| Capacitance | Rated Capacitance: 0.0022uF ~ 0.47uF | Measuring frequency: 1kHz10%
Measuring voltage: 1Vrms max. |
| Capacitance Tolerance | J = 5%, K = 10% | |
| Voltage | Rated Voltage: 1000VDC | |
| Voltage Proof | 1.6*UR (1 minute at 20) | No permanent breakdown or flashover |
| Dissipation Factor (tan) | DF 0.1% | at 20, 1kHz (Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms max.) |
| Insulation Resistance | C 0.33uF: IR 30000M
C > 0.33uF: IR*C 5000S | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Endurance | C/C 5%; DF 0.40%; IR 50% of the specified value | 1000 hours with 125% of rated voltage at 85. After the test. |
| Climatic Catalogue | 40/85/21 | |
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355
Bath time: 2.00.5 sec
Speed: 256 mm/sec
Depth: 1.5+0.5/-0mm from the bottom of the body |
| Heat Shock | C/C 5%, DF 1.2*specified value. Capacitor appearance should be free from visible damage after the test. | Solder bath: 2605
Bath time: 5.00.5 sec
Speed: 256 mm/sec
Depth: 1.5+0.5/-0mm from the bottom of the body |
| Lead Tensile Strength | No damage to leads. | Pull: 2.2 LBS, Time: 5 sec |
| Lead Bending Strength | No damage to leads. | Load of lead: 1.1 LBS. The body of capacitor is bent 90 degrees and returned to its original position. |
| Vibration | No visible damage to appearance. | Frequency cycle: 10Hz to 55Hz and then 10Hz
Amplitude: 1.5mm in three directions
Time: 2 hours each direction, total 6 hours. |
| Reference Standard | IEC 384-16, GB10190 | |
| Dimensions (mm) | | Model | Capacitance | Color | W | H | T | P | D | L |
|---|
| 222J1000D02 | 0.0022uF | Yellow | 13.0 | 11.0 | 5.0 | 10.0 | 0.6 | 25.0 | | 222K1000D01 | 0.0022uF | Yellow | 13.0 | 11.0 | 5.0 | 10.0 | 0.6 | 25.0 | | 333J1000VDC | 0.033uF | Yellow | 18.0 | 10.0 | 5.0 | 15.0 | 0.8 | 25.0 | | 154K1000D01 | 0.15uF | Yellow | 18.0 | 14.5 | 8.5 | 15.0 | 0.8 | 25.0 | | 104K1000D01 | 0.1uF | Yellow | 26.5 | 16.0 | 17.0 | 22.5 | 0.8 | 25.0 | | 474J1000D01 | 0.47uF | Yellow | 26.5 | 22.0 | 12.0 | 22.5 | 0.8 | 25.0 | | |
| Soldering Suggestion | Maximum Soldering Temperature: 270, 4S. Pre-heating: 105, 1min. | |
| Storage Environment | Temperature 30, Humidity 70% (MBB unopened for 24 months storage). Avoid high temperature, high humidity, and atmospheric contaminants (hydrogen chloride, hydrogen sulfide, sulfuric acid). | |
