| Operating Temperature Range | -40~+105 (UR(dc):+85~+105: Rated voltage derating 1.25%/; UR(ac): +75 to +105: Rated voltage derating 1.35%/) | |
| Climatic Category | 40/105/56 | |
| Rated Temperature | +85 | |
| Capacitance Range | 0.001F2.2F | |
| Capacitance Tolerance Codes | G=2%; H=3%; J=5%; K=10% | |
| Rated Voltage (Vdc) | 250Vdc, 400Vdc, 630Vdc, 1000Vdc, 1600Vdc, 2000Vdc | |
| Dissipation Factor (DF) | 0.1% (1KHz at 20~25) | |
| Insulation Resistance | 50000M for C0.33uF (100VDC, 60s); 10000M*uF for C>0.33uF (100VDC, 60s) | |
| Withstand Voltage | 1.6UR for 5 seconds | |
| Max. Pulse Rise Time (dV/dt) | Refer to table in source document (dependent on UR and P value) | |
| Terminal Strength (Tensile) | No visible mechanical damage (0.6&0.8mm wire dia., 10N load, 10s) | GB 10190, IEC60384-16 |
| Terminal Strength (Bending) | No visible mechanical damage (0.6&0.8mm wire dia., 5N force, 902 times) | GB 10190, IEC60384-16 |
| Solderability | Tinning rate 95% (2455, 2.50.5s immersion) | GB 10190, IEC60384-16 |
| Soldering Heat Resistance | Appearance: No visible damage; DF increase 0.002; Capacitance change C/C 3% (2605 immersion, 101s) | GB 10190, IEC60384-16 |
| Temperature Cycling | Appearance: No visible damage; Capacitance change C/C 3%; DF increase 0.002; Insulation Resistance IR/IR 50% (-40 to +105, 5 cycles) | GB 10190, IEC60384-16 |
| Vibration | Appearance: No visible damage; Capacitance change C/C 3%; DF increase 0.002; Insulation Resistance IR/IR 50% (Amplitude 0.75mm or 98m/s, 10-500Hz, 2h/direction, 6h total) | GB 10190, IEC60384-16 |
| Shock | Appearance: No visible damage; Capacitance change C/C 3%; DF increase 0.002; Insulation Resistance IR/IR 50% (4000 times, 390m/s, 6ms pulse duration) | GB 10190, IEC60384-16 |
| Climate Sequence Test | Appearance: No visible damage; Capacitance change C/C 3%; DF increase 0.003; Insulation Resistance IR/IR 50% (+105 16h, cyclic damp heat, -40 2h, low pressure 8.5kPa 1h) | GB 10190, IEC60384-16 |
| Steady State Damp Heat | Appearance: No visible damage; Capacitance change C/C 5%; DF increase 0.002; Insulation Resistance IR/IR 50% (90-95%RH, 402, 56 days) | GB 10190, IEC60384-16 |
| Endurance Test | Appearance: No visible damage; Capacitance change C/C 5%; DF increase 0.004; Insulation Resistance IR/IR 50% (85, 1000h, 1.25UR applied voltage) | GB 10190, IEC60384-16 |
| Characteristics Dependent on Temperature | Capacitance change at -40: 0(Cb-Cd)/Cd+3%; Capacitance change at +105: -4.0%(Cf-Cd)/Cd0 | GB 10190, IEC60384-16 |
| Charge/Discharge Test | Capacitance change C/C 5%; DF increase 0.005; Insulation Resistance IR/IR 50% (10,000 cycles) | GB 10190, IEC60384-16 |
| Soldering Rules (Wave Soldering) | TP 110/120s; Ts 120/45s; Peak time < 4s (for P7.5mm, T4mm) | |
| Soldering Rules (Soldering Iron) | Tip temperature 350, time 3 seconds | |
