| Scope | Application | KYET Metallized Polypropylene Film Capacitor (MPP/CBB81/CBB21/CBB22) |
| Standard Atmospheric Conditions | Ambient Temperature | 15 to 35 (20 5 for doubt) |
| Standard Atmospheric Conditions | Relative Humidity | 45% to 75% (60% to 70% for doubt) |
| Standard Atmospheric Conditions | Air Pressure | 86 kpa to 106 kpa |
| Operating Temperature Range | Continuous Operation | -40 to +100 at rated voltage |
| Construction | Dielectric | Metallized Polypropylene Film |
| Construction | Metal Spray | Special Solder |
| Construction | Lead Wire | Tinned Copper-clad Steel Wire |
| Marking | Manufacturer Symbol | KYET ELECTRONICS CO., LTD |
| Marking | Type/Material | MPP (Metallized Polypropylene Film) |
| Marking | Capacitor Class | CBB22 |
| Marking | Nominal Capacitance | Expressed in 3-digit (EIA) code |
| Marking | Tolerance | J (5%), K (10%), M (20%) |
| Marking | Rated Voltage | 100, 250, 400, 450, 630, 1000, 1250, 1600, 2000 VDC |
| Marking | Operating Temperature Range | -40100 |
| Electrical Characteristics | Dissipation Factor (DF) | Max 0.1% (at 1KHz, 25) |
| Electrical Characteristics | Insulation Resistance (I.R.) | CR0.33F: IR10000M; CR0.33F: IR5000M/F (UR100V) |
| Electrical Characteristics | Withstand Voltage (Terminals) | 1.5*Ur (DC) for 60 sec. |
| Electrical Characteristics | Withstand Voltage (Terminals & Enclosure) | 2*Ur+500V, Min. 1000VDC for 2 to 5 sec. |
| Electrical Characteristics | Dissipation Factor (DF) | 0.001 (0.1%) at 1 KHz |
| Electrical Characteristics | Capacitance (CAP) | Within specified tolerance at +20 5 |
| Electrical Characteristics | Insulation Resistance (I.R.) | 10,000 Mohm (C0.33uf); 5,000 Mohm*uF/C (C>0.33uf) at 100 VDC, 605 sec. charge time. |
| Electrical Characteristics | Soldering Property | >90% of circumferential surface of lead wire covered with solder. Soldering Temp: +260 5, Immersion: 2 0.5 sec. |
| Mechanical Characteristics | Terminal Strength (Tensile) | Apply 1.0Kg for 10 1 sec. in axial direction. |
| Endurance Characteristics | Temperature Cycle | 5 cycles (-40 to +100). Appearance: No remarkable change. Withstand Voltage: Satisfy NO.5.1. Capacitance Change Rate: <5%. Dissipation Factor: Max 0.002 (0.2%) @ 1KHz. Insulation Resistance: 50% of limit value in NO.5.4. |
| Endurance Characteristics | Dry Heat Resistance | +100 2 for 16 1 hrs. Appearance: No remarkable change. Withstand Voltage: Satisfy NO.5.1. Capacitance Change Rate: <5%. Dissipation Factor: Max 0.002 (0.2%) @ 1KHz. Insulation Resistance: 50% of limit value in NO.5.4. |
| Endurance Characteristics | Cold Resistance | -40 3 for 2 1 hrs. Appearance: No remarkable change. Withstand Voltage: Satisfy NO.5.1. Capacitance Change Rate: <5%. Dissipation Factor: Max 0.002 (0.2%) @ 1KHz. Insulation Resistance: 50% of limit value in NO.5.4. |
| Endurance Characteristics | Damp Heat | +40 2, 90% to 95% R.H. for 2 1 hrs. Appearance: No remarkable change. Withstand Voltage: Satisfy NO.5.1. Capacitance Change Rate: <5%. Dissipation Factor: Max 0.002 (0.2%) @ 1KHz. |
