Home > Film Capacitors >

Low loss capacitor DGCX PPS682J3FA060C3F0ZR with impregnated type construction and high overcurrent capability

Product Categories

Fixed Inductors [2693]
RF Filters [248]
Oscillators [540]
Crystals [2945]
Rotary Potentiometers, Rheostats [234]
Programmable Oscillators [242]
Ceramic Filters [216]
Delay Lines [5]
Aluminum Electrolytic Capacitors [2799]
Trimmer Potentiometers [1587]
Aluminum - Polymer Capacitors [1039]
Thumbwheel Potentiometers [25]
Common Mode Chokes [1562]
Chassis Mount Resistors [135]
Chip Resistor - Surface Mount [1995]
Capacitor Kits [6]
Resistor Kits [17]
Cable Ferrites [83]
EMI/RFI Filters (LC, RC Networks) [152]
Ferrite Beads and Chips [1587]
Arrays, Signal Transformers [34]
Value Display Potentiometers [4]
Resistor Networks, Arrays [593]
Through Hole Resistors [711]
Wireless Charging Coils [34]
Film Capacitors [835]
Thin Film Capacitors [914]
Ceramic Capacitors [2764]
Tantalum Capacitors [134]
Current Sense Resistors [124]
Power Line Filter Modules [49]
Resonators [79]
Capacitor Networks, Arrays [24]
Electric Double Layer Capacitors (EDLC), Supercapacitors [3]
Pin Configurable/Selectable Oscillators [13]
Silicon Capacitors [2]
Adjustable Power Resistor [64]
Specialized Resistors [144]
VCOs (Voltage Controlled Oscillators) [81]
Trimmers, Variable Capacitors [9]
Ferrite Cores [96]
Feed Through Capacitors [134]
Slide Potentiometers [123]
Motor Start, Motor Run Capacitors (AC) [29]
SAW Filters [201]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Low loss capacitor DGCX PPS682J3FA060C3F0ZR with impregnated type construction and high overcurrent capability

Description : Through Hole,P=20mm Film Capacitors RoHS

Mfr. Part # : PPS682J3FA060C3F0ZR

Model Number : PPS682J3FA060C3F0ZR

Package : Through Hole,P=20mm

Contact Now

Product Overview

The CBB81/PPS series high-voltage metallized polypropylene film/foil capacitors (impregnated type) are designed for high-voltage and high-frequency pulse circuits. Featuring a metallized polypropylene film and aluminum foil composite with an internal series non-inductive structure, these capacitors offer low loss, low internal temperature rise, and high dv/dt and overcurrent capabilities. They are widely used in applications such as TV and display deflection circuits (S-correction and line flyback waveforms), electronic ballasts, energy-saving lamps, surge absorbers, and SCR rectifier circuits.

Product Attributes

Brand: DGCX ()
Origin: Dongguan, Guangdong Province, China
Product Series: CBB81/PPS
Construction: Metallized polypropylene film & aluminum foil composite, internal series non-inductive structure, impregnated type.
Encapsulation: Flame-retardant epoxy resin powder coating.
Lead Material: Tinned copper wire or tinned copper-clad steel wire.
Environmental Compliance: RoHS, REACH, Halogen-free (if required).

Technical Specifications

Model/Part Number	Capacitance (uF)	Tolerance (%)	Rated Voltage (V DC)	Dissipation Factor (DF) (1KHz)	Dimensions (mm) (L x W x T)	Pitch (P) (mm)	Lead Diameter (d) (mm)
PPS682J3FA060C3F0ZR	0.0068	5%	3000	0.1%	22.0 x 13.5 x 6.2	20.0	0.8

General Electrical Characteristics

Parameter	Specification	Test Method
Climate Category	40/105/21	-
Operating Temperature Range	-40 to +105 (+85 to +105: Derating factor 1.5% per for R.V(dc))	-
Capacitance Range	0.00022~0.047uF	-
Capacitance Tolerance	3%(H); 5%(J); 10%(K)	-
Rated Voltage (V DC)	630V, 1000V, 1200/1250V, 1600V, 2000V	-
Dissipation Factor (DF)	0.1% (1KHz), 0.2% (10KHz), at 20~25	-
Insulation Resistance	50000M for C0.33uF; 15000MuF for C>0.33uF	Measured at 100VDC10VDC/60s / 20~25
Withstand Voltage (Terminal to Terminal)	1.75UR(VDC), 5 seconds	-

Product Structure and Main Materials

No.	Main Material	Description	Remarks
1	Metallized Polypropylene Film/Aluminum Foil/Polypropylene Film	MPPAT/AL/OPP	-
2	Spray Welding Layer	Zinc-tin alloy wire	-
3	Lead Wire	Tinned copper-clad steel wire	-
4	Outer Encapsulation Material	Epoxy resin powder	Flame-retardant UL94V-0
5	Inner Coating Material	Epoxy resin	-

Packaging Information

Item	Description
Inner Carton Dimensions (LWH)	34.523.524.5 cm
Outer Carton Dimensions (LWH)	493627 cm
Carton Contents	Manufacturer's part number, quantity per bag, Lot No.
Packaging Bag	Transparent PVC bag for moisture and dust protection.
Labeling	RoHS environmental mark, other customer-specified markings.

Storage Conditions

Parameter	Condition
Temperature	Max 35
Relative Humidity	Max 80%
Storage Duration	Maximum 12 months (based on production date marked on the packaging bag).

Environmental Characteristics

Complies with RoHS requirements.
Complies with REACH requirements.
Complies with Halogen-free requirements (if specified).

Usage Rules

Operating Range: Do not exceed the upper category temperature limit; avoid overload operation; do not exceed maximum pulse current.
Handling Precautions: Avoid repeated squeezing at the lead wire root; pay attention to the lead wire tip.
Soldering: Confirm solder temperature within the specified range (e.g., Wave soldering: TP 110 for 120s; Ts 120 for 45s. For leads P7.5mm, T4mm, wave soldering time < 4s. Iron soldering: tip temperature 350, time 3s). Not suitable for reflow soldering.

2512091725_DGCX-PPS682J3FA060C3F0ZR_C53133399.pdf

Quality Low loss capacitor DGCX PPS682J3FA060C3F0ZR with impregnated type construction and high overcurrent capability for sale

Low loss capacitor DGCX PPS682J3FA060C3F0ZR with impregnated type construction and high overcurrent capability Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!