| Rated Capacitance | 0.0022uF ~ 1.0uF | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms max. |
| Capacitance Tolerance | J = 5%, K = 10% | |
| Rated Voltage | 630VDC, 63VDC | |
| Voltage Proof | No permanent breakdown or arcing | 1.6*UR, Unit: VDC (5s at 20) |
| Dissipation Factor (DF) | 0.1% | at 20, 1kHz, Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms max. |
| Insulation Resistance (IR) | C 0.33uF: 30000 M
C > 0.33uF: IR*C 5000 S | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Endurance | C/C 5%; DF 0.4%; IR 50% of specified value | 1000 hours with 125% of rated voltage at 85. |
| Climatic Catalogue | 40/85/21 | |
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body |
| Heat Shock | C/C 5%, DF 1.2*specified value. Capacitor appearance should be free from visible damage after test. | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body |
| Lead Tensile Strength | Appearance without damage | Pull: 2.2 LBS, Time: 5 sec |
| Lead Bending Strength | Appearance without damage | Load of lead: 1.1 LBS (The body of capacitor is bent 90 degrees and returned to its original position) |
| Vibration | Appearance without visible damage | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) |
| Reference Standard | IEC 60384-16, GB10190 | |
| Marking | Rated capacitance, Rated voltage, Capacitance tolerance, Manufacturer's symbol (JIMSON (JS)) | Printing method: UV ink or laser engraving |
| Package Marking | Product model, rated capacitance and voltage, production date and factory address, manufacturer's name | |
| Soldering Suggestion (Max Temp) | Pre-heating: 105 (1min), Soldering: 270 (4s) | |
| Storage Environment | Temperature 30, Humidity 70% (MBB not open) | 24 months storage period |
| Storage Condition | Avoid exposure to hydrogen chloride, hydrogen sulfide, sulfuric acid, high temperature, and high humidity. | Store under 12 of the storage environment conditions. |
