| Scope | Application | Capacitors for type MPP (Metallized Polypropylene Film Capacitor) |
| Operation Temperature | Operating Range | -40 ~ +105 |
| Capacitance Range | Value | 0.001uF ~ 15 uF |
| Capacitance Tolerance | Tolerance Codes | 2%(G), 3%(I), 5%(J), 10%(K), 20%(M) |
| Rated Voltage | DC Voltage Ratings | 50VDC, 63VDC, 100VDC, 250VDC, 400VDC, 450VDC, 630VDC, 1KVDC |
| Champion Part No. Structure | Components | (tape) (capacitance) (tolerance) (rated voltage) (Dc/Ac) (Size) (lead forming) (lead pitch) (lead length) |
| Tape Codes | Tape Type | PEI, MEF, MEM, MPP, PEN, PPN, PPS, MEC, MET |
| Capacitance Codes | Capacitance Values | 101 (0.0001uF), 102 (0.001uF), 103 (0.01uF), 104 (0.1uF), 105 (1uF), 106 (10uF) |
| Tolerance Codes | Tolerance Values | F (1%), G (2%), H (2.5%), I (3%), J (5%), K (10%), M (20%) |
| Rated Voltage Representation | Format | e.g., 0630 -> 630V, 1000 -> 1KV |
| DC/AC Indicator | Type | DDC; AAC |
| Size Format | Dimensions | e.g., 090805(W)9mm*(H)8mm*(T)5mm |
| Lead Forming Codes | Forming Types | B, K, R, U, W, T, S (TAPING, Customer Special Require) |
| Lead Pitch Codes | Pitch Values | 08 (7.5mm), 10 (10mm), 15 (15mm), 20 (20mm), 28 (27.5mm) |
| Lead Length Codes | Length Values | 04 (4mm), 08 (8mm), 10 (10mm), 13 (13mm), 23 (23mm), 30 (30mm), 40 (40mm) |
| Specifications Standard | Reference | JIS 5115, IEC384-16 |
| Withstand Voltage | Test (Terminals) | 150% Of Rated Voltage, 60sec. (No abnormality) |
| Withstand Voltage | Test (Terminal to Enclosure) | UR200+1000VDC, 60sec. (No abnormality) |
| Insulation Resistance | Test (CR 0.33uF) | IR 9,000M (Measured at 10015VDC, For 60sec / 25) |
| Insulation Resistance | Test (CR > 0.33uF) | IR 3,000 (M. uF) (Measured at 10015VDC, For 60sec / 25) |
| Capacitance | Test | Within the tolerance specified (1KHz, 1Vrms Max. at 25) |
| Dissipation Factor | Test | 0.001 (0.1%) Max. (1KHz, 1Vrms Max. at 25) |
| Tense Strength of Terminal | Test | 1.0 Kg Load Force, 10 1sec Holding Time (No wire breakage and No Damage of Capacitor) |
| Bending Strength of Terminal | Test | 0.5 Kg Load Force, 4 x 90 in 5sec Bending Time (No wire breakage and No Damage of Capacitor) |
| Vibration | Test | Frequency: 10~55~10Hz (1min/cycle), Distance: 1.5mm, Axis: X, Y, Z, Time: 2h/axis (6h total) (Appearance: No Visible Damage, Contact: Normal) |
| Solder-ability | Test | 75% Of The Surface Tinning (Solder temp: 2705, Solder time: 30.5sec) |
| Heat Shock Test | Test | Solder temp: 2705, Solder time: 30.5sec, Test Voltage: 150% of Rated Voltage for 1min. (Appearance: No Visible Damage, Withstand Voltage: Normal, Capacitance Change: 3% of Initial Value) |
| Cold Resistance | Test | Test Temp: -40, Test Times: 2Hrs (Appearance: No Visible Damage, Capacitance Change: 0~ -10% of Initial Value) |
| Dry Heat Resistance | Test | Test Temp: 105 2, Test Times: 2Hrs (Appearance: No Visible Damage, Withstand Voltage: Normal, Capacitance Change: +5~ -2% of Initial Value, Insulation Resistance: CR 0.33uF 2,700M; CR > 0.33uF 900 M) |
| Humidity Resistance | Test | Test Temp: -40 2, RH: 90 ~ 95%, Test Times: 2408 HRS, Test Voltage: 130% of Rated Voltage for 1min. (Appearance: No Visible Damage, Withstand Voltage: Normal, Capacitance Change: 10% of Initial Value, Insulation Resistance: CR 0.33uF 2,700M; CR > 0.33uF 900 M, DF (tan) 0.001) |
| Heat Resistance (Charge & Discharge) | Test | Test Voltage: Rated Voltage Charge 2s, Discharge 2s, Repeated 100,0001000 cycles; Test Temp: 1052 (Appearance: No Visible Damage, DF (tan) 0.001, Capacitance Change: 10% of Initial Value, Insulation Resistance: Over 3000M ) |
| Heat Resistance (Continuous) | Test | Test Voltage: 125% of Rated Voltage, Test Temp: 1052, Test Times: 50024Hrs (Appearance: No Visible Damage, DF (tan) 0.001, Capacitance Change: 7% of Initial Value, Insulation Resistance: Over 3000M ) |
