Home > Film Capacitors >

epoxy coated capacitor Jimson PPS223K1000D01 suitable for large current circuits and pulse rise rate

Product Categories

Fixed Inductors [2693]
RF Filters [248]
Oscillators [540]
Crystals [2945]
Rotary Potentiometers, Rheostats [234]
Programmable Oscillators [242]
Ceramic Filters [216]
Delay Lines [5]
Aluminum Electrolytic Capacitors [2799]
Trimmer Potentiometers [1587]
Aluminum - Polymer Capacitors [1039]
Thumbwheel Potentiometers [25]
Common Mode Chokes [1562]
Chassis Mount Resistors [135]
Chip Resistor - Surface Mount [1995]
Capacitor Kits [6]
Resistor Kits [17]
Cable Ferrites [83]
EMI/RFI Filters (LC, RC Networks) [152]
Ferrite Beads and Chips [1587]
Arrays, Signal Transformers [34]
Value Display Potentiometers [4]
Resistor Networks, Arrays [593]
Through Hole Resistors [711]
Wireless Charging Coils [34]
Film Capacitors [835]
Thin Film Capacitors [914]
Ceramic Capacitors [2764]
Tantalum Capacitors [134]
Current Sense Resistors [124]
Power Line Filter Modules [49]
Resonators [79]
Capacitor Networks, Arrays [24]
Electric Double Layer Capacitors (EDLC), Supercapacitors [3]
Pin Configurable/Selectable Oscillators [13]
Silicon Capacitors [2]
Adjustable Power Resistor [64]
Specialized Resistors [144]
VCOs (Voltage Controlled Oscillators) [81]
Trimmers, Variable Capacitors [9]
Ferrite Cores [96]
Feed Through Capacitors [134]
Slide Potentiometers [123]
Motor Start, Motor Run Capacitors (AC) [29]
SAW Filters [201]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

epoxy coated capacitor Jimson PPS223K1000D01 suitable for large current circuits and pulse rise rate

Capacitance : 22nF

Operating Temperature : -40℃~+85℃

Tolerance : ±10%

Voltage Rating : 1kV

Description : 22nF Film Capacitor ±10% 1kV Through Hole P=27.5mm

Mfr. Part # : PPS223K1000D01

Model Number : PPS223K1000D01

Package : Through Hole,P=27.5mm

Contact Now

Product Overview

The JIMSON ELECTRONICS (XIAMEN) CO.,LTD. PPS Capacitor is designed for high-voltage and pulse applications. It features high stability of capacitance and dissipation factor (DF) versus temperature and frequency, a special series construction for long-term reliability under high voltage, and a high pulse rise rate (dv/dt) making it suitable for large current circuits. Key applications include high voltage and pulse circuits in color TVs, electric mosquito swatters, and igniters. The capacitors are constructed with a polypropylene film dielectric, aluminum foil electrodes, and epoxy resin coating. They are manufactured in compliance with RoHS 2.0 environmental directives.

Product Attributes

Brand: JIMSON (JS)
Origin: Xiamen, China
Dielectric: Polypropylene film
Electrodes: Aluminum foil
Coating: Epoxy resin (fire retardant on request)
Leads: Radial leads of tinned wire/insulation flexible wire
Terminal Contact: Electrically welded
Certifications: RoHS 2.0 Compliant
Color: Brown (as per dimension table)

Technical Specifications

Model	Rated Capacitance	Capacitance Tolerance	Rated Voltage	W MAX (mm)	H MAX (mm)	T MAX (mm)	P 1.0 (mm)	D 0.05 (mm)	L +5/-10 (mm)
221K1600D01	0.22nF	K (10%)	1600VDC	18.0	12.0	7.0	15.0	0.8	25.0
222K1600D01	2.2nF	K (10%)	1600VDC	18.0	13.0	8.0	15.0	0.8	25.0
222K2000D01	2.2nF	K (10%)	2000VDC	24.0	17.0	12.0	20.0	0.8	25.0
103J1600D01	10nF	J (5%)	1600VDC	24.0	13.0	10.0	20.0	0.8	25.0
562K2000D01	5.6nF	K (10%)	2000VDC	24.0	17.0	10.0	20.0	0.8	25.0
103K2000D03	10nF	K (10%)	2000VDC	32.0	19.0	14.0	27.5	0.8	25.0
223K1000D01	22nF	K (10%)	1000VDC	31.0	22.5	17.0	27.5	0.8	25.0
General Specifications:
Capacitance Range	0.22nF ~ 10nF (J 1600VDC), 2.2nF ~ 5.6nF (K 2000VDC), 22nF (K 1000VDC)
Rated Capacitance Tolerance	K = 10%, J = 5%
Rated Voltage	1000VDC, 1600VDC, 2000VDC, 2500VDC
Voltage Proof	No permanent breakdown or flashover
Dissipation Factor (DF)	0.1% (at 20, 1KHz)
Insulation Resistance (IR)	C 0.1uF: IR 30000M; C > 0.1uF: IR*C 5000S
Endurance Test Conditions	1000 hours with 125% of rated voltage at 85
Endurance Test Results	C/C 10%; DF 0.3%; IR 50% of specified value
Climatic Catalogue	40/85/21
Solderability	Solder bath: 2355, 2.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from bottom of body. Solder should cover at least 75% of the circumference of the lead.
Heat Shock Test Conditions	Solder bath: 2605, 5.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from bottom of body.
Heat Shock Test Results	C/C 5%, DF 1.2 * specified value. No visible damage to capacitor appearance.
Lead Tensile Strength	Pull: 2.2 LBS, time: 5 sec. No visible damage.
Lead Bending Strength	Load of lead: 1.1 LBS. Capacitor body bent 90 degrees and returned to original position. No visible damage.
Vibration Test	Frequency cycle: 10Hz to 55Hz and then 10Hz. Amplitude: 1.5mm in three directions. Time: 2 hours each direction (total 6 hours). No visible damage.
Reference Standard	IEC 60384-17, GB 14579
Storage Environment	Temperature 30, Humidity 70% (MBB unopened for 24 months)
Soldering Suggestion	Pre-heating: 105, 1min. Soldering: 270, 4S.

2410121458_Jimson-PPS223K1000D01_C434409.pdf

Quality epoxy coated capacitor Jimson PPS223K1000D01 suitable for large current circuits and pulse rise rate for sale

epoxy coated capacitor Jimson PPS223K1000D01 suitable for large current circuits and pulse rise rate Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!