| Scope | Capacitors for type MPP (Metallized Polypropylene Film Capacitor) |
| Operation Temperature | -40 ~ +105 |
| Capacitance Range | 0.001uF ~ 15 uF |
| Capacitance Tolerance | 2%(G), 3%(I), 5%(J), 10%(K), 20%(M) |
| Rated Voltage | 50VDC, 63VDC, 100VDC, 250VDC, 400VDC, 450VDC, 630VDC, 1KVDC |
| Test Items | Performance |
| Withstand voltage (Between Terminals) | 150% Of Rated Voltage, 60sec. Shall be no abnormality |
| Withstand voltage (Between terminal and Enclosure) | UR200+1000VDC, 60sec. Shall be no abnormality |
| Insulation resistance (Between Terminals) CR 0.33uF | IR 9,000M (Measured at 10015VDC, For 60sec / 25) |
| Insulation resistance (Between Terminals) CR > 0.33uF | IR 3,000 (M. uF) (Measured at 10015VDC, For 60sec / 25) |
| Capacitance | Within the tolerance specified (1KHz, 1Vrms Max. at 25) |
| Dissipation Factor | 0.001 (0.1%) Max. (1KHz, 1Vrms Max. at 25) |
| Tense Strength of Terminal | No wire breakage and No Damage of Capacitor (Load Force: 1.0 Kg, Holding Time: 10 1sec) |
| Bending Strength of Terminal | No wire breakage and No Damage of Capacitor (Load Force: 0.5 Kg, Bending Time: 4 x 90 in 5sec) |
| Vibration | Appearance: No Visible Damage, Contact: Normal (Frequency change: 1min. per cycle 10~55~10Hz, Vibration distance: 1.5mm, course: X, Y, Z axis, Time: 2h / axis (6h in total)) |
| Solder-ability | 75% Of The Surface Tinning (Solder temperature: 2705, Solder time: 30.5sec) |
| Heat Shock test | Appearance: No Visible Damage, Withstand Voltage: Normal, Capacitance Change: 3% of The Initial Value (Solder temperature: 2705, Solder time: 30.5sec, Test Voltage: 150% of The Rate Voltage For 1min.) |
| Cold Resistance | Appearance: No Visible Damage, Capacitance Change: 0~ -10% of The Initial Value (Test Temperature: -40, Test Times: 2Hrs) |
| Dry Heat Resistance | Appearance: No Visible Damage, Withstand Voltage: Normal, Capacitance Change: +5~ -2% Of The Initial Value, Insulation Resistance: CR 0.33uF IR 2,700M, CR > 0.33uF IR 900 M (TEST TEMPERATURE: 105 2, Test Times: 2Hrs) |
| Humidity Resistance | Appearance: No Visible Damage, Withstand Voltage: Normal, Capacitance Change: 10% of The Initial Value, Insulation Resistance: CR 0.33uF IR 2,700M, CR > 0.33uF IR 900 M, DF ( tan) 0.001 (TEST TEMPERATURE: -40 2, RELATIVE HUMIDITY: 90 ~ 95%, Test Times: 2408 HRS, TEST VOLTAGE: 130% of The Rated Voltage for 1 min.) |
| Heat Resistance (Charge & Discharge) | Appearance: No Visible Damage, DF ( tan) 0.001, Capacitance Change: 10% of The Initial Value, Insulation Resistance: Over 3000M (Test Voltage: Rated Voltage Charge for 2 sec. Discharge for 2 sec. Repeated For 100,0001000 cycles, Test Temperature: 1052) |
| Heat Resistance ( Continuous) | Appearance: No Visible Damage, DF ( tan) 0.001, Capacitance Change: 7% of The Initial Value, Insulation Resistance: Over 3000M (Test Voltage: 125% of The Rated Voltage, Test Temperature:1052, Test Times: 50024Hrs) |
