| Rated Capacitance Values | 0.22nF, 2.2nF, 5.6nF, 10nF, 22nF | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms max. |
| Capacitance Tolerance | K=10%, J=5% | - |
| Rated Voltage | 1000VDC, 1600VDC, 2000VDC, 2500VDC | - |
| Voltage Proof | No permanent breakdown or flashover | (5s at 20) |
| Dissipation Factor (tan ) | 0.1% | at 20, 1kHz |
| Insulation Resistance (IR) | C 0.1uF: IR 30000 M
C > 0.1uF: IR*C 5000 S | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Endurance | C/C 10%; DF 0.3%; IR 50% of specified value | 1000 hours with 125% of rated voltage at 85 |
| Climatic Category | 40/85/21 | - |
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, bath time: 2.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body |
| Heat Shock (Soldering Heat) | C/C 5%, DF 1.2*specified value. Appearance: no visible damage. | Solder bath: 2605, bath time: 5.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body |
| Lead Tensile Strength | No visible damage. | Pull: 2.2 LBS, time: 5 sec |
| Lead Bending Strength | No visible damage. | Load of lead: 1.1 LBS. The body of capacitor is bent 90 degrees and returned to its original position. |
| Vibration | No visible damage. | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) |
| Reference Standard | IEC 60384-17, GB 14579 | - |
| Soldering Suggestion (Max) | Pre-heating: 105, 1min; Soldering: 270, 4s | - |
| Storage Environment | Temperature 30, Humidity 70% (MBB unopened) | Ensures 24 months storage period. Avoid atmosphere with hydrogen chloride, hydrogen sulfide, sulfuric acid. Avoid high temperature and high humidity. |
