| Product Name | Metalized Polypropylene Film Capacitor | | |
| Reference Standard | GB/T10190 (IEC 60384-16) | | |
| Climate Category | 40/105/21 | | |
| Rated Temperature | 85 | | |
| Operating Temperature Range | -40 to 105 | | (+85 to 105: decreasing factor 1.25% per for VR(dc)) |
| Rated Voltage | 100, 160, 200, 250, 400/450, 630 | VDC | |
| Capacitance Range | 0.01 to 10.0 | F | (20, 1KHz) |
| Capacitance Tolerance | 5 (J), 10 (K) | % | |
| Withstand Voltage | 600 | VDC | (5s) |
| Voltage Rise Rate | 100 | V/S | |
| Cut-off Current | 5 | mA | |
| Dissipation Factor (tan ) | 0.1 | % | (20, 1KHz) |
| Insulation Resistance | 50000 | M | CR0.33F (20, 100V, 1min) |
| Insulation Resistance | 15000 | S | CR0.33F (20, 100V, 1min) |
| Lead Strength (Tensile Force) | 0.3d0.5: 5N; 0.5d0.8: 10N; 0.8d1.25: 20N | N | (d=lead diameter, duration 101s) |
| Lead Strength (Bending Load) | 0.3d0.5: 2.5N; 0.5d0.8: 5N; 0.8d1.25: 10N | N | (d=lead diameter, two bends in each direction) |
| Solderability | 2355, 2.00.5s | | (IEC 68-2-20) |
| Withstand Soldering Heat | 2605, 101s | | (IEC 68-2-20) |
| Capacitance Change (Soldering Heat) | 3 | % | |
| Dissipation Change (Soldering Heat) | 0.2 | % | at 1 KHz |
| Rapid Temperature Change | -40 to +105, 5 cycles | | (IEC 68-2-14) |
| Capacitance Change (Temp. Change) | 3 | % | |
| Dissipation Change (Temp. Change) | 0.2 | % | at 1 KHz |
| Insulation Resistance (Temp. Change) | 50% of initial | | |
| Vibration | 10-500Hz, 0.75mm or 98m/s | | (IEC 68-2-6, 3 directions, 2h each) |
| Impact | 4000 cycles, 390m/s, 6ms | | (IEC 68-2-29) |
| Dry Heat | +105, 16 hours | | (IEC 68-2-2) |
| Capacitance Change (Dry Heat) | 5 | % | |
| Dissipation Change (Dry Heat) | 0.2 | % | at 1 KHz |
| Insulation Resistance (Dry Heat) | 50% of initial | | |
| Cold Test | -40, 2 hours | | (IEC 68-2-1) |
| Low Pressure Test | 8.5KPa, 1 hour | | (IEC 68-2-13) |
| Cyclic Damp Heat | 402, 93+2/-3 %, 21 days | | (IEC 68-2-3) |
| Capacitance Change (Damp Heat) | 5 | % | |
| Dissipation Change (Damp Heat) | 0.2 | % | at 1 KHz |
| Insulation Resistance (Damp Heat) | 50% of initial | | |
| Product Dimensions (Example: W372S154KJ6L0090EC) | L0=10.0, W=10.5, H=6.0, T=7.5, P=7.5 | mm | (P: Lead Pitch) |
| Product Code Rule - Model Code | W37 | | (Corresponds to CBB21) |
| Product Code Rule - Rated Voltage | 2S | | (Corresponds to 450V) |
| Product Code Rule - Capacitance | 154 | | (Corresponds to 0.15F) |
| Product Code Rule - Tolerance | K | | (Corresponds to 10%) |
| Product Code Rule - Lead Pitch | J | | (Corresponds to 7.5mm) |
| Product Code Rule - Lead/Axial Length | 6 | | (Corresponds to CP 0.6 lead) |
| Product Code Rule - Packaging/Forming | L | | (Corresponds to Straight leads, cut, L20MM) |
| Product Code Rule - Internal Feature Code | 0090EC | | |
