| Rated Capacitance | 0.0047~0.22uF | Measuring frequency: 1kHz, Measuring voltage: 1V |
| Capacitance Tolerance | J=5%, K=10% | |
| Rated Voltage | 1000~2000VDC | |
| Voltage Proof | 1.6*UR Unit:VDC (1 minute at 20) | No permanent breakdown and arcing |
| Dissipation Factor (DF) | 0.1% | (at 20, 1kHz), Measuring frequency: 1kHz, Measuring voltage: 1V |
| Insulation Resistance (IR) | C0.33uF: IR30000M
C0.33uF: IR*C5000S | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Endurance | C/C5%; DF0.40%; IR50% of the specified value | 1000 hours with 125% of rated voltage at 85. After the test |
| Climatic Catalogue | 40/85/21 | |
| Solder Ability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body |
| Heat Shock | C/C5%, DF1.2* | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body. Capacitor appearance should be free from visible damage after the test. |
| Lead Tensile Strength | Appearance without damage | Pull: 2.2 LBS, Time: 5 sec |
| Lead Bending Strength | Lead without damage | Load of lead: 1.1 LBS. The body of capacitor is bent 90 degrees and returned to its original position. |
| Vibration | Appearance without visible damage | Frequency cycle: from 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction with a total of 6 hours. |
| Reference Standard | IEC 384-16, GB10190 | |
| Marking on Capacitor | Rated capacitance (e.g., 472~224), Rated voltage (e.g., 1000~2000VDC), Capacitance tolerance (e.g., J/K), Manufacturer's symbol (JIMSON/JS) | UV ink or laser engraving |
| Marking on Package | Type, rating, quantity, date of manufacture, location of manufacture, manufacturer's name | |
| Capacitance Unit Conversion | 1F=1,000mF=1,000,000uF=1,000,000,000nF=1,000,000,000,000pF | |
| Tolerance Symbols | F=1%, G=2%, J=5%, K=10%, M=20%, N=30% | |
| Dissipation Factor Standard Conditions | 20, 1kHz | |
| Insulation Resistance Test Conditions | T=20, RH65% | |
| High Temperature Test | Capacitance drift: +5% max of initial value; DF: < 0.2% (at 1KHz) | +85 |
| Low Temperature Test | Capacitance drift: -5% max of initial value; DF: < 0.15% (at 1KHz) | -40 |
| Humidity Test | Capacitance drift: +10% max of initial value; DF: < 0.2% (at 1KHz); Insulation resistance: > 50% of initial value | 853, 853% RH for 10001% hours, followed by 16 hours at room conditions |
| Model Example 1 | MPC104J1000D01 | 0.1uF, Yellow, W: 26.5mm, H: 18.5mm, T: 10.0mm, P: 22.5mm, D: 0.8mm, L: 21.0mm |
| Model Example 2 | MPC224K1000D03 | 0.22uF, Yellow, W: 32.0mm, H: 22.0mm, T: 13.0mm, P: 27.5mm, D: 0.8mm, L: 21.0mm |
| Soldering Suggestion (Max Temp) | 270 | 4 sec |
| Soldering Suggestion (Pre-heating) | 105 | 1 min |
| Storage Environment | Temperature 30, Humidity 70% | MBB (Moisture Barrier Bag) not open ensures 24 months storage period. |
| Storage Condition Note | Avoid exposure to atmosphere containing hydrogen chloride, hydrogen sulfide, sulfuric acid. Avoid high temperature and high humidity. | |
