Temperature : -40℃~+85℃

Dielectric Material : Polyester

Description : 2.2uF ±10% 100V Film Capacitor Polyester Through Hole P=20mm

Mfr. Part # : MEF225K100D06

Model Number : MEF225K100D06

Package : Through Hole,P=20mm

Contact Now

Product Overview

The JIMSON ELECTRONICS (XIAMEN) CO.,LTD. MEF Capacitor (2.2/4.7uF K 100VDC) offers high reliability and superior performance in low-frequency applications. Featuring a non-inductive construction and self-healing capabilities, this capacitor is ideal for filtering, noise suppression, pulse, logic, and timing circuits, as well as DC-blocking, by-passing, and signal coupling in communication equipment.

Product Attributes

Brand: JIMSON ELECTRONICS (XIAMEN) CO.,LTD.
Origin: Xiamen, China
Dielectric Material: Polyester film
Electrodes: Vacuum evaporated metal
Coating: Epoxy resin (fire retardant on request)
Leads: Radial leads of tinned wire
Certifications: RoHS 2.0 compliant
Color: Brown (as per outline drawing)

Technical Specifications

Specification	Description	Value	Test Conditions
Capacitance	Rated Capacitance	4.7uF, 2.2uF	Measuring frequency: 1kHz10%, Measuring voltage: 1Vms.max.
Capacitance	Capacitance Tolerance	K=10%
Voltage	Rated Voltage	100VDC	1.6*UR Unit:VDC (5 S at 20)
Voltage Proof		No permanent breakdown or arcing
Dissipation Factor (tangent of loss)		DF0.8%	(C1.0uF) Measuring frequency: 1kHz10%, Measuring voltage: 1Vms.max.
Dissipation Factor (tangent of loss)		DF1.0%	C>1.0uF Measuring frequency: 1kHz10%, Measuring voltage: 1Vms.max.
Insulation Resistance	C0.33uF	IR15000M	Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65%
Insulation Resistance	C0.33uF	IR*C3000S
Endurance	C/C	8%	1000 hours with 125% of rated voltage at 85.
	DF	0.30% (C1uF); DF0.5% (C1uF)
	IR	50% of the specified value;
Climatic Catalogue		40/85/21
Solderability	Solder coverage	75% of the circumference of the lead	Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body
Solderability	Appearance	No visible damage
Heat Shock	C/C	5%	Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body
Heat Shock	DF	1.2*specified value
Lead Tensile Strength		No visible damage	Pull: 2.2 LBS, Time: 5 sec
Lead Bending Strength		No visible damage	Load of lead: 1.1 LBS, The body of capacitor is bent 90 degrees and returned to its original position
Vibration	Appearance	No visible damage	Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction with a total of 6 hours
Reference Standard		IEC384-2 grade 1; SJ/T 10787-1996
Outline Drawing	Model	Capacitance	Color	W Max	H Max	T Max	P 1.0	D 0.05	L +5/-10
	475K100D01	4.7uF	Brown	26.0	21.0	10.0	22.5	0.8	25.0
	225K100D06	2.2uF	Brown	23.0	16.0	10.0	20.0	0.8	25.0
Soldering Suggestion	Maximum Soldering Temperature	270	Time: 4S
Storage Environment and Conditions	Storage Environment	Temperature 30, Humidity 70% (MBB not open)	Storage period: 24 months
Storage Environment and Conditions	Storage Condition	Avoid high temperature and high humidity; presence of hydrogen chloride, hydrogen sulfide, sulfuric acid, etc. in the atmosphere can degrade solderability.	Store under specified storage environment conditions.

2409291103_Jimson-MEF225K100D06_C434291.pdf

Quality Capacitor Jimson MEF225K100D06 featuring epoxy resin coating and vacuum evaporated metal electrodes for sale

Capacitor Jimson MEF225K100D06 featuring epoxy resin coating and vacuum evaporated metal electrodes Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!