Epoxy encapsulated non inductive wound capacitor DGCX MPP684J2GA080C3F0ZR for dc ac and pulse circuits

Product Overview

The CBB22/MPP series metallized polypropylene film capacitor is an epoxy-encapsulated, non-inductive wound type capacitor. It features a self-healing capability due to its metallized polypropylene film construction, low loss, and minimal internal temperature rise. The capacitor is encapsulated with flame-retardant epoxy resin powder and utilizes tinned copper wire or tinned copper-clad steel wire for connections. This series is widely used in various electronic equipment for DC blocking, coupling, decoupling, filtering, bypassing, and other high-frequency, DC, AC, and pulse circuits.

Product Attributes

• Brand: DGCX (Company Trademark)
• Product Type: CBB22/MPP Series Metallized Polypropylene Film Capacitors (Impregnated Type)
• Origin: Dongguan, Guangdong, China
• Encapsulation: Flame-retardant epoxy resin powder
• Lead Material: Tinned copper-clad steel wire
• Internal Construction: Non-inductive wound structure
• Environmental Compliance: RoHS, REACH, Halogen-free (if required)

Technical Specifications

General Electrical Characteristics

• Climate Category: 40/105/21
• Operating Temperature Range: -40C to +105C (Derating applied above 85C)
• Rated Temperature: 85C
• Capacitance Range: 0.001F to 6.8F
• Capacitance Tolerance: 5% (J), 10% (K)
• Rated Voltages: 100Vdc, 160Vdc, 250Vdc, 400Vdc, 630Vdc, 1000Vdc, 1250Vdc, 1600Vdc, 2000Vdc
• Dielectric Strength: 1.6 x UR(VDC) for 5 seconds
• Insulation Resistance: 30,000M (for C0.33uF, 100VDC, 60s); 10000M*uF (for C>0.33uF, 100VDC, 60s)

Maximum Rate of Rise of Voltage (dV/dt)

Values depend on rated voltage (UR) and lead pitch (P). Refer to the technical documentation for specific charts.

Product Structure and Main Materials

Packaging Information

• Inner Box Dimensions: 34.5cm x 23.5cm x 24.5cm (L x W x H)
• Outer Box Dimensions: 49cm x 36cm x 27cm (L x W x H)
• Packaging includes manufacturer part number, quantity per bag, and Lot No.
• Capacitors are packaged in transparent PVC bags for moisture and dust protection.
• RoHS environmental mark is applied.

Storage Conditions

• Temperature: Max 35C
• Relative Humidity: Max 80%
• Storage Duration: Maximum 12 months from the production date marked on the packaging.
• Avoid prolonged exposure to air which can degrade lead solderability.
• Do not store in high temperature or high humidity environments.

Usage Rules

• Operating Range: Do not exceed the upper category temperature; avoid overload; do not exceed maximum pulse current.
• Handling: Avoid repeated squeezing at the lead root; be cautious of lead tips.
• Soldering:
• Wave Soldering: Preheating section max temperature Ts 120C for 45 seconds; peak temperature TP 110C for 120 seconds. For P7.5mm, T4mm, soldering time < 4 seconds.
• Soldering Iron: Tip temperature not exceeding 350C, time not exceeding 3 seconds.
• Lead film capacitors are not suitable for reflow soldering.

Epoxy encapsulated non inductive wound capacitor DGCX MPP684J2GA080C3F0ZR for dc ac and pulse circuits Images