| Rated Capacitance | Nominal Value | 0.68uF | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms max. |
| Capacitance Tolerance | J | 5% | |
| Rated Voltage | DC Voltage | 450VDC | 1.6*UR Unit:VDC (5 S at 20) |
| Voltage Proof | No permanent breakdown or arcing | | |
| Dissipation Factor (tan ) | DF | 0.1% | (at 20, 1KHz), Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms max. |
| Insulation Resistance | C0.33uF | 30000M | measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| C0.33uF | IR*C5000S |
| Endurance | C/C5%; DF0.4%; IR50% of the specified value | | 1000 hours with 125% of rated voltage at 85. |
| Climatic Catalogue | | 40/105/21 | |
| Solderability | Solder should cover at least 75% of the circumference of the lead | | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body |
| Heat Shock | C/C5% DF1.2* | | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body |
| Lead Tensile Strength | No visible damage | Pull: 2.2 LBS | Time: 5 sec |
| Lead Bending Strength | No visible damage | Load: 1.1 LBS | The body of capacitor is bent 90 degrees and returned to its original position |
| Vibration | No visible damage | | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction |
| Reference Standard | | IEC 60384-16, GB10190 | |
| Construction - Dielectric | | Polypropylene film | |
| Construction - Electrodes | | Vacuum evaporated metal | |
| Construction - Coating | | Epoxy resin, fire retardant on request | |
| Construction - Leads | | Radial leads of tinned wire/insulation flexible wire | |
| Construction - Terminal Contact | | Electrically welded | |
| Feature | High stability of capacitance and DF versus temperature and frequency | | |
| Feature | Low DF and high IR | | |
| Feature | Non-inductive and self-healing | | |
| Feature | Very small inherent temperature rise | | |
| Application | General resonance circuit | | |
| Application | Widely used in DC pulse, high frequency and low current circuit | | |
| Application | Providing optimum performance with small size of in S-shaping correction of colour TV set | | |
| Marking - Individual Capacitor | Rated capacitance, Rated voltage, Capacitance tolerance, Manufacturer's symbol | e.g., 684J450VDC | |
| Marking - Package | Type, rating, quantity, date of manufacture, location of manufacture, manufacturer's name | | |
| Explanation - Rated Capacitance | Expressed by a three-digit number (e.g., 224 = 220,000pF or 0.22uF) | | Unit: PF |
| Explanation - Capacitance Tolerance | Permissible actual capacitance relative to rated capacitance | F=1%, G=2%, J=5%, K=10%, M=20%, N=30% | |
| Explanation - Dissipation Factor | Measure of power loss in a capacitor under AC voltage | | Measured at 20 and 1kHz |
| Explanation - Insulation Resistance | Ratio between applied DC voltage and current after 1 minute charging | | T=20, RH65% |
| Explanation - Self-healing | Ability to withstand breakdown without permanent short circuit | | |
| Weatherability - High Temperature | Capacitance drift: +5% max of initial value; DF change: <0.2% (at 1KHz) | | +85 |
| Weatherability - Low Temperature | Capacitance drift: -5% max of initial value; DF change: <0.15% (at 1KHz) | | -40 |
| Weatherability - Humidity | Capacitance drift: +3% max of initial value; DF: <0.15% (at 1KHz); IR: >50% of initial value | | 403, 90-95% RH for 964% hrs, then 16 hrs recovery |
| Dimension | | W: 18.0, H: 15.0, T: 8.0, P: 15.01.0, D: 0.80.05, L: 25.0 | unit: mm |
