Home > Film Capacitors >

High frequency pulse capacitor Dersonic CFC2J224JG1IS50O8100 with flame retardant epoxy resin coating

Product Categories

Crystals [3000]
Delay Lines [5]
Aluminum - Polymer Capacitors [1170]
Aluminum Electrolytic Capacitors [3000]
Oscillators [539]
Thumbwheel Potentiometers [25]
Chassis Mount Resistors [135]
Chip Resistor - Surface Mount [2074]
Capacitor Kits [6]
Resistor Kits [17]
Cable Ferrites [84]
Common Mode Chokes [1585]
Arrays, Signal Transformers [34]
Value Display Potentiometers [4]
Ferrite Beads and Chips [1587]
Wireless Charging Coils [34]
Current Sense Resistors [126]
Power Line Filter Modules [49]
Capacitor Networks, Arrays [24]
Electric Double Layer Capacitors (EDLC), Supercapacitors [3]
EMI/RFI Filters (LC, RC Networks) [154]
Ceramic Capacitors [3000]
Film Capacitors [843]
Resistor Networks, Arrays [637]
Pin Configurable/Selectable Oscillators [13]
Stand Alone Programmers [1]
Fixed Inductors [3000]
Silicon Capacitors [2]
Ceramic Filters [216]
Adjustable Power Resistor [64]
Rotary Potentiometers, Rheostats [235]
Trimmer Potentiometers [1622]
Specialized Resistors [144]
VCOs (Voltage Controlled Oscillators) [81]
Through Hole Resistors [711]
Resonators [79]
Ferrite Cores [96]
Feed Through Capacitors [134]
Slide Potentiometers [123]
Tantalum - Polymer Capacitors [175]
Tantalum Capacitors [143]
RF Filters [231]
Motor Start, Motor Run Capacitors (AC) [29]
Thin Film Capacitors [999]
Programmable Oscillators [242]
Trimmers, Variable Capacitors [10]
SAW Filters [201]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

High frequency pulse capacitor Dersonic CFC2J224JG1IS50O8100 with flame retardant epoxy resin coating

Capacitance : 220nF

Operating Temperature : -40℃~+105℃

Tolerance : ±5%

Voltage Rating : 630V

Description : 220nF Film Capacitor ±5% 630V Through Hole P=15mm

Mfr. Part # : CFC2J224JG1IS50O8100

Model Number : CFC2J224JG1IS50O8100

Package : Through Hole,P=15mm

Contact Now

Product Overview

The DONGGUAN DERSONIC ELECTRONIC CO., LTD. CBB21 type metallized polypropylene film capacitor is designed for electronic equipment. It features a metallized polypropylene film dielectric, low high-frequency loss, small internal temperature rise, and flame retardant epoxy resin powder coating (UL94/V-0). This capacitor is widely used in high-frequency, DC, AC, and pulse circuits, including S-correction circuits for large screen monitors and applications requiring high frequency and high current pulses.

Product Attributes

Brand: Dersonic
Origin: Dongguan City, PRC
Material: Metallized polypropylene film dielectric, Flame retardant epoxy resin powder coating
Certifications: RoHS 2.0, Halogen-free, REACH, UL94/V-0

Technical Specifications

Description	Specification
Part No.	CFC2J224JG1IS50O8100
Reference Standard	GB/T 10190 (IEC 60384-16)
Climatic Category	40/105/21
Rated Temperature	85
Operating Temperature Range	-40~105 (+85 to +105: decreasing factor 1.25% per degree for rated voltage)
Rated Voltage (UR)	630V
Withstand Voltage	1008VDC
Capacitance	0.22UF 5% @ 1kHz, 1.0V, 20.0
Tangent of loss angle	0.001 max @ 1kHz, 1.0V, 20.0; 0.002 max @ 10kHz, 1.0V, 20.0; 0.006 max @ 100kHz, 1.0V, 20.0
Insulation Resistance	100000M min @ 100V, 1min
Maximum Pulse Rise Time (dV/dt)	900V/us
Dimensions (L x W x T)	24.0 x 11.5 x 6.5 mm
Lead Spacing	17.5 mm
Lead Diameter (d)	0.8 mm
Marking	CBB21/630V/0.22UF/J/F15//L24/17.511.56.5/ZNR C719325

Measurement and Testing

Test Item	Requirement	Test Method
Capacitance (CR)	Within the tolerance specified	1kHz (120Hz for C>10uF), 1.0V @ 20
Tangent of loss angle (tan)	0.001 max	1kHz (120Hz for C>10uF), 1.0V @ 20
Insulation resistance (IR)	100000M min	10kHz, 1.0V @ 20
Voltage proof (TV)	No permanent breakdown or flashover	Between terminals: 1.6 times rated voltage, 5sec.
Robustness of terminations	No wire breakage and no damage of capacitor	Tensile load (0.8mm: 10N, >0.8mm: 20N), Bending load (0.8mm: 5N, >0.8mm: 10N)
Solderability	Lead wire should be soldered with uniform coating on the axial direction over 3/4 of the circumferential direction.	Solder temperature: 260 5, Solder time: 5 0.5sec
Resistance to soldering heat	No marked defect	Solder temperature: 245 5, Solder time: 3 0.5sec
Vibration	C/C 3% max of the Initial value, tan 0.004 max of increased value, IR 50% min of the applicable limits	IEC 60068-2-6, test Fc (0.75mm displacement, 10Hz to 50Hz; Total duration 6h)
Bump	C/C 3% max of the Initial value, tan 0.004 max of increased value, IR 50% min of the applicable limits	IEC 60068-2-29, test Eb (Duration: 6ms, Times: 1000)
Rapid change of temperature	C/C 3% max of the Initial value, tan 0.004 max of increased value, IR 50% min of the applicable limits	IEC 60068-2-14, test Na (Cycles: 5, Duration at limits: 30 min)
Passive flammability test	Maximum burning time not exceeded, burning droplets/glowing parts shall not ignite tissue paper.	IEC 60384-1, 4.38 (Category B, Flame exposure time: 10s)

2509180925_Dersonic-CFC2J224JG1IS50O8100_C719325.pdf

Quality High frequency pulse capacitor Dersonic CFC2J224JG1IS50O8100 with flame retardant epoxy resin coating for sale

High frequency pulse capacitor Dersonic CFC2J224JG1IS50O8100 with flame retardant epoxy resin coating Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!