Home > Film Capacitors >

Electronic capacitor Jimson MPA105K1200D01 with low dissipation factor and high insulation resistance

Product Categories

Fixed Inductors [2693]
RF Filters [248]
Oscillators [540]
Crystals [2945]
Rotary Potentiometers, Rheostats [234]
Programmable Oscillators [242]
Ceramic Filters [216]
Delay Lines [5]
Aluminum Electrolytic Capacitors [2799]
Trimmer Potentiometers [1587]
Aluminum - Polymer Capacitors [1039]
Thumbwheel Potentiometers [25]
Common Mode Chokes [1562]
Chassis Mount Resistors [135]
Chip Resistor - Surface Mount [1995]
Capacitor Kits [6]
Resistor Kits [17]
Cable Ferrites [83]
EMI/RFI Filters (LC, RC Networks) [152]
Ferrite Beads and Chips [1587]
Arrays, Signal Transformers [34]
Value Display Potentiometers [4]
Resistor Networks, Arrays [593]
Through Hole Resistors [711]
Wireless Charging Coils [34]
Film Capacitors [835]
Thin Film Capacitors [914]
Ceramic Capacitors [2764]
Tantalum Capacitors [134]
Current Sense Resistors [124]
Power Line Filter Modules [49]
Resonators [79]
Capacitor Networks, Arrays [24]
Electric Double Layer Capacitors (EDLC), Supercapacitors [3]
Pin Configurable/Selectable Oscillators [13]
Silicon Capacitors [2]
Adjustable Power Resistor [64]
Specialized Resistors [144]
VCOs (Voltage Controlled Oscillators) [81]
Trimmers, Variable Capacitors [9]
Ferrite Cores [96]
Feed Through Capacitors [134]
Slide Potentiometers [123]
Motor Start, Motor Run Capacitors (AC) [29]
SAW Filters [201]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Electronic capacitor Jimson MPA105K1200D01 with low dissipation factor and high insulation resistance

Capacitance : 1uF

Tolerance : ±10%

Voltage Rating : 1.2kV

Description : 1uF Film Capacitor ±10% 1.2kV Through Hole 23x46mm

Mfr. Part # : MPA105K1200D01

Model Number : MPA105K1200D01

Package : Through Hole,23x46mm

Contact Now

Product Overview

The JIMSON MPA series capacitors are designed for a wide range of electronic applications. Featuring a non-inductive construction and self-healing properties, these capacitors offer low dissipation factor (DF) and high insulation resistance (IR), resulting in very small inherent temperature rise. They are ideal for coupling, decoupling, by-passing, timing circuits, across-the-line applications, spark killers, charging/discharging circuits, lighting, noise suppression, and frequency modulation.

Product Attributes

Brand: JIMSON (JS)
Customer: (LICHUANG)
Product Type: Capacitor
Series: MPA
Dielectric: Polypropylene film
Electrodes: Vacuum evaporated metal
Coating: Out wrapped with Mylar tape and ends sealed with epoxy resin
Leads: Solder-plated copper-clad wire
Terminal Contact: Electrically welded
Certifications: RoHS Compliant (RoHS 2.0)
Origin: Xiamen, China

Technical Specifications

Model	Rated Capacitance	Capacitance Tolerance	Rated Voltage	W (Max)	H (Max)	T (Max)	P (±1.0)	d (±0.05)	L (±5.0)	Color
104K1200D01	0.1uF	K (±10%)	1200VDC	26.0 mm	15.0 mm	8.5 mm	26.0 mm	0.8 mm	35.0 mm	Brown
224K1200D01	0.22uF	K (±10%)	1200VDC	26.0 mm	19.0 mm	12.0 mm	26.0 mm	0.8 mm	40.0 mm	Brown
474K1200D01	0.47uF	K (±10%)	1200VDC	32.0 mm	25.0 mm	16.0 mm	32.0 mm	0.8 mm	40.0 mm	Brown
105K1200D01	1.0uF	K (±10%)	1200VDC	46.0 mm	23.0 mm	14.0 mm	46.0 mm	0.8 mm	35.0 mm	Brown

Specification	Value	Test Conditions
Rated Capacitance	0.1uF, 0.22uF, 0.47uF, 1.0uF	Frequency: 1kHz±10%, Voltage: 1Vrms max.
Capacitance Tolerance	K = ±10%
Rated Voltage	1200VDC	1.6*UR, 5s at 20
Voltage Proof	No permanent breakdown or flashover
Dissipation Factor (DF)	≤0.1%	Frequency: 1kHz±10%, Voltage: 1Vrms max.
Insulation Resistance (IR)	C ≤ 0.33uF: ≥ 30000MΩ C > 0.33uF: IR*C ≥ 5000S	Rated voltage or less than 100VDC, 1 minute at 20 and RH≤65%
Endurance	ΔC/C ≤ 5%; ΔDF ≤ 0.40%; IR ≥ 50% of specified value	1000 hours with 125% of rated voltage at 85
Climatic Catalogue	40/85/21
Solderability	Solder should cover at least 75% of the circumference of the lead	Solder bath: 235±5, Time: 2.0±0.5 sec, Speed: 25±6 mm/sec, Depth: 1.5+0.5/-0mm from bottom of body
Heat Shock	ΔC/C ≤ ±5%, DF ≤ 1.2 times specified value; Appearance without visible damage	Solder bath: 260±5, Time: 5.0±0.5 sec, Speed: 25±6 mm/sec, Depth: 1.5+0.5/-0mm from bottom of body
Lead Tensile Strength	No visible damage	Pull: 2.2 LBS, Time: 5 sec
Lead Bending Strength	No visible damage	Load of lead: 1.1 LBS, Body bent 90 degrees and returned to original position
Vibration	No visible damage	Frequency cycle: 10Hz to 55Hz to 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (6 hours total)
Reference Standard	IEC 384-16, GB10190
Storage Environment	Temp ≤ 30, Humidity ≤ 70% (in MBB)	Guarantees 24 months storage period if MBB is not opened. Avoid high temperature and humidity.
Soldering Suggestion (Max)	Pre-heating: 105 (1min), Soldering: 270 (4s)

Features

Non-inductive construction and self-healing
Low DF and high IR
Very small inherent temperature rise

Applications

Coupling, decoupling, by-passing and timing circuits
Across-the-line, Spark killer
Charging/discharging, lighting, noise suppression and frequency modulation

Marking

Individual Capacitor: Rated capacitance (e.g., 104), Rated voltage (e.g., 1200VDC), Capacitance tolerance (e.g., K), Manufacturer's symbol (JIMSON (JS)).
Package Label: Product model, rating, quantity, date of manufacture, location of manufacture, and manufacturer's name.

2410121458_Jimson-MPA105K1200D01_C434395.pdf

Quality Electronic capacitor Jimson MPA105K1200D01 with low dissipation factor and high insulation resistance for sale

Electronic capacitor Jimson MPA105K1200D01 with low dissipation factor and high insulation resistance Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!