| Scope | Type MPP Capacitor | Metallized Polypropylene Film Capacitor |
| Operation Temperature | -40 ~ +105 | |
| Capacitance Range | 0.001uF ~ 15 uF | |
| Capacitance Tolerance | 2%(G), 3%(I), 5%(J), 10%(K), 20%(M) | |
| Rated Voltage | 50VDC, 63VDC, 100VDC, 250VDC, 400VDC, 450VDC, 630VDC, 1KVDC | |
| Champion Part No. Coding | 1. Tape | PEI, MEF, MEM, MPP, PEN, PPN, PPS, MEC, MET |
| 2. Capacitance | 101 (0.0001uF), 102 (0.001uF), 103 (0.01uF), 104 (0.1uF), 105 (1uF), 106 (10uF) |
| 3. Tolerance | F (1%), G (2%), H (2.5%), I (3%), J (5%), K (10%), M (20%) |
| 4. Rated Voltage | e.g., 0630 -> 630V, 1000 -> 1KV | |
| 5. DC/Ac | D (DC), A (AC) | |
| 6. Size | e.g., 090805 -> (W)9*(H)8*(T)5 | |
| 7. Lead Forming | B, K, R, U, W, T, S (TAPING, Customer Special Require) | |
| 8. Lead Pitch | 08 (7.5mm), 10 (10mm), 15 (15mm), 20 (20mm), 28 (27.5mm) | |
| 9. Lead Length | 04 (4mm), 08 (8mm), 10 (10mm), 13 (13mm), 23 (23mm), 30 (30mm), 40 (40mm) | |
| Specifications (JIS 5115, IEC384-16) | Withstand Voltage (Terminals) | 150% of Rated Voltage, 60sec. (No abnormality) |
| Withstand Voltage (Terminal/Enclosure) | UR200+1000VDC, 60sec. (No abnormality) |
| Insulation Resistance (Terminals) | CR 0.33uF: IR 9,000M; CR > 0.33uF: IR 3,000 (M. uF) (Measured at 10015VDC, 60sec / 25) |
| Capacitance | Within the tolerance specified (1KHz, 1Vrms Max. at 25) |
| Dissipation Factor | 0.001 (0.1%) Max. (1KHz, 1Vrms Max. at 25) |
| Tense Strength of Terminal | No wire breakage and No Damage of Capacitor (Load Force: 1.0 Kg, Holding Time: 10 1sec) |
| Bending Strength of Terminal | No wire breakage and No Damage of Capacitor (Load Force: 0.5 Kg, Bending Time: 4 x 90 in 5sec) |
| Vibration | Appearance: No Visible Damage; Contact: Normal (Frequency: 10~55~10Hz, Distance: 1.5mm, Course: X,Y,Z axis, Time: 2h/axis (6h total)) |
| Solder-ability | 75% Of The Surface Tinning (Solder temp: 2705, Solder time: 30.5sec) |
| Heat Shock Test | Appearance: No Visible Damage; Withstand Voltage: Normal; Capacitance Change: 3% of Initial Value (Solder temp: 2705, Solder time: 30.5sec, Test Voltage: 150% of Rated Voltage for 1min.) |
| Cold Resistance | Appearance: No Visible Damage; Capacitance Change: 0~ -10% of Initial Value (Test Temp: -40, Test Times: 2Hrs) |
| Dry Heat Resistance | Appearance: No Visible Damage; Withstand Voltage: Normal; Capacitance Change: +5~ -2% of Initial Value; Insulation Resistance: CR 0.33uF: IR 2,700M; CR > 0.33uF: IR 900 M (TEST TEMP: 105 2, Test Times: 2Hrs) |
| Humidity Resistance | Appearance: No Visible Damage; Withstand Voltage: Normal; Capacitance Change: 10% of Initial Value; Insulation Resistance: CR 0.33uF: IR 2,700M; CR > 0.33uF: IR 900 M; DF (tan): 0.001 (TEST TEMP: -40 2, RH: 90 ~ 95%, Test Times: 2408 HRS, TEST VOLTAGE: 130% of Rated Voltage for 1 min.) |
| Heat Resistance (Charge & Discharge) | Appearance: No Visible Damage; DF (tan): 0.001; Capacitance Change: 10% of Initial Value; Insulation Resistance: Over 3000M (Test Voltage: Rated Voltage Charge/Discharge 2sec each, 100,0001000 cycles; Test Temp: 1052) |
| Heat Resistance (Continuous) | Appearance: No Visible Damage; DF (tan): 0.001; Capacitance Change: 7% of Initial Value; Insulation Resistance: Over 3000M (Test Voltage: 125% of Rated Voltage; Test Temp: 1052; Test Times: 50024Hrs) |
