Home > Film Capacitors >

MPP capacitor Jimson MPP684K630D05 with high capacitance stability and low inherent temperature rise

Product Categories

Fixed Inductors [2693]
RF Filters [248]
Oscillators [540]
Crystals [2945]
Rotary Potentiometers, Rheostats [234]
Programmable Oscillators [242]
Ceramic Filters [216]
Delay Lines [5]
Aluminum Electrolytic Capacitors [2799]
Trimmer Potentiometers [1587]
Aluminum - Polymer Capacitors [1039]
Thumbwheel Potentiometers [25]
Common Mode Chokes [1562]
Chassis Mount Resistors [135]
Chip Resistor - Surface Mount [1995]
Capacitor Kits [6]
Resistor Kits [17]
Cable Ferrites [83]
EMI/RFI Filters (LC, RC Networks) [152]
Ferrite Beads and Chips [1587]
Arrays, Signal Transformers [34]
Value Display Potentiometers [4]
Resistor Networks, Arrays [593]
Through Hole Resistors [711]
Wireless Charging Coils [34]
Film Capacitors [835]
Thin Film Capacitors [914]
Ceramic Capacitors [2764]
Tantalum Capacitors [134]
Current Sense Resistors [124]
Power Line Filter Modules [49]
Resonators [79]
Capacitor Networks, Arrays [24]
Electric Double Layer Capacitors (EDLC), Supercapacitors [3]
Pin Configurable/Selectable Oscillators [13]
Silicon Capacitors [2]
Adjustable Power Resistor [64]
Specialized Resistors [144]
VCOs (Voltage Controlled Oscillators) [81]
Trimmers, Variable Capacitors [9]
Ferrite Cores [96]
Feed Through Capacitors [134]
Slide Potentiometers [123]
Motor Start, Motor Run Capacitors (AC) [29]
SAW Filters [201]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

MPP capacitor Jimson MPP684K630D05 with high capacitance stability and low inherent temperature rise

Capacitance : 680nF

Operating Temperature : -40℃~+85℃

Tolerance : ±10%

Voltage Rating : 630V

Description : 680nF Film Capacitor ±10% 630V Through Hole

Mfr. Part # : MPP684K630D05

Model Number : MPP684K630D05

Package : Through Hole,P=20mm

Contact Now

Product Overview

The JIMSON ELECTRONICS (XIAMEN) CO.,LTD. MPP Capacitor is a high-stability, low-loss, non-inductive, and self-healing capacitor designed for general resonance circuits, DC pulse, high-frequency, and low-current applications. It is particularly suitable for S-shaping correction circuits in color TV sets, offering optimal performance with a small size. Key features include high capacitance and dissipation factor stability over temperature and frequency, very small inherent temperature rise, and a robust construction utilizing polypropylene film dielectric and vacuum-evaporated metal electrodes.

Product Attributes

Brand: JIMSON (JS)
Manufacturer: / JIMSON ELECTRONICS (XIAMEN) CO.,LTD.
Product Type: Capacitor
Category: MPP
Dielectric: Polypropylene film
Electrodes: Vacuum evaporated metal
Coating: Epoxy resin (fire retardant on request)
Leads: Radial leads of tinned wire/insulation flexible wire
Terminal Contact: Electrically welded; Arc spot welding
Color: Brown
Certifications: In compliance with RoHS 2.0 environmental directive

