Home > Ceramic Filters >

Mini-Circuits BFCG-252 LTCC Band Pass Filter Designed for Dense PCB Layouts and Wireless Applications

Product Categories

Crystals [3000]
Delay Lines [5]
Aluminum - Polymer Capacitors [1170]
Aluminum Electrolytic Capacitors [3000]
Oscillators [539]
Thumbwheel Potentiometers [25]
Chassis Mount Resistors [135]
Chip Resistor - Surface Mount [2074]
Capacitor Kits [6]
Resistor Kits [17]
Cable Ferrites [84]
Common Mode Chokes [1585]
Arrays, Signal Transformers [34]
Value Display Potentiometers [4]
Ferrite Beads and Chips [1587]
Wireless Charging Coils [34]
Current Sense Resistors [126]
Power Line Filter Modules [49]
Capacitor Networks, Arrays [24]
Electric Double Layer Capacitors (EDLC), Supercapacitors [3]
EMI/RFI Filters (LC, RC Networks) [154]
Ceramic Capacitors [3000]
Film Capacitors [843]
Resistor Networks, Arrays [637]
Pin Configurable/Selectable Oscillators [13]
Stand Alone Programmers [1]
Fixed Inductors [3000]
Silicon Capacitors [2]
Ceramic Filters [216]
Adjustable Power Resistor [64]
Rotary Potentiometers, Rheostats [235]
Trimmer Potentiometers [1622]
Specialized Resistors [144]
VCOs (Voltage Controlled Oscillators) [81]
Through Hole Resistors [711]
Resonators [79]
Ferrite Cores [96]
Feed Through Capacitors [134]
Slide Potentiometers [123]
Tantalum - Polymer Capacitors [175]
Tantalum Capacitors [143]
RF Filters [231]
Motor Start, Motor Run Capacitors (AC) [29]
Thin Film Capacitors [999]
Programmable Oscillators [242]
Trimmers, Variable Capacitors [10]
SAW Filters [201]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Mini-Circuits BFCG-252 LTCC Band Pass Filter Designed for Dense PCB Layouts and Wireless Applications

Impedance : 50Ω

Insertion Loss : 1.7dB

Type of Filter : Bandpass Filter

Bandwidth : 2400MHz~2500MHz

Frequency - Center : 2.45GHz

Description : 50Ω 1.7dB 2400MHz~2500MHz 2.45GHz SMD-4P,2x1.2mm Ceramic Filters RoHS

Mfr. Part # : BFCG-252+

Model Number : BFCG-252+

Package : SMD-4P,2x1.2mm

Contact Now

Product Overview

Mini-Circuits BFCG-252+ is a LTCC band pass filter designed for the 2400 to 2500 MHz frequency range, suitable for various applications including ISM Band, WLAN, Bluetooth, and Zigbee. It features a rugged, ceramic construction in a tiny 0805 form factor (0.079" x 0.049" x 0.037"), offering good power handling and minimal performance variation due to parasitics. This filter provides excellent stopband rejection and a typical passband insertion loss of 1.7 dB. It operates within a wide temperature range of -55 to +125C and is ideal for dense PCB layouts.

Product Attributes

Brand: Mini-Circuits
Material: Ceramic
Construction: LTCC
Certifications: +RoHS Compliant
Case Style: GE0805C-3
Product Marking: N/A

Technical Specifications

Parameter	Frequency (MHz)	Min.	Typ.	Max.	Unit	Notes
Pass Band Center Frequency			2450		dB
Insertion Loss (Pass Band)	2400 - 2500		1.7	3.5	dB	1
Return Loss (Pass Band)	2400 - 2500		10		dB	1
Stop Band, Lower Insertion Loss	10 - 1350	25	35		dB
Stop Band, Upper Insertion Loss	3400 - 3800	23	27		dB
Stop Band, Upper Insertion Loss	3800 - 7000	30	36		dB
Stop Band, Upper Insertion Loss	7000 - 8000	27	36		dB
Operating Temperature		-55		125	C
Storage Temperature		-55		125	C	3
RF Power Input				2	W	4

Outline Dimensions

Pad	A (inch)	A (mm)	B (inch)	B (mm)	C (inch)	C (mm)	D (inch)	D (mm)	E (inch)	E (mm)	F (inch)	F (mm)	Q (inch)	Q (mm)	wt (grams)
BFCG-252+	.079	2.01	.049	1.24	.037	0.94	.014	0.36	.051	1.30	.010	0.25	.012	0.30	.020

Pad Connections

INPUT: 1, OUTPUT: 3, GROUND: 2,4

Notes

1. Tested on Evaluation Board TB-BFCG-252+.
2. This Filter is not intended for use as DC Blocking circuits element. In Application where DC Voltage is present at either input or output ports, blocking capacitors are required at the corresponding RF ports.
3. Refer to product storage temperature after installation. Suggestion for T&R unused product storage condition +5 - +35C. Humidity 45-75% RH, 12 month Max.
4. Derate linearly to 0.5W@125C. Permanent damage may occur if any of these limits exceeded.
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp

2412232011_Mini-Circuits-BFCG-252-_C5440945.pdf

Quality Mini-Circuits BFCG-252 LTCC Band Pass Filter Designed for Dense PCB Layouts and Wireless Applications for sale

Mini-Circuits BFCG-252 LTCC Band Pass Filter Designed for Dense PCB Layouts and Wireless Applications Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!