Home > Thin Film Capacitors >

Miniaturized Metallized Polyester Film Capacitor W222A182JD5L00A00A Rated 100V Capacitance 0.0018uF

Product Categories

Fixed Inductors [2693]
RF Filters [248]
Oscillators [540]
Crystals [2945]
Rotary Potentiometers, Rheostats [234]
Programmable Oscillators [242]
Ceramic Filters [216]
Delay Lines [5]
Aluminum Electrolytic Capacitors [2799]
Trimmer Potentiometers [1587]
Aluminum - Polymer Capacitors [1039]
Thumbwheel Potentiometers [25]
Common Mode Chokes [1562]
Chassis Mount Resistors [135]
Chip Resistor - Surface Mount [1995]
Capacitor Kits [6]
Resistor Kits [17]
Cable Ferrites [83]
EMI/RFI Filters (LC, RC Networks) [152]
Ferrite Beads and Chips [1587]
Arrays, Signal Transformers [34]
Value Display Potentiometers [4]
Resistor Networks, Arrays [593]
Through Hole Resistors [711]
Wireless Charging Coils [34]
Film Capacitors [835]
Thin Film Capacitors [914]
Ceramic Capacitors [2764]
Tantalum Capacitors [134]
Current Sense Resistors [124]
Power Line Filter Modules [49]
Resonators [79]
Capacitor Networks, Arrays [24]
Electric Double Layer Capacitors (EDLC), Supercapacitors [3]
Pin Configurable/Selectable Oscillators [13]
Silicon Capacitors [2]
Adjustable Power Resistor [64]
Specialized Resistors [144]
VCOs (Voltage Controlled Oscillators) [81]
Trimmers, Variable Capacitors [9]
Ferrite Cores [96]
Feed Through Capacitors [134]
Slide Potentiometers [123]
Motor Start, Motor Run Capacitors (AC) [29]
SAW Filters [201]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Miniaturized Metallized Polyester Film Capacitor W222A182JD5L00A00A Rated 100V Capacitance 0.0018uF

Tolerance : ±5%

Voltage Rating : 100V

Capacitance : 1.8nF

Operating Temperature : -55℃~+105℃

Dielectric Material : Metallized Polyester

Description : 1.8nF ±5% 100V Film Capacitor Metallized Polyester Through Hole P=5mm

Mfr. Part # : W222A182JD5L00A00A

Model Number : W222A182JD5L00A00A

Package : Through Hole,P=5mm

Contact Now

Product Specification Approval for Metallized Polyester Film Capacitors (Miniaturized)

This document outlines the specifications for the W22 series of miniaturized metallized polyester film capacitors, designed for various electronic applications. These capacitors offer reliable performance and compact dimensions.

Product Attributes

Brand: WDI ()
Product Type: Metallized Polyester Film Capacitor (Miniaturized)
Material: Metallized Polyester Film, Epoxy Resin (flame retardant UL94V-0)
Origin: Shenzhen, China ()
Certifications: UL94V-0 (for outer encapsulation)

Technical Specifications

Product Part Number	Model	Capacitance (uF)	Rated Voltage (V)	Capacitance Tolerance	Pitch (mm)	Body Dimensions (mm) (W x H x T)	Lead Diameter (mm)
W222A182JD5L00A00A	WDQV-182J-P5	0.0018	100	5% (J)	5.0	7.5 x 7.0 x 4.0	0.5

General Technical Parameters

Parameter	Specification
Reference Standards	GB/T 2693 (IEC 60384-1), GB/T 7332 (IEC 60384-2)
Climate Category	55/105/21
Rated Temperature	85
Operating Temperature Range	-55 ~ 105
Rated Voltage Options	63V, 100V, 250V, 400V
Capacitance Range	0.0001F ~ 1.0F
Capacitance Tolerance Options	5% (J), 10% (K)
Withstand Voltage	1.4UR (5s)
Dissipation Factor (tan )	1.0% (20, 1KHz)
Insulation Resistance	15000M (UR100V, CR0.33F) or 5000S (UR100V, CR>0.33F) (20, 1min) 15000M (UR>100V, CR0.33F) or 5000S (UR>100V, CR>0.33F) (20, 100V, 1min)

Reliability and Environmental Testing

Test Type	Standard	Conditions	Acceptance Criteria
Solderability	IEC 68-2-20	2355, 2.0s0.5s	Tinning on lead surface is good.
Resistance to Soldering Heat	IEC 68-2-20	2605, 10s1s	C/C: 2%, tan : 0.3% (1 KHz)
Rapid Change of Temperature	IEC 68-2-14	-55 to +105, 30min dwell, 5 cycles	C/C: 5%, tan : 0.3% (1 KHz), Insulation Resistance: 50% of initial.
Vibration	IEC 68-2-6	10-500Hz, 6 hours total	No visible damage or looseness.
Shock	IEC 68-2-29	4000 times, 390m/s, 6ms pulse	No visible damage or looseness.
Dry Heat	IEC 68-2-2	+105, 16 hours	No permanent breakdown, no visible damage, clear marking. C/C: 5%, tan : 0.3% (1 KHz), Insulation Resistance: 50% of initial.
Cold	IEC 68-2-1	-55, 2 hours	(See Dry Heat for acceptance criteria after cycle)
Low Pressure	IEC 68-2-13	1535, 8.5KPa, 1 hour (rated voltage applied in last 1 min)	(See Dry Heat for acceptance criteria after cycle)
Cyclic Damp Heat	IEC 68-2-30	Db, severity b, rated voltage applied for 1 min after test.	(See Steady State Damp Heat for acceptance criteria)
Steady State Damp Heat	IEC 68-2-3	402, 93+2/-3 %, 21 days	No visible damage, clear marking. C/C: 5%, tan : 0.5% (1 KHz), Insulation Resistance: 50% of initial.

Marking Description

Marking includes nominal capacitance (e.g., 182J), rated voltage (e.g., 100V), and tolerance.

Packaging Information

Available in bulk and tape-and-reel packaging. Dimensions for inner and outer boxes are provided for both configurations.

2405081155_WEIDY-W222A182JD5L00A00A_C22363879.pdf

Quality Miniaturized Metallized Polyester Film Capacitor W222A182JD5L00A00A Rated 100V Capacitance 0.0018uF for sale

Miniaturized Metallized Polyester Film Capacitor W222A182JD5L00A00A Rated 100V Capacitance 0.0018uF Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!