| Scope | Capacitor for type MPP (Metallized Polypropylene Film Capacitor) |
| Operation Temperature | -40 ~ +105 |
| Capacitance Range | 0.001uF ~ 15 uF |
| Capacitance Tolerance | 2%(G), 3%(I), 5%(J), 10%(K), 20%(M) |
| Rated Voltage | 50VDC, 63VDC, 100VDC, 250VDC, 400VDC, 450VDC, 630VDC, 1KVDC |
| Champion Part No. Structure | (1 2 3 4 5 6 7 8 9) |
| Part No. Breakdown | 1. Tape | PEI, MEF, MEM, MPP, PEN, PPN, PPS, MEC, MET |
| 2. Capacitance | 101 (0.0001uF), 102 (0.001uF), 103 (0.01uF), 104 (0.1uF), 105 (1uF), 106 (10uF) |
| 3. Tolerance | F (1%), G (2%), H (2.5%), I (3%), J (5%), K (10%), M (20%) |
| 4. Rated Voltage | e.g., 0630 -> 630V, 1000 -> 1KV |
| 5. DC/Ac | D (DC), A (AC) |
| 6. Size | e.g., 090805 -> (W)9*(H)8*(T)5 |
| 7. Lead Forming | B, K, R, U, W, T, S (TAPING, Customer Special Require) |
| 8. Lead Pitch | 08 (7.5mm), 10 (10mm), 15 (15mm), 20 (20mm), 28 (27.5mm) |
| 9. Lead Length | 04 (4mm), 08 (8mm), 10 (10mm), 13 (13mm), 23 (23mm), 30 (30mm), 40 (40mm) |
| Specifications (JIS 5115, IEC384-16) | Test Items | Performance & Test Method |
| Withstand voltage (Between Terminals) | 150% Of Rated Voltage, 60sec. Shall be no abnormality. |
| Withstand voltage (Between terminal and Enclosure) | UR200+1000VDC, 60sec. Shall be no abnormality. |
| Insulation resistance (Between Terminals) | CR 0.33uF IR 9,000M; CR > 0.33uF IR 3,000 (M. uF). Measured at 10015VDC, For 60sec / 25. |
| Capacitance | Within the tolerance specified. 1KHz, 1Vrms Max. at 25. |
| Dissipation Factor | 0.001 (0.1%) Max. 1KHz, 1Vrms Max. at 25. |
| Tense Strength of Terminal | 1.0 Kg Load Force, 10 1sec Holding Time. No wire breakage and No Damage of Capacitor. |
| Bending Strength of Terminal | 0.5 Kg Load Force, 4 x 90 in 5sec Bending Time. No wire breakage and No Damage of Capacitor. |
| Vibration | (1) Appearance: No Visible Damage (2) Contact: Normal. Frequency 10~55~10Hz (1min/cycle), 1.5mm distance, X,Y,Z axis (2h/axis, 6h total). |
| Solder-ability | 75% Of The Surface Tinning. Solder temperature: 2705, Solder time: 30.5sec. |
| Heat Shock test | (1) Appearance: No Visible Damage (2) Withstand Voltage: Normal (3) Capacitance Change: 3% of The Initial Value. Solder temperature: 2705, Solder time: 30.5sec. Test Voltage: 150% of The Rated Voltage For 1min. |
| Cold Resistance | (1) Appearance: No Visible Damage (2) Capacitance Change: 0~ -10% of The Initial Value. Test Temperature: -40, Test Times: 2Hrs. |
| Dry Heat Resistance | (1) Appearance: No Visible Damage (2) Withstand Voltage: Normal (3) Capacitance Change: +5~ -2% Of The Initial Value (4) Insulation Resistance: CR 0.33uF IR 2,700M; CR > 0.33uF IR 900 M. TEST TEMPERATURE: 105 2, Test Times: 2Hrs. |
| Humidity Resistance | (1) Appearance: No Visible Damage (2) Withstand Voltage: Normal (3) Capacitance Change: 10% of The Initial Value (4) Insulation Resistance: CR 0.33uF IR 2,700M; CR > 0.33uF IR 900 M (5) DF ( tan) 0.001. TEST TEMPERATURE: -40 2, RELATIVE HUMIDITY: 90 ~ 95%, Test Times: 2408 HRS, TEST VOLTAGE: 130% of The Rated Voltage for 1 min. |
| Heat Resistance (Charge & Discharge) | (1) Appearance: No Visible Damage (2) DF ( tan) 0.001 (3) Capacitance Change: 10% of The Initial Value (4) Insulation Resistance: Over 3000M . Test Voltage: Rated Voltage Charge for 2 sec. Discharge for 2 sec. Repeated For 100,0001000 cycles. Test Temperature: 1052. |
| Heat Resistance ( Continuous) | (1) Appearance: No Visible Damage (2) DF ( tan) 0.001 (3) Capacitance Change: 7% of The Initial Value (4) Insulation Resistance: Over 3000M . Test Voltage: 125% of The Rated Voltage. Test Temperature:1052. Test Times: 50024Hrs. |
