| Scope | Capacitors for type MPP (Metallized Polypropylene Film Capacitor) |
| Operation Temperature | -40 ~ +105 |
| Capacitance Range | 0.001uF ~ 15 uF |
| Capacitance Tolerance | 2%(G), 3%(I), 5%(J), 10%(K), 20%(M) |
| Rated Voltage | 50VDC, 63VDC, 100VDC, 250VDC, 400VDC, 450VDC, 630VDC, 1KVDC |
| Champion Part No. Structure | (tape) (capacitance) (tolerance) (rated voltage) (Dc/Ac) (Size) (lead forming) (lead pitch) (lead length) |
| Tape Options (6-1) | PEI, MEF, MEM, MPP, PEN, PPN, PPS, MEC, MET |
| Capacitance Codes (6-2) | 101 (0.0001uF), 102 (0.001uF), 103 (0.01uF), 104 (0.1uF), 105 (1uF), 106 (10uF) |
| Tolerance Codes (6-3) | F (1%), G (2%), H (2.5%), I (3%), J (5%), K (10%), M (20%) |
| Rated Voltage Example (6-4) | 0630 -> 630V, 1000 -> 1KV |
| DC/AC Indicator (6-5) | D (DC), A (AC) |
| Size Format (6-6) | 090805 (W)9*(H)8*(T)5 |
| Lead Forming Codes (6-7) | B, K, R, U, W, T, S (TAPING, Customer Special Require) |
| Lead Pitch Codes (6-8) | 08 (7.5mm), 10 (10mm), 15 (15mm), 20 (20mm), 28 (27.5mm) |
| Lead Length Codes (6-9) | 04 (4mm), 08 (8mm), 10 (10mm), 13 (13mm), 23 (23mm), 30 (30mm), 40 (40mm) |
| Specifications Standard | JIS 5115, IEC384-16 |
| Test Items - Withstand Voltage (7-1) | Between Terminals: 150% of Rated Voltage, 60sec. Between terminal and Enclosure: UR200+1000VDC, 60sec. |
| Test Items - Insulation Resistance (7-2) | CR 0.33uF: IR 9,000M. CR > 0.33uF: IR 3,000 (M. uF). Measured at 10015VDC, 60sec / 25. |
| Test Items - Capacitance (7-3) | Within the tolerance specified. Measured at 1KHz, 1Vrms Max. at 25. |
| Test Items - Dissipation Factor (7-4) | 0.001 (0.1%) Max. Measured at 1KHz, 1Vrms Max. at 25. |
| Test Items - Tense Strength of Terminal (7-5) | No wire breakage and no damage of capacitor. Load Force: 1.0 Kg, Holding Time: 10 1sec. |
| Test Items - Bending Strength of Terminal (7-6) | No wire breakage and no damage of capacitor. Load Force: 0.5 Kg, Bending Time: 4 x 90 in 5sec. |
| Test Items - Vibration (7-7) | Appearance: No Visible Damage. Contact: Normal. Frequency: 10~55~10Hz (1min/cycle). Distance: 1.5mm. Axis: X, Y, Z. Time: 2h/axis (6h total). |
| Test Items - Solder-ability (7-8) | 75% of the surface tinning. Solder temperature: 2705, Solder time: 30.5sec. |
| Test Items - Heat Shock test (7-9) | Appearance: No Visible Damage. Withstand Voltage: Normal. Capacitance Change: 3% of Initial Value. Terminal immersed in melting solder (2705, 30.5sec). Test Voltage: 150% of Rated Voltage for 1min. |
| Test Items - Cold Resistance (7-10) | Appearance: No Visible Damage. Capacitance Change: 0~ -10% of Initial Value. Test Temperature: -40, Test Times: 2Hrs. |
| Test Items - Dry Heat Resistance (7-11) | Appearance: No Visible Damage. Withstand Voltage: Normal. Capacitance Change: +5~ -2% of Initial Value. Insulation Resistance: CR 0.33uF: IR 2,700M. CR > 0.33uF: IR 900 M. Test Temperature: 105 2, Test Times: 2Hrs. |
| Test Items - Humidity Resistance (7-12) | Appearance: No Visible Damage. Withstand Voltage: Normal. Capacitance Change: 10% of Initial Value. Insulation Resistance: CR 0.33uF: IR 2,700M. CR > 0.33uF: IR 900 M. DF (tan): 0.001. Test Temperature: -40 2, Relative Humidity: 90 ~ 95%, Test Times: 2408 HRS, Test Voltage: 130% of Rated Voltage for 1 min. |
| Test Items - Heat Resistance ( Charge & Discharge) (7-13) | Appearance: No Visible Damage. DF (tan): 0.001. Capacitance Change: 10% of Initial Value. Insulation Resistance: Over 3000M . Test Voltage: Rated Voltage Charge for 2 sec, Discharge for 2 sec. Repeated For 100,0001000 cycles. Test Temperature: 1052. |
| Test Items - Heat Resistance ( Continuous) (7-14) | Appearance: No Visible Damage. DF (tan): 0.001. Capacitance Change: 7% of Initial Value. Insulation Resistance: Over 3000M . Test Voltage: 125% of Rated Voltage. Test Temperature: 1052. Test Times: 50024Hrs. |
| Dimensions Reference (9) | nF, mm. W (Max), T (Max), H (Max), A (Min) 1.5mm (max), P 0 5, d 0.05mm |
| Convention Marking (10) | CAPACITANCE CODE (e.g., 104), CAPACITANCE TOLERANCE (e.g., K), Rated voltage (e.g., 275V DC) |
