| Scope | Type MPP (Metallized Polypropylene Film Capacitor) | Capacitor for interference suppression |
| Operation Temperature | -40 ~ +105 |
| Capacitance Range | 0.001uF ~ 15 uF |
| Capacitance Tolerance | 2%(G), 3%(I), 5%(J), 10%(K), 20%(M) |
| Rated Voltage | 50VDC, 63VDC, 100VDC, 250VDC, 400VDC, 450VDC, 630VDC, 1KVDC |
| Champion Part No. Structure | 1. Tape | PEI, MEF, MEM, MPP, PEN, PPN, PPS, MEC, MET |
| 2. Capacitance | 101 (0.0001uF), 102 (0.001uF), 103 (0.01uF), 104 (0.1uF), 105 (1uF), 106 (10uF) |
| 3. Tolerance | F (1%), G (2%), H (2.5%), I (3%), J (5%), K (10%), M (20%) |
| 4. Rated Voltage | Example: 0630 -> 630V, 1000 -> 1KV |
| 5. DC/AC | D (DC), A (AC) |
| 6. Size | Format: (W)x(H)x(T), e.g., 090805 (W)9*(H)8*(T)5 |
| 7. Lead Forming | B, K, R, U, W, T, S (TAPING, Customer Special Require) |
| 8. Lead Pitch | Code 08 (7.5mm), 10 (10mm), 15 (15mm), 20 (20mm), 28 (27.5mm) |
| 9. Lead Length | Code 04 (4mm), 08 (8mm), 10 (10mm), 13 (13mm), 23 (23mm), 30 (30mm), 40 (40mm) |
| Specifications (JIS 5115, IEC384-16) | Withstand Voltage (Terminals) | 150% of Rated Voltage, 60sec. |
| Withstand Voltage (Terminal/Enclosure) | UR200+1000VDC, 60sec. |
| Insulation Resistance (Terminals) | CR 0.33uF: IR 9,000M; CR > 0.33uF: IR 3,000 (M. uF) at 10015VDC, 60sec/25 |
| Capacitance | Within the tolerance specified at 1KHz, 1Vrms Max. at 25 |
| Dissipation Factor | 0.001 (0.1%) Max. at 1KHz, 1Vrms Max. at 25 |
| Tense Strength of Terminal | No wire breakage/damage. Load: 1.0 Kg, Time: 10 1sec |
| Bending Strength of Terminal | No wire breakage/damage. Load: 0.5 Kg, Bending: 4 x 90 in 5sec |
| Reliability Tests | Vibration | Appearance: No Visible Damage; Contact: Normal. Freq: 10~55~10Hz (1min/cycle), Dist: 1.5mm, Axis: X,Y,Z, Time: 2h/axis (6h total) |
| Solder-ability | 75% of Surface Tinning. Solder Temp: 2705, Time: 30.5sec |
| Heat Shock Test | Appearance: No Visible Damage; Withstand Voltage: Normal; Capacitance Change: 3% of Initial. Solder Temp: 2705, Time: 30.5sec, Test Voltage: 150% Rated Voltage for 1min. |
| Cold Resistance | Appearance: No Visible Damage; Capacitance Change: 0~ -10% of Initial. Temp: -40, Time: 2Hrs |
| Dry Heat Resistance | Appearance: No Visible Damage; Withstand Voltage: Normal; Capacitance Change: +5~ -2% of Initial; Insulation Resistance: CR 0.33uF: IR 2,700M; CR > 0.33uF: IR 900 M. Temp: 105 2, Time: 2Hrs |
| Humidity Resistance | Appearance: No Visible Damage; Withstand Voltage: Normal; Capacitance Change: 10% of Initial; Insulation Resistance: CR 0.33uF: IR 2,700M; CR > 0.33uF: IR 900 M; DF (tan): 0.001. Temp: -40 2, RH: 90~95%, Time: 2408 HRS, Test Voltage: 130% Rated Voltage for 1min. |
| Heat Resistance (Continuous) | Appearance: No Visible Damage; DF (tan): 0.001; Capacitance Change: 7% of Initial; Insulation Resistance: Over 3000M . Test Voltage: 125% Rated Voltage, Temp: 1052, Time: 50024Hrs |
| Dimensions | Refer to diagram (W, T, H, A, P, d) | Nominal Capacitance Unit: nF; Dimension Unit: mm |
| Convention Marking | CAPACITANCE CODE (e.g., 104), CAPACITANCE TOLERANCE (e.g., K), Rated Voltage (e.g., 275V DC) | |
