| Rated Capacitance | 0.0022F ~ 0.47F | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms max. |
| Capacitance Tolerance | J = 5%, K = 10% | |
| Rated Voltage | 630VDC, 630VAC | |
| Voltage Proof | 1.6*UR (VDC) (1 minute at 20) | No permanent breakdown or arcing |
| Dissipation Factor (tan) | 0.1% | (at 20, 1kHz), Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms max. |
| Insulation Resistance | C 0.33F: IR 30000M
C > 0.33F: IR*C 5000S | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Endurance | C/C 5%; DF 0.40%; IR 50% of the specified value | 1000 hours with 125% of rated voltage at 85. After the test. |
| Climatic Catalogue | 40/85/21 | |
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body |
| Heat Shock (Soldering Heat) | C/C 5%, DF 1.2*specified value. Appearance without visible damage. | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body |
| Lead Tensile Strength | Appearance without damage | Pull: 2.2 LBS, Time: 5 sec |
| Lead Bending Strength | Appearance without damage | Load of lead: 1.1 LBS, The body of capacitor is bent 90 degrees and returned to its original position |
| Vibration | Appearance without visible damage | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) |
| Reference Standard | IEC 384-16, GB10190 | |
| Model Example | 272K630D01 | 0.0027F, K=10%, 630VDC |
| Dimensions (mm) | W 0.5, H 0.5, T 0.5, P 1.0, D 0.05, L +5/-10 | Refer to dimension table for specific models |
| Storage Temperature | 30 | Humidity 70% |
| Storage Period | 24 months | MBB (Moisture Barrier Bag) not opened |
