| Rated Capacitance | 0.001uF, 0.01uF | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms max. |
| Capacitance Tolerance | J = 5%, K = 10% | |
| Rated Voltage | 2000VDC | |
| Voltage Proof | No permanent breakdown or arcing | 1 minute at 20 |
| Dissipation Factor (DF) | 0.1% | at 20, 1kHz; Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms max. |
| Insulation Resistance (IR) | C 0.33uF: IR 30000M
C > 0.33uF: IR*C 5000S | measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Endurance | C/C 5%; DF 0.40%; IR 50% of the specified value | 1000 hours with 125% of rated voltage at 85. After the test. |
| Climatic Catalogue | 40/85/21 | |
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body |
| Heat Shock (Soldering Heat) | C/C 5%, DF 1.2*specified value. No visible damage to capacitor appearance after test. | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body |
| Lead Tensile Strength | No visible damage to appearance. | Pull: 2.2 LBS, Time: 5 sec |
| Lead Bending Strength | No visible damage to appearance. | Load of lead: 1.1 LBS. The body of capacitor is bent 90 degrees and returned to its original position. |
| Vibration | No visible damage to appearance. | Frequency cycle: from 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction with a total of 6 hours. |
| Reference Standard | IEC 384-16, GB10190 | |
| Model Number | 102J2000D02 | 0.001uF, J (5%), 2000VDC |
| Model Number | 103K2000D02 | 0.01uF, K (10%), 2000VDC |
| Dimensions (mm) | W 0.5, H 0.5, T 0.5, P 1.0, D 0.05, L +5/-10 | |
| Dimensions (for 102J2000D02) | W: 18.0, H: 10.0, T: 5.0, P: 15.0, D: 0.8, L: 25.0 | Color: Yellow |
| Dimensions (for 103K2000D02) | W: 26.5, H: 17.0, T: 10.0, P: 22.5, D: 0.8, L: 25.0 | Color: Yellow |
| Soldering Suggestion (Max Temp) | 270 | Time: 4S (Pre-heating: 105, 1min) |
| Storage Environment | Temperature 30, Humidity 70% (in MBB) | 24 months storage period if MBB is not opened. |
| Storage Condition | Avoid exposure to hydrogen chloride, hydrogen sulfide, sulfuric acid, high temperature and high humidity. | Store under specified storage environment. |
