Home > Film Capacitors >

High reliability Jimson MPC105J400D01 capacitor for DC blocking bypassing and noise suppression circuits

Product Categories

Fixed Inductors [2693]
RF Filters [248]
Oscillators [540]
Crystals [2945]
Rotary Potentiometers, Rheostats [234]
Programmable Oscillators [242]
Ceramic Filters [216]
Delay Lines [5]
Aluminum Electrolytic Capacitors [2799]
Trimmer Potentiometers [1587]
Aluminum - Polymer Capacitors [1039]
Thumbwheel Potentiometers [25]
Common Mode Chokes [1562]
Chassis Mount Resistors [135]
Chip Resistor - Surface Mount [1995]
Capacitor Kits [6]
Resistor Kits [17]
Cable Ferrites [83]
EMI/RFI Filters (LC, RC Networks) [152]
Ferrite Beads and Chips [1587]
Arrays, Signal Transformers [34]
Value Display Potentiometers [4]
Resistor Networks, Arrays [593]
Through Hole Resistors [711]
Wireless Charging Coils [34]
Film Capacitors [835]
Thin Film Capacitors [914]
Ceramic Capacitors [2764]
Tantalum Capacitors [134]
Current Sense Resistors [124]
Power Line Filter Modules [49]
Resonators [79]
Capacitor Networks, Arrays [24]
Electric Double Layer Capacitors (EDLC), Supercapacitors [3]
Pin Configurable/Selectable Oscillators [13]
Silicon Capacitors [2]
Adjustable Power Resistor [64]
Specialized Resistors [144]
VCOs (Voltage Controlled Oscillators) [81]
Trimmers, Variable Capacitors [9]
Ferrite Cores [96]
Feed Through Capacitors [134]
Slide Potentiometers [123]
Motor Start, Motor Run Capacitors (AC) [29]
SAW Filters [201]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

High reliability Jimson MPC105J400D01 capacitor for DC blocking bypassing and noise suppression circuits

Capacitance : 1uF

Tolerance : ±5%

Voltage Rating : 400V

Description : 1uF Film Capacitor ±5% 400V Through Hole P=15mm

Mfr. Part # : MPC105J400D01

Model Number : MPC105J400D01

Package : Through Hole,P=15mm

Contact Now

Product Overview

The JIMSON (JS) MPC Series Capacitor is a non-inductive, self-healing capacitor designed for reliable performance in various electronic applications. Featuring a polypropylene film dielectric and vacuum-evaporated metal electrodes, it offers high moisture resistance and excellent physical and environmental characteristics. This capacitor is ideal for filtering, noise suppression, pulse, logic, and timing circuits, as well as DC-blocking, by-passing, and signal coupling in communication equipment.

Product Attributes

Brand: JIMSON (JS)
Origin: Xiamen, China
Product Type: Capacitor
Series: MPC
Construction: Non-inductive, self-healing
Dielectric: Polypropylene film
Electrodes: Vacuum evaporated metal
Encapsulation: Reinforced flame retardant plastic case, sealed with epoxy resin (UL94V-0)
Leads: Radial leads of tinned wire/insulation flexible wire
Terminal Contact: Electrically welded
Marking Method: UV ink or laser engraving
Certifications: RoHS Compliant (RoHS 2.0)

Technical Specifications

Specification	Description	Test Conditions
Rated Capacitance	1.0uF	Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms max.
Capacitance Tolerance	J = 5%
Rated Voltage	400VDC
Voltage Proof	No permanent breakdown or arcing	1.6*400V (1 minute at 20)
Dissipation Factor (DF)	0.1%	at 20, 1kHz; Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms max.
Insulation Resistance (IR)	C 0.33uF: IR 30000M C > 0.33uF: IR*C 5000S	measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65%
Endurance	C/C 5%; DF 0.40%; IR 50% of the specified value	1000 hours with 125% of rated voltage at 85. After the test.
Climatic Catalogue	40/100/21
Solderability	Solder should cover at least 75% of the circumference of the lead	Solder bath: 2355, bath time: 2.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body
Heat Shock	C/C 5%, DF 1.2*specified value. Capacitor appearance should be free from visible damage after test.	Solder bath: 2605, bath time: 5.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body
Lead Tensile Strength	No visible damage to leads	Pull: 2.2 LBS, Time: 5 sec
Lead Bending Strength	No visible damage to leads	Load of lead: 1.1 LBS, The body of capacitor is bent 90 degrees and returned to its original position
Vibration	No visible damage to appearance	Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours)
Reference Standard	IEC 384-16, GB10190
Dimensions (Model: 105J400V)	W: 18.0 0.5 mm, H: 18.0 0.5 mm, T: 10.0 0.5 mm, P: 15.0 1.0 mm, D: 0.8 0.05 mm, L: +5/-10 mm
Color (Model: 105J400V)	Yellow

Applications

Filter and noise suppression circuits
Pulse, logic, and timing circuits
DC-blocking, by-passing, and signal coupling in general communication equipment

Marking

On Capacitor: Rated capacitance (e.g., 105), Rated voltage (e.g., 400VDC), Capacitance tolerance (e.g., J), Manufacturer's symbol (JIMSON (JS)).
On Package: Product model, rated capacitance and voltage, date of manufacture, location of manufacture, and manufacturer's name.

Storage Conditions

Environment: Temperature 30, Humidity 70%. MBB (Moisture Barrier Bag) not opened ensures 24 months of storage.
Conditions: Avoid exposure to hydrogen chloride, hydrogen sulfide, sulfuric acid, high temperature, and high humidity. Store in air.

2410121646_Jimson-MPC105J400D01_C434278.pdf

Quality High reliability Jimson MPC105J400D01 capacitor for DC blocking bypassing and noise suppression circuits for sale

High reliability Jimson MPC105J400D01 capacitor for DC blocking bypassing and noise suppression circuits Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!