| Sign In | Join Free | My infospaceinc.com |
|
Impedance : 50Ω
Frequency - Center : 5.235GHz
Description : 50Ω 5.235GHz SMD-3P,8.6x5mm Ceramic Filters RoHS
Mfr. Part # : ECS-DCF-101
Model Number : ECS-DCF-101
Package : SMD-3P,8.6x5mm
The ECS-DCF-101 is a dielectric ceramic filter designed for various electronic applications. It features a compact, surface-mount (SMD) monoblock construction and conforms to RoHS directive and national environmental protection laws.
| Item | Requirement | Unit | Notes |
|---|---|---|---|
| ELECTRICAL SPECIFICATIONS | |||
| Center frequency | 5235 | MHz | |
| Bandwidth [BW] | 5150-5330 | MHz | |
| Insertion Loss in BW | 2.5 | dB max | |
| Ripple in BW | 1.3 | dB max | |
| Return loss. in BW | 10 | dB min | |
| Attenuation[Absolute Value] | 50.0 | dB min | @ 5490-5850MHz |
| Input Power | 1 | W max. | |
| In/Out Impedance | 50 | ohm | |
| RATING | |||
| Withstand DC Voltage | 50 | V (1min max) | |
| Insulation Resistance | 100 | M min. | (10V, 1min5s) |
| Storage temperature | -40 to 85 | C | |
| Operation Temperature Range | -40 to +85 | C | |
| ENVIRONMENTAL TESTS (Post-Test Characteristics) | |||
| Humidity Test | Insertion Loss Change: 0.3 dB max, Ripple: 0.3 dB max, Attenuation Change: 2.0 dB min | Referenced to initial measurements | |
| High Temperature Exposure | Insertion Loss Change: 0.3 dB max, Ripple: 0.3 dB max, Attenuation Change: 2.0 dB min | Referenced to initial measurements | |
| Low Temperature | Insertion Loss Change: 0.3 dB max, Ripple: 0.3 dB max, Attenuation Change: 2.0 dB min | Referenced to initial measurements | |
| Temperature Cycle | Insertion Loss Change: 0.3 dB max, Ripple: 0.3 dB max, Attenuation Change: 2.0 dB min | Referenced to initial measurements | |
| Vibration | Insertion Loss Change: 0.3 dB max, Ripple: 0.3 dB max, Attenuation Change: 2.0 dB min | Referenced to initial measurements | |
| Soldering Test | Mechanical damage shall not occur. | Preheating 120C~150C for 60s, Dipping 260C5C for 101s | |
| Solder Ability | Terminals shall be at least 95% covered by solder. | Dipped in 250C5C solder bath for 3s0.5s with rosin flux | |
| Terminal Pressure Strength | Mechanical damage such as breaks shall not occur. | Apply 5N of force for 10s1s in the direction of the arrow after soldering to test PCB | |
|
|
Dielectric ceramic filter ECS ECS-DCF-101 featuring compact SMD monoblock design and RoHS compliance Images |