| Product Name | Metallized Polyester Film Capacitor (Small Box Type) |
| Product Structure | 1. Metallized Polyester Film, 2. Metal Spray Layer, 3. Lead Wire, 4. Flame-retardant Epoxy Resin, 5. Flame-retardant Plastic Case |
| Climatic Category | 55/105/21 |
| Rated Temperature | 85 |
| Operating Temperature Range | -55 to +105 (+85 to 105: decreasing factor 1.25% per for VR(dc)) |
| Capacitance Range | 0.001F to 1.0F (20, 1KHz) |
| Capacitance Tolerance | 5% (J); 10% (K) |
| Withstand Voltage | 1.4UR (5s) |
| Voltage Rise Rate | 100V/s, Cut-off Current: 5mA |
| Dissipation Factor (tan) | 1.0% (20, 1KHz) |
| Insulation Resistance | UR100V: 15000M (CR0.33F); 5000S (CR>0.33F) (20, 10V, 1min) |
| Insulation Resistance | UR>100V: 15000M (CR0.33F); 5000S (CR>0.33F) (20, 100V, 1min) |
| Lead Strength (Tensile) | 0.3d0.5: 5N; 0.5d0.8: 10N; 0.8d1.25: 20N (Duration: 101 sec) |
| Lead Strength (Bending) | 0.3d0.5: 2.5N; 0.5d0.8: 5N; 0.8d1.25: 10N (101 sec, two bends in each direction) |
| Solderability (IEC 68-2-20) | Solder Bath Temp: 2355, Immersion Time: 2.0s0.5s |
| Resistance to Soldering Heat (IEC 68-2-20) | Solder Bath Temp: 2605, Immersion Time: 10s1s (Immersion depth 2+0/-0.5mm from mounting surface, with 1.5mm0.5mm insulating shield) |
| Capacitance Change (Soldering Heat) | C/C : 2% |
| Dissipation Change (Soldering Heat) | tan : 0.3% at 1 KHZ |
| Rapid Change of Temperature (IEC 68-2-14) | Temp: -55 to +105, Duration: 30min, Cycles: 5. Capacitance Change: 5%, Dissipation Change: 0.3% at 1 KHZ, Insulation Resistance: 50% of initial |
| Vibration (IEC 68-2-6) | Freq: 10-500Hz, Duration: 6 hours (2 hrs/direction), Amplitude: 0.75mm or Acceleration: 98m/s |
| Impact (IEC 68-2-29) | Impacts: 4000, Acceleration: 390m/s, Pulse Duration: 6ms |
| Dry Heat (IEC 68-2-2) | Temp: +105, Duration: 16 hours. Capacitance Change: 5%, Dissipation Change: 0.3% at 1 KHZ, Insulation Resistance: 50% of initial |
| Cold (IEC 68-2-1) | Temp: -55, Duration: 2 hours |
| Low Pressure (IEC 68-2-13) | Temp: 1535, Pressure: 8.5KPa, Duration: 1 hour (Rated voltage applied during the last 1 minute) |
| Cyclic Damp Heat (IEC 68-2-30) | Test Db, Severity b. Rated voltage applied for 1 minute after test completion. |
| Damp Heat (IEC 68-2-3) | Temp: 402, Humidity: 93 +2/-3 %, Duration: 21 days. Capacitance Change: 5%, Dissipation Change: 0.5% at 1 KHZ, Insulation Resistance: 50% of initial |
| Product Dimensions (Example: W242A562JD2TAAA4JA) | CAP: 0.0056uF, R.V: 100V, W: 7.2mm, H: 6.5mm, T: 2.5mm, P: 5.0mm, S: 0.5mm, d: 1mm, L0: 7.2mm |
| Product Code Rule | 18 digits: Model Code, Rated Voltage, Nominal Capacitance, Capacitance Tolerance, Lead Pitch/Axial Product Length, Product Lead, Packaging Method and Lead Forming Code/Terminal Code, Internal Feature Code |
| Example Product Code Breakdown (W242A562JD2TAAA4JA) | W24 (CL23B Series), 2 (100V), 562 (5.6nF), J (5%), D (5.0mm Pitch), 2 (CU 0.8 Lead), T (Taped Packaging), AAAAJA (Internal Code) |
