| Rated Capacitance | 0.0022F ~ 0.47F | Measuring frequency: 1kHz10%
Measuring voltage: 1Vrms max. |
| Capacitance Tolerance | J = 5%
K = 10% | |
| Rated Voltage | 630VDC, 630VAC | |
| Voltage Proof | 1.6 * UR (VDC) (1 minute at 20) | No permanent breakdown or flashover |
| Dissipation Factor (tan ) | 0.1% | at 20, 1kHz
Measuring frequency: 1kHz10%
Measuring voltage: 1Vrms max. |
| Insulation Resistance | C 0.33F: IR 30000 M
C > 0.33F: IR * C 5000 S | Measured at rated voltage or less than 100VDC
1 minute at 20 and RH 65% |
| Endurance | C/C 5%; DF 0.40%; IR 50% of specified value | 1000 hours with 125% of rated voltage at 85 |
| Climatic Catalogue | 40/85/21 | |
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355
Bath time: 2.00.5 sec
Speed: 256 mm/sec
Depth: 1.5+0.5/-0 mm from the bottom of the body |
| Heat Shock (Soldering Heat) | C/C 5%, DF 1.2 * specified value. Capacitor appearance should be free from visible damage after test. | Solder bath: 2605
Bath time: 5.00.5 sec
Speed: 256 mm/sec
Depth: 1.5+0.5/-0 mm from the bottom of the body |
| Lead Tensile Strength | Appearance free from damage | Pull: 2.2 LBS, Time: 5 sec |
| Lead Bending Strength | Appearance free from damage | Load of lead: 1.1 LBS
The body of capacitor is bent 90 degrees and returned to its original position |
| Vibration | Appearance free from visible damage | Frequency cycle: 10Hz to 55Hz and then 10Hz
Amplitude: 1.5mm in three directions
Time: 2 hours each direction (total 6 hours) |
| Reference Standard | IEC 384-16, GB10190 | |
| Marking | Rated capacitance, Rated voltage, Capacitance tolerance, Manufacturer's symbol (JIMSON/JS) | UV ink or laser engraving |
| Package Marking | Type, rating, quantity, date of manufacture, location of manufacture, manufacturer's name | |
| Storage Environment | Temperature 30, Humidity 70% (MBB unopened for 24 months) | |
| Soldering Suggestion (Max Temp) | Pre-heating: 105 (1 min)
Soldering: 270 (4 sec) | |