Technical Specifications

Specification	Description / Value	Test Conditions
Rated Capacitance	0.0022uF ~ 1.0uF	Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms.max.
Capacitance Tolerance	J=5%, K=10%
Rated Voltage	630VDC, 63VDC
Voltage Proof	No permanent breakdown or arcing	1.6*UR Unit:VDC (5 S at 20)
Dissipation Factor (DF)	DF0.1%	at 20, 1KHz; Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms.max.
Insulation Resistance (IR)	C0.33uF: IR30000M C0.33uF: IR*C5000S	measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65%
Endurance	C/C5%; DF0.4%; IR50% of the specified value	1000 hours with 125% of rated voltage at 85.
Climatic Catalogue	40/85/21
Solderability	Solder should cover at least 75% of the circumference of the lead	Solder bath: 2355; Bath time: 2.00.5 sec; Speed: 256 mm/sec; Depth: 1.5+0.5/-0mm from the bottom of the body
Heat Shock	C/C5%, DF1.2* (Appearance without visible damage)	Solder bath: 2605; Bath time: 5.00.5 sec; Speed: 256 mm/sec; Depth: 1.5+0.5/-0mm from the bottom of the body
Lead Tensile Strength	No visible damage	Pull: 2.2 LBS; Time: 5 sec
Lead Bending Strength	No visible damage	Load of lead: 1.1 LBS (The body of capacitor is bent 90 degrees and returned to its original position)
Vibration	No visible damage	Frequency cycle: 10Hz to 55Hz and then 10Hz; Amplitude: 1.5mm in three directions; Time: 2 hours each direction (total 6 hours)
Reference Standard	IEC 60384-16, GB10190
Capacitance Unit Conversion	1F=1,000mF=1,000,000uF=1,000,000,000nF=1,000,000,000,000Pf
Tolerance Symbols	F=1%, G=2%, J=5%, K=10%, M=20%, N=30%
High Temperature Test	Capacitance drift: +5% max of initial value; DF: <0.2% (at 1KHz)	+85
Low Temperature Test	Capacitance drift: -5% max of initial value; DF: <0.15% (at 1KHz)	-40
Humidity Test	Capacitance drift: +3% max of initial value; DF: <0.20%; Insulation resistance: >50% of initial value	403, 90-95% RH for 964% hrs, then 16 hrs at room temp.
Soldering Temperature	Pre-heating: 105 1min; Soldering: 270 4S
Storage Environment	Temp 30, Humidity 70% (MBB not opened for 24 months storage)
Model Example: 222J630D01	Capacitance: 0.0022uF, Tolerance: J (5%), Voltage: 630VDC	W: 13.0mm, H: 8.0mm, T: 5.0mm, P: 10.0mm, D: 0.6mm, L: 25.0mm
Model Example: 103J630D01	Capacitance: 0.01uF, Tolerance: J (5%), Voltage: 630VDC	W: 12.0mm, H: 10.0mm, T: 6.8mm, P: 10.0mm, D: 0.6mm, L: 25.0mm
Model Example: 223J630D01	Capacitance: 0.022uF, Tolerance: J (5%), Voltage: 630VDC	W: 13.0mm, H: 10.0mm, T: 6.0mm, P: 10.0mm, D: 0.6mm, L: 25.0mm
Model Example: 273J630D01	Capacitance: 0.027uF, Tolerance: J (5%), Voltage: 630VDC	W: 13.0mm, H: 12.0mm, T: 7.0mm, P: 10.0mm, D: 0.6mm, L: 25.0mm
Model Example: 104K630D02	Capacitance: 0.1uF, Tolerance: K (10%), Voltage: 630VDC	W: 13.0mm, H: 11.0mm, T: 8.0mm, P: 10.0mm, D: 0.6mm, L: 25.0mm
Model Example: 104K630D03	Capacitance: 0.1uF, Tolerance: K (10%), Voltage: 630VDC	W: 18.0mm, H: 12.5mm, T: 7.5mm, P: 15.0mm, D: 0.8mm, L: 25.0mm
Model Example: 224J630VDC	Capacitance: 0.22uF, Tolerance: J (5%), Voltage: 630VDC	W: 18.0mm, H: 14.5mm, T: 9.0mm, P: 15.0mm, D: 0.8mm, L: 25.0mm
Model Example: 105K630D04	Capacitance: 1.0uF, Tolerance: K (10%), Voltage: 630VDC	W: 18.0mm, H: 15.0mm, T: 7.5mm, P: 15.0mm, D: 0.8mm, L: 25.0mm
Model Example: 334K630D01	Capacitance: 0.33uF, Tolerance: K (10%), Voltage: 630VDC	W: 23.0mm, H: 12.0mm, T: 7.0mm, P: 20.0mm, D: 0.8mm, L: 25.0mm
Model Example: 564K630D01	Capacitance: 0.56uF, Tolerance: K (10%), Voltage: 630VDC	W: 23.0mm, H: 14.0mm, T: 9.0mm, P: 20.0mm, D: 0.8mm, L: 25.0mm
Model Example: 684K630D05	Capacitance: 0.68uF, Tolerance: K (10%), Voltage: 630VDC	W: 23.0mm, H: 15.0mm, T: 9.0mm, P: 20.0mm, D: 0.8mm, L: 25.0mm
Model Example: 474J630D06	Capacitance: 0.47uF, Tolerance: J (5%), Voltage: 630VDC	W: 26.5mm, H: 21.5mm, T: 12.0mm, P: 22.5mm, D: 0.8mm, L: 25.0mm
Model Example: 105J063D01	Capacitance: 1.0uF, Tolerance: J (5%), Voltage: 63VDC	W: 18.0mm, H: 16.0mm, T: 9.0mm, P: 15.0mm, D: 0.8mm, L: 3.8mm
Model Example: 472J630D02	Capacitance: 0.0047uF, Tolerance: J (5%), Voltage: 630VDC	W: 10.0mm, H: 9.0mm, T: 5.0mm, P: 7.5mm, D: 0.6mm, L: 3.8mm

2304140030_Jimson-MPP684K630D05_C434363.pdf

Quality MPP capacitor Jimson MPP684K630D05 with high capacitance stability and low inherent temperature rise for sale

MPP capacitor Jimson MPP684K630D05 with high capacitance stability and low inherent temperature rise Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!