| Rated Capacitance | 0.015uF, 0.1uF, 0.15uF | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms max. |
| Capacitance Tolerance | J=5%, K=10% | |
| Rated Voltage | 1200VDC, 1600VDC | |
| Voltage Proof | No permanent breakdown or flashover | 1.6*UR (1 minute at 20) |
| Dissipation Factor (tan) | 0.1% | (at 20, 1KHz), Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms max. |
| Insulation Resistance (IR) | C0.33uF: IR30000M
C0.33uF: IR*C5000S | Measured at rated voltage or less than 100VDC (1 minute at 20 and RH65%) |
| Endurance | C/C5%; DF0.40%; IR50% of the specified value | 1000 hours with 125% of rated voltage at 85 |
| Climatic Catalogue | 40/85/21 | |
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body |
| Heat Shock | C/C5% DF1.2* Appearance should be free from visible damage. | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body |
| Lead Tensile Strength | No damage to leads | Pull: 2.2 LBS, Time: 5 sec |
| Lead Bending Strength | No damage to leads | Load of lead: 1.1 LBS (The body of capacitor is bent 90 degrees and returned to its original position) |
| Vibration | No visible damage to appearance | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) |
| Reference Standard | IEC 384-16, GB10190 |
| Model Example | 153K1600D01 | 0.015uF, K Tolerance, 1600VDC |
| 104K1600D02 | 0.1uF, K Tolerance, 1600VDC |
| 104J1200VDC | 0.1uF, J Tolerance, 1200VDC |
| Dimensions (mm) | W 0.5, H 0.5, T 0.5, P 1.0, D 0.05, L +5/-10 | |
| Dimensions (mm) for 153K1600D01 | W: 26.5, H: 17.0, T: 8.5, P: 22.5, D: 0.8, L: 25.0 | Color: Yellow |
| Dimensions (mm) for 104K1600D02 | W: 32.0, H: 20.0, T: 11.0, P: 27.5, D: 0.8, L: 25.0 | Color: Yellow |
| Dimensions (mm) for 104J1200VDC | W: 18.0, H: 18.0, T: 10.0, P: 15.0, D: 0.8, L: 25.0 | Color: Yellow |
| Soldering Suggestion | Max Soldering Temperature: 270, Time: 4S, Pre-heating: 105, 1min | |
| Storage Environment | Temperature 30, Humidity 70% (in MBB) | Guarantees 24 months storage period if MBB is not opened. |
| Storage Conditions | Avoid exposure to hydrogen chloride, hydrogen sulfide, sulfuric acid, high temperature, and high humidity. Store in air with proper environmental conditions. |
