Home > Ferrite Beads and Chips >

Chip ferrite bead muRata BLM31KN102SN1L designed for electromagnetic noise suppression in electronics

Product Categories

Fixed Inductors [2693]
RF Filters [248]
Oscillators [540]
Crystals [2945]
Rotary Potentiometers, Rheostats [234]
Programmable Oscillators [242]
Ceramic Filters [216]
Delay Lines [5]
Aluminum Electrolytic Capacitors [2799]
Trimmer Potentiometers [1587]
Aluminum - Polymer Capacitors [1039]
Thumbwheel Potentiometers [25]
Common Mode Chokes [1562]
Chassis Mount Resistors [135]
Chip Resistor - Surface Mount [1995]
Capacitor Kits [6]
Resistor Kits [17]
Cable Ferrites [83]
EMI/RFI Filters (LC, RC Networks) [152]
Ferrite Beads and Chips [1587]
Arrays, Signal Transformers [34]
Value Display Potentiometers [4]
Resistor Networks, Arrays [593]
Through Hole Resistors [711]
Wireless Charging Coils [34]
Film Capacitors [835]
Thin Film Capacitors [914]
Ceramic Capacitors [2764]
Tantalum Capacitors [134]
Current Sense Resistors [124]
Power Line Filter Modules [49]
Resonators [79]
Capacitor Networks, Arrays [24]
Electric Double Layer Capacitors (EDLC), Supercapacitors [3]
Pin Configurable/Selectable Oscillators [13]
Silicon Capacitors [2]
Adjustable Power Resistor [64]
Specialized Resistors [144]
VCOs (Voltage Controlled Oscillators) [81]
Trimmers, Variable Capacitors [9]
Ferrite Cores [96]
Feed Through Capacitors [134]
Slide Potentiometers [123]
Motor Start, Motor Run Capacitors (AC) [29]
SAW Filters [201]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Chip ferrite bead muRata BLM31KN102SN1L designed for electromagnetic noise suppression in electronics

Current Rating : 2A

Number of Circuits : 1

DC Resistance(DCR) : 75mΩ

Tolerance : ±25%

Impedance @ Frequency : 1kΩ@100MHz

Description : 1kΩ@100MHz 1 Line Ferrite Bead 1206 2A 75mΩ

Mfr. Part # : BLM31KN102SN1L

Model Number : BLM31KN102SN1L

Package : 1206

Contact Now

Chip Ferrite Bead BLM31KN_SN Series

The Chip Ferrite Bead BLM31KN_SN Series is designed for noise suppression applications. These components are ideal for use in various electronic circuits where filtering of unwanted high-frequency noise is critical. Their compact size and high performance make them suitable for densely populated PCBs.

Product Attributes

Brand: MURATA MFG.CO., LTD.
Product ID: BLM
Type: KN_SN Series
Packaging: L (Taping) / B (Bulk)

Technical Specifications

MURATA Part Number	Impedance () (at 100MHz)	Rated Current (mA)	DC Resistance () max.	Operating Temperature (C)	Dimensions (LW) (mm)	Unit Mass (g)
BLM31KN121SN1L	12025%	6000	0.009	-55 to +125	3.2 x 1.6	0.041
BLM31KN121SN1B	12025%	6000	0.009	-55 to +125	3.2 x 1.6	0.041
BLM31KN271SN1L	27025%	4500	0.016	-55 to +125	3.2 x 1.6	0.041
BLM31KN271SN1B	27025%	4500	0.016	-55 to +125	3.2 x 1.6	0.041
BLM31KN471SN1L	47025%	4000	0.02	-55 to +125	3.2 x 1.6	0.041
BLM31KN471SN1B	47025%	4000	0.02	-55 to +125	3.2 x 1.6	0.041
BLM31KN601SN1L	60025%	2900	0.038	-55 to +125	3.2 x 1.6	0.041
BLM31KN601SN1B	60025%	2900	0.038	-55 to +125	3.2 x 1.6	0.041
BLM31KN801SN1L	80025%	2500	0.05	-55 to +125	3.2 x 1.6	0.041
BLM31KN801SN1B	80025%	2500	0.05	-55 to +125	3.2 x 1.6	0.041
BLM31KN102SN1L	100025%	2000	0.075	-55 to +125	3.2 x 1.6	0.041
BLM31KN102SN1B	100025%	2000	0.075	-55 to +125	3.2 x 1.6	0.041

Environmental Performance Summary

Test Item	Specification
Temperature Cycle	100 cycles, -55C to +125C
Humidity	40C, 90-95% RH, 1000h
Heat Life	85C, Rated Current, 1000h
Cold Resistance	-55C, 1000h

Packaging Specification

Item	Specification
Tape Width	8mm
Pitch	4mm
Quantity per Reel	2500 pcs. / reel (180mm reel)
Plastic Tape Pull Strength	5N min.
Cover Tape Pull Strength	10N min.
Cover Tape Peeling off force	0.2N to 0.7N

Cautions

Excessive surge current can lead to product failure.
Consult Murata before using in high-reliability applications such as aircraft, medical, or transportation equipment.

Notice

Designed for solder mounting. Consult for alternative mounting methods.
Standard land pattern dimensions for reflow soldering are provided.
Recommended soldering conditions for reflow soldering are detailed, including flux, solder type, and temperature profiles.

2112221030_muRata-BLM31KN102SN1L_C560056.pdf

Quality Chip ferrite bead muRata BLM31KN102SN1L designed for electromagnetic noise suppression in electronics for sale

Chip ferrite bead muRata BLM31KN102SN1L designed for electromagnetic noise suppression in electronics Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!