Home > Film Capacitors >

High reliability capacitor KYET MMKP123J3A1001 with double sided metallized polyester film electrodes

Product Categories

Fixed Inductors [2693]
RF Filters [248]
Oscillators [540]
Crystals [2945]
Rotary Potentiometers, Rheostats [234]
Programmable Oscillators [242]
Ceramic Filters [216]
Delay Lines [5]
Aluminum Electrolytic Capacitors [2799]
Trimmer Potentiometers [1587]
Aluminum - Polymer Capacitors [1039]
Thumbwheel Potentiometers [25]
Common Mode Chokes [1562]
Chassis Mount Resistors [135]
Chip Resistor - Surface Mount [1995]
Capacitor Kits [6]
Resistor Kits [17]
Cable Ferrites [83]
EMI/RFI Filters (LC, RC Networks) [152]
Ferrite Beads and Chips [1587]
Arrays, Signal Transformers [34]
Value Display Potentiometers [4]
Resistor Networks, Arrays [593]
Through Hole Resistors [711]
Wireless Charging Coils [34]
Film Capacitors [835]
Thin Film Capacitors [914]
Ceramic Capacitors [2764]
Tantalum Capacitors [134]
Current Sense Resistors [124]
Power Line Filter Modules [49]
Resonators [79]
Capacitor Networks, Arrays [24]
Electric Double Layer Capacitors (EDLC), Supercapacitors [3]
Pin Configurable/Selectable Oscillators [13]
Silicon Capacitors [2]
Adjustable Power Resistor [64]
Specialized Resistors [144]
VCOs (Voltage Controlled Oscillators) [81]
Trimmers, Variable Capacitors [9]
Ferrite Cores [96]
Feed Through Capacitors [134]
Slide Potentiometers [123]
Motor Start, Motor Run Capacitors (AC) [29]
SAW Filters [201]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

High reliability capacitor KYET MMKP123J3A1001 with double sided metallized polyester film electrodes

Capacitance : 12nF

Operating Temperature : -40℃~+105℃

Tolerance : ±5%

Voltage Rating : 1kV

Description : 12nF Film Capacitor ±5% 1kV Through Hole P=10mm

Mfr. Part # : MMKP123J3A1001

Model Number : MMKP123J3A1001

Package : Through Hole,P=10mm

Contact Now

Product Overview

The MMKP82 is a double-sided metallized polypropylene film capacitor (box-type) from Dongguan Keya Electronic Technology Co., LTD. It features excellent flame resistance, low loss, and a negative temperature coefficient of capacitance. This capacitor is widely used in high-voltage, high-frequency pulse circuits, electronic ballasts, compact lamps, and SNUBBER and SCR commutating circuits.

Product Attributes

Brand: KYET (Dongguan Keya Electronic Technology Co., LTD)
Origin: Dongguan, China
Material: Polypropylene film dielectric, double-sided metallized polyester film electrodes, tin-plated copper wire leads, flame retardant epoxy resin encapsulation.
Color: Grey casing ()

Technical Specifications

Item	Performance Requirement	Test Method	Details
Applicable Temperature Range	-40 +105	GB/T 10190 (IEC 60384-16)
Rated Voltage (UR)	400VDC/630VDC/1000VDC/1250VDC/1600VDC/2000VDC/3000VDC
Capacitance Range	0.00221.8 F
Capacitance Tolerance	2%(G), 3%(H), 5%(J), 10%(K)	Ref. item 4.2.2	1kHz
Dissipation Factor (tg)	0.0010	Ref. item 4.2.3	(20, 1KHz, 0.1V)
Withstand Voltage	1.6UR, 5s	Ref. item 4.2.1	No breakdown or arcing
Insulation Resistance (IR)	IR50000M, CN0.33 F; IR30000, CN>0.33 F	Ref. item 4.2.4	(100V, 20, 1min)
Solderability	Good tin plating	Ref. item 4.5	Soldering bath method Tb, method 1A (leakage current set to 20mA), Solder temperature: 2352, Immersion time: 2.00.5s
Lead Strength (Tensile)	0.5 d0.8mm, 10N; 1.0 d1.2mm, 20N	Ref. item 4.3
Lead Strength (Bending)	0.5 d0.8mm, 5N; 1.0 d1.2mm, 10N	Ref. item 4.3	Two consecutive bends in each direction
Resistance to Soldering Heat	No visible damage, clear marking	Ref. item 4.4	Soldering bath method Tb, method 1A, 2605, 101s
Rapid Change of Temperature	No visible damage, clear marking	Ref. item 4.6	QA=-40, QB=+105, 5 cycles, duration: t=30min
Climatic Sequence (Dry Heat, Cyclic Damp Heat, Cold)	No visible damage, clear marking	Ref. item 4.10.2, 4.10.3, 4.10.4, 4.10.6	+105, 16h (Dry Heat); Test Db, Severity b (Cyclic Damp Heat); -40, 2h (Cold); UR applied for 1 min after test.
Damp Heat (Steady State)	No obvious bulging, clear marking	Ref. item 4.11	Temperature: 85, Humidity: 85%RH, Duration: 48H
Endurance	No visible damage, clear marking	Ref. item 4.12	+85, 1000h, Applied voltage: 1.25 times rated voltage
Characteristics with Temperature Variation		Ref. item 4.2.6	At points b, d, f. Lower category temp (-40): 0(Cb-Cd)/Cd+3%. Upper category temp (110): -4%(Cf-Cd)/Cd0. Charging voltage is rated voltage. Static method, capacitor held at each temperature sequentially.
Charge and Discharge	No cracking, no burning.	Ref. item 4.13	Cycles: 10000. Charging time: 0.5s. Discharging time: 0.5s. Charging voltage is rated voltage. Charging resistance: 220/CR (). Discharging resistance: 10/CR() or 20 (whichever is greater). CR is nominal capacitance ( F).
Pulse Voltage	No cracking, no burning.		Cycles: 24. Pulse voltage: 1.8UR.
Ripple Current	No cracking, no burning.		Ripple current: 10A. DC bias = rated voltage - ripple voltage. Test time: 5 hours. Test frequency: 100KHZ.
Flame Retardancy Test		IEC695-2-2 Needle Flame Test, Flame resistance category C	After leaving flame, any capacitor's continuous burning time not exceeding 30S, and the dripping of the capacitor shall not ignite the cotton paper laid underneath.

Maximum Pulse Rise Time (dV/dt)

If the working voltage (U) is lower than the rated voltage (UR), the capacitor can operate at a higher dV/dt. The allowable dV/dt value should be obtained by multiplying the right table value with UR/U.

UR(V)	dV/dt(v/s) for P=7.5	dV/dt(v/s) for P=10.0	dV/dt(v/s) for P=15.0	dV/dt(v/s) for P=22.5	dV/dt(v/s) for P=27.5
250	1200	1000	550	250	200
400	1800	1500	900	500	300
630	3200	3200	2500	1500	900
1000	6000	6000	3300	2100	1000
1600	-------	-------	6000	3000	2000
2000	-------	-------	10000	5000	2200

2411211936_KYET-MMKP123J3A1001_C2991054.pdf

Quality High reliability capacitor KYET MMKP123J3A1001 with double sided metallized polyester film electrodes for sale

High reliability capacitor KYET MMKP123J3A1001 with double sided metallized polyester film electrodes Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!