| Product Name | Metalized Polypropylene Film Capacitor |
| Reference Standard | GB/T10190 (IEC 60384-16) |
| Structure | 1. Metalized Polypropylene Film, 2. Metallized Layer, 3. Lead Wire, 4. Inner Encapsulation Epoxy Resin, 5. Outer Encapsulation Flame Retardant Epoxy Resin (UL94V-0) |
| Climatic Category | 40/105/21 |
| Rated Temperature | 85 |
| Operating Temperature Range | -40 to 105 |
| Rated Voltage | 100V, 160V, 200V, 250V, 400V/450V, 630V |
| Capacitance Range | 0.01F ~ 10.0F (at 20, 1KHz) |
| Capacitance Tolerance | 5% (J); 10% (K) |
| Withstand Voltage | 1.6UR (5s) |
| Voltage Rate of Rise | 100V/S; Cut-off Current: 5mA |
| Dissipation Factor (tan ) | 0.1% (at 20, 1KHz) |
| Insulation Resistance | 50000M (CR0.33F); 15000S (CR0.33F) (at 20, 100V, 1min) |
| Lead Strength (Tensile Force) | 0.3d0.5: 5N; 0.5d0.8: 10N; 0.8d1.25: 20N |
| Lead Strength (Bending) | 0.3d0.5: 2.5N; 0.5d0.8: 5N; 0.8d1.25: 10N (Load, 2 bends in each direction) |
| Solderability | 2355, 2.0s0.5s |
| Resistance to Soldering Heat | 2605, 10s1s; C/C: 3%; tan : 0.2% at 1 KHZ |
| Rapid Change of Temperature | -40 to +105, 5 cycles; C/C: 3%; tan : 0.2% at 1 KHZ; Insulation Resistance: 50% of initial |
| Vibration | 10~500Hz, 0.75mm or 98m/s; 6 hours total |
| Impact | 4000 times, 390m/s, 6ms pulse duration |
| Dry Heat | +105, 16 hours; C/C: 5%; tan : 0.2% at 1 KHZ; Insulation Resistance: 50% of initial |
| Cold | -40, 2 hours |
| Low Air Pressure | 8.5KPa, 1 hour (Rated voltage applied during the last minute) |
| Cyclic Damp Heat | According to IEC 68-2-30, Db, severity b |
| Stable Damp Heat | 402, 93+2/-3 %, 21 days; C/C: 5%; tan : 0.2% at 1 KHZ; Insulation Resistance: 50% of initial |
| Product Dimensions (Example: W372S104JK6TEGC0FC) | CAP: 0.1uF, R.V: 450V, W max: 12.5mm, H max: 9.0mm, T max: 5.5mm, P: 10.0mm 0.5mm, S: 0.6mm 0.5mm, d: 1mm 0.5mm |
| Product Coding Rule | Example: W372S104JK6TEGC0FC
Capacitor Model Code (W37)
Rated Voltage (2S = 450V)
Rated Capacitance (104 = 0.1uF)
Capacitance Tolerance (J = 5%)
Lead Pitch / Axial Product Length (6 = 10.0mm)
Product Lead (T = CP 0.6)
Packaging Method and Lead Forming Code / Terminal Code (E = Straight leads, cut leads L20MM)
Internal Feature Code (GC0FC) |
