| Outline Check | Visual inspection and caliper measurement | Appearance is regular without visible damage; Mark is regular, clear and correct. |
| Terminal Strength (Pull) | Pull: 5 N, Direction: 180, Time: 101 s | No visible damage |
| Terminal Strength (Bend) | Pull: 2.5 N, Direction: 90, Times: 2 | No visible damage |
| Soldering Heat Resistance | Solder temperature: 2605, Immersion time: 10 s1 s | No visible damage |
| Solderability | Solder temperature: 2355, Immersion time: 2.0 s0.5 s | Lead surface well tinned, welding layer area 95% |
| Rapid Change of Temperature | A=-40, B=+125, 5 cycles, Duration: 30 min | No visible damage |
| Vibration | Frequency range: 10-500 Hz, Amplitude: 0.75 mm, Test duration per direction: 2 h | No visible damage |
| Bump | Times: 4000, Acceleration: 390 m/s, Pulse duration: 6 ms | No visible damage |
| Climate Sequence | Dry Heat (+125, 16h), Damp Heat Cyclic (Db, Severity b), Cold (-40, 2h), Damp Heat Cyclic (Db, Severity b) | Appearance no visible damage, marking clear. Capacitance change: |C/C| 5%, Tan increase: 0.008 (1kHz), I.R. 50% of rated value. |
| Damp Heat Steady State | Temperature: +402, Humidity: 93%2%RH, Duration: 21 Days | No visible damage. Capacitance change: |C/C| 5%, Tan change: 0.005 (1kHz), I.R. 50% of initial measurement. |
| Endurance | Temperature: +852, Duration: 1000 h, Test voltage: 1.25 UR | No visible damage, marking clear. Capacitance change: |C/C| 8%, Tan change: 0.005 (1kHz), I.R. 50% of initial measurement. |
| Temperature Characteristic | Static method at -40, +20, +105 | -3.6%C/C0 at -40; 0C/C+6.3% at +105. |
| Charging and Discharging | Times: 10000, Charging voltage: 1.0 UR, Charging/Discharging time: 0.5 s | Capacitance change: |C/C| 5%, Tan change: 0.005 (1kHz), I.R. 50% of initial measurement. |
