| Main Applications | DC-Link, medium-high freq. switching capacitor for industrial and motor speed controls, SMPS, solar inverters, power converters and UPS; not for new AC design. | DC-Link, medium-high freq. switching capacitor for industrial and motor speed controls, SMPS, solar inverters, power converters and UPS, also suitable for AC/ output AC filtering (not for across the line) applications. |
| Operating Temperature Range (Case) | -40...+85C (+100C observing voltage and current de-rating) | -40...+85C (+100C observing voltage and current de-rating) |
| Max. Permissible Ambient Temperature | +70C (+85C observing voltage and current de-rating); at Tamb > +95C Irms=0 | +70C (+85C observing voltage and current de-rating); at Tamb > +95C Irms=0 |
| Nominal Capacitance (Cn) | 0,68 F to 130 F | 0,68 F to 120 F |
| Capacitance Tolerance | 10% (K), 5% (J) | 10% (K), 5% (J) |
| Rated Voltage (Ur) (Vdc) at T=+85C | 575, 700, 800, 900, 1000, 1100, 1275 Vdc | 575, 700, 800, 900, 1000, 1100, 1275 Vdc |
| Permissible AC Voltage (Urms) (Vac) at T=+85C | Not applicable | 230, 275, 300, 330, 380, 400, 415 Vac (not for across the line) |
| Max. Admissible Voltage at T=+70C (Vdc) | 630, 770, 880, 1000, 1100, 1200, 1400 Vdc | Not applicable (refer to Ur) |
| Max. Admissible Voltage at T=+70C (Vac) | Not applicable | Not applicable (refer to Urms) |
| Max. Applicable Peak to Peak Ripple Voltage (Upp) | 0,2 x Ur (respecting current ratings) | Refer to article table |
| Max. Repetitive Peak Voltage (Upkr) | Up to T=+85C: 660-1465 Vdc; Up to T=+70C: 720-1610 Vdc | Up to T=+85C: 660-1465 Vdc; Not applicable for T=+70C (refer to Upkr @85C) |
| Non Recurrent Surge Voltage (Upk) | Up to T=+85C: 750-1655 Vdc; Up to T=+70C: 815-1820 Vdc | Up to T=+85C: 750-1655 Vdc; Not applicable for T=+70C (refer to Upk @85C) |
| Self Inductance | 1nH/mm of fixing pitch | 1nH/mm of fixing pitch |
| Maximum Pulse Rise Time (V/s) | Refer to article table | Refer to article table |
| Maximum Peak Current (Ipeak) | Refer to article table (Max. non repetitive Ipk = 1,5 x Ipeak) | Refer to article table (Max. non repetitive Ipk = 1,5 x Ipeak) |
| RMS Current (Irms) | Refer to article table (No superimposed Irms at Tamb > +95C) | Refer to article table (No superimposed Irms at Tamb > +95C) |
| Dissipation Factor (DF), max. (tg x10-4) | See table below | See table below |
| Typical ESR () | Refer to article table | Refer to article table |
| Insulation Resistance (RINS) | 3000s (10000s typical) but need not exceed 3 G | 3000s (10000s typical) but need not exceed 3 G |
| Test Voltage Between Terminals (Ut) | 1,5xUr (DC) | 1,5xUr (DC); 1,5xUrms (AC) |
| Test Voltage Between Terminals and Case (Utc) | 3kV 5060Hz for 60s | 3kV 5060Hz for 60s |
| Damp Heat Test (Steady State) | IEC60068 (not biased), AEC Q-200 cockpit (biased), IEC 60384-17:2019 Grade II (biased, MHBS ONLY) | IEC60068 (not biased), AEC Q-200 cockpit (biased) |
| Life Expectancy | 200000h at Ur, T(case)+70C; 100000h at Ur, T(case)=+85C; 30000h at de-rated Ur, T(case)=+100C (no ripple) | 60000h at Urms or 200000h at Ur, T(case)+70C; 30000h at Urms or 100000h at Ur, T(case)=+85C; 10000h at de-rated Urms or 30000h at de-rated Ur, T(case)=+100C (no ripple) |
| Failure Quota | 300/10^9 component hours (DC applications) | 300/10^9 component hours (DC applications); 1.5x standard (AC applications) |
