| Rated Capacitance | | 0.47uF | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. |
| Capacitance Tolerance | | K=10% | |
| Rated Voltage | | 450VDC | |
| Voltage Proof | | 1.6*UR Unit:VDC (5 S at 20) | No permanent breakdown or arcing |
| Dissipation Factor (tangent of loss) | () | DF0.8% | (C1.0uF), Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. |
| DF1.0% | C>1.0uF, Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. |
| Insulation Resistance | | IR15000M | C0.33uF, measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| IR*C3000S | C0.33uF, measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Endurance | | C/C8%; DF0.30% (C1uF); DF0.5% (C1uF); IR 50%of the specified value; | 1000 hours with 125% of rated voltage at 85. |
| Climatic Catalogue | | 40/85/21 | |
| Solder ability | | Solder should cover at least 75% of the circumference of the lead | solder bath : 2355, bath time: 2.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body |
| 75% | |
| Heat shock | | C/C5% DF1.2* | solder bath : 2605, bath time: 5.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body |
| |
| Lead tensile strength | | | Pull2.2 LBS, time: 5 sec |
| Lead bending strength | | | Load of lead1.1 LBS, The body of capacitor is bent 90 degrees and returned to its original position |
| Vibration | | | Frequency cycle: from 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each directions with a total of 6 hours |
| Reference standard | | IEC384-2 grade 1; SJ/T 10787-1996 | |
| Outline Drawing | | W Max: 18.0, H Max: 16.0, T Max: 7.5, P 1.0: 15.0, D 0.05: 0.8, L +5/-10: 25.0 | |
| Marking | | Rated capacitance, Rated voltage, Capacitance tolerance, Manufacturer's symbol: JIMSON (JS). | UV ink or laser printing |
| Storage Period | | 24 months | Storage temperature 30, humidity 70%, MBB not open |
