| Standard Capacity | 0.001F ~ 20F |
| Capacity Error Grade | 5% (J), 10% (K) |
| Climatic Category | 40/105/21 |
| Operating Temperature Range | -40 ~ 105 (Note: For each 1 increase above 85, rated operating voltage decreases by 1.25%) |
| Rated DC Voltage | 160V, 250V, 400V, 630V, 1000V, 1600V, 2000V |
| Continuous AC Voltage | 90V, 160V, 220V, 250V, 400V, 600V, 700V |
| Voltage Proof | UN x 1.6 (DC), 5s |
| Dissipation Factor | 10 x 10 at 1kHz, (1Vrms Max. at 20) |
| Insulation Resistance (IR) | CR 0.33F, IR 15000M; CR > 0.33F, IR x CR 5000s |
| Insulation Resistance Test Voltage | UN <500v: 100vdc; un>500V: 500VDC |
| Lead Strength (Tensile) | D0.8mm: 10N10% (101sec); D1.0mm: 20N10% (101sec) |
| Lead Strength (Bending) | D0.8mm: 5N10% (490); D1.0mm: 10N10% (490) |
| Resistance to Soldering Heat | Soldering temp: 2605, Time: 50.5sec. No visible damage, capacity change 5%. |
| Solderability | Soldering temp: 2355, Time: 20.5sec. |
| Rapid Temperature Change | -40 to 85, 5 cycles, 30 min each. |
| Climate Category Test (Damp Heat, Cyclic) | -40 to 85, 5 cycles. Performance requirements: no visible damage, capacity change 5%, insulation resistance 50% of applicable value, DF change 0.005. |
| Damp Heat, Steady State Test | 402, 933% RH, 21 days. Performance requirements: no visible damage, capacity change 5%, insulation resistance 50% of applicable value, DF change 0.004. |
| Durability Test | 125% UN, 85, 1000Hrs. Performance requirements: no visible damage, capacity change 5%, insulation resistance 50% of applicable value, DF 0.005. |
| Charging and Discharging Test | Rated DC voltage, 10000 cycles (0.5 sec/cycle). Performance requirements: no visible damage, capacity change 5%, insulation resistance 50% of applicable value, DF 0.005. |
| Storage Conditions | Clean, ventilated, dry warehouse. Avoid heat sources, direct sunlight, chemical reagents, acids, and harmful gases. Temperature: 5~35, Relative Humidity: 75%. Storage duration: 1 year. |
