Home > Aluminum - Polymer Capacitors >

Surface Mount Conductive Polymer Aluminum Solid Capacitor with High Ripple Current NCC APXG250ARA560MF61G and Low ESR

Product Categories

Fixed Inductors [2693]
RF Filters [248]
Oscillators [540]
Crystals [2945]
Rotary Potentiometers, Rheostats [234]
Programmable Oscillators [242]
Ceramic Filters [216]
Delay Lines [5]
Aluminum Electrolytic Capacitors [2799]
Trimmer Potentiometers [1587]
Aluminum - Polymer Capacitors [1040]
Thumbwheel Potentiometers [25]
Common Mode Chokes [1562]
Chassis Mount Resistors [135]
Chip Resistor - Surface Mount [1995]
Capacitor Kits [6]
Resistor Kits [17]
Cable Ferrites [83]
EMI/RFI Filters (LC, RC Networks) [152]
Ferrite Beads and Chips [1587]
Arrays, Signal Transformers [34]
Value Display Potentiometers [4]
Resistor Networks, Arrays [593]
Through Hole Resistors [711]
Wireless Charging Coils [34]
Film Capacitors [835]
Thin Film Capacitors [914]
Ceramic Capacitors [2764]
Tantalum Capacitors [134]
Current Sense Resistors [124]
Power Line Filter Modules [49]
Resonators [79]
Capacitor Networks, Arrays [24]
Electric Double Layer Capacitors (EDLC), Supercapacitors [3]
Pin Configurable/Selectable Oscillators [13]
Silicon Capacitors [2]
Adjustable Power Resistor [64]
Specialized Resistors [144]
VCOs (Voltage Controlled Oscillators) [81]
Trimmers, Variable Capacitors [9]
Ferrite Cores [96]
Feed Through Capacitors [134]
Slide Potentiometers [123]
Motor Start, Motor Run Capacitors (AC) [29]
SAW Filters [201]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Surface Mount Conductive Polymer Aluminum Solid Capacitor with High Ripple Current NCC APXG250ARA560MF61G and Low ESR

Voltage Rating : 25V

Capacitance : 56uF

Lifetime : 15000hrs@105℃

Tolerance : ±20%

Pin Spacing : -

Equivalent Series Resistance(ESR) : 30mΩ

Height - Seated (Max) : 5.8mm

Operating Temperature : -55℃~+105℃

Ripple Current : 2.8A@100kHz

Diameter : 6.3mm

Description : 56uF ±20% 25V Aluminum - Polymer Capacitors SMD,D6.3xL5.8mm 15000hrs@105℃

Mfr. Part # : APXG250ARA560MF61G

Model Number : APXG250ARA560MF61G

Package : SMD,D6.3xL5.8mm

Contact Now

Product Overview

The NPCAP-PXG Series are surface mount conductive polymer aluminum solid capacitors designed for high-performance applications. These capacitors offer super low ESR and high ripple current capability, making them ideal for demanding electronic circuits. They are solvent resistant, RoHS2 compliant, and halogen-free. The series features a rated voltage range of 16 to 25Vdc and a capacitance range from 10 to 1,000F, available in various case sizes from 54.5L to 1012.2L. These capacitors are suitable for applications requiring reliable performance under challenging environmental conditions, as evidenced by their endurance and bias humidity ratings.

Product Attributes

Series: NPCAP-PXG
Type: Conductive Polymer Aluminum Solid Capacitors
Mounting: Surface Mount
Features: Super low ESR, High ripple current capability, Solvent resistant type, RoHS2 Compliant, Halogen Free
Origin: Not specified
Material: Not specified
Color: Not specified

Technical Specifications

Item	Characteristics
Category Temperature Range	-55 to +105
Rated Voltage Range	16 to 25Vdc
Capacitance Tolerance	20% (M) (at 20, 120Hz)
Leakage Current	Shall not exceed values shown in STANDARD RATINGS. (at 20 after 2 minutes)
Dissipation Factor (tan)	0.12 max. (at 20, 120Hz)
Low Temperature Characteristics (Max. Impedance Ratio)	Z(-25)/Z(+20)1.15, Z(-55)/Z(+20)1.25 (at 100kHz)
Endurance	Satisfied when restored to 20 after rated voltage applied for 15,000 hours (E46,F45 : 3,000 hours) at 105. Capacitance change 20%, D.F. (tan) 150% of initial, ESR 150% of initial, Leakage current initial.
Bias Humidity	Satisfied when restored to 20 after subjected to DC rated voltage at 60, 90 to 95% RH for 1,000 hours (E46,F45 : 500 hours). Capacitance change 20%, D.F. (tan) 150% of initial, ESR 150% of initial, Leakage current initial.
Surge Voltage	Subjected to 1,000 cycles each consisting of charge with specified surge voltage at 105 for 30 seconds (R=1k) and discharge for 5 minutes 30 seconds. Appearance, Capacitance change 20%, D.F. (tan) 150% of initial, ESR 150% of initial, Leakage current initial.
Soldering Heat	Satisfied after soldering under recommended conditions. Appearance, Capacitance value within tolerance, D.F. (tan) initial, ESR initial, Leakage current initial.
Failure Rate	0.5% per 1,000 hours maximum (Confidence level 60% at 105)

Dimensions [mm]

Size Code	D 0.5	L 0.3 (Note)	A 0.2	B 0.2	C 0.2	W (0.5 to 0.8)	P
E46	5	4.5 (L+0.1/-0.2)	5.3	5.3	5.9	0.5 to 0.8	1.4
F45	6.3	4.4 (L+0.1/-0.2)	6.6	6.6	7.2	0.5 to 0.8	1.9
E61	5	5.8 0.5	5.3	5.3	5.9	0.5 to 0.8	1.4
F61	6.3	6.3 0.5	6.6	6.6	7.2	0.5 to 0.8	1.9
JA0	10	10.0 0.5	10.3	10.3	11.0	0.7 to 1.1	4.5
JC0	10	12.2 0.5	10.3	10.3	11.0	0.7 to 1.1	4.5
HA0	8	10.0 0.5	8.3	8.3	9.0	0.7 to 1.1	3.1
H80	8	7.7 0.5	8.3	8.3	9.0	0.7 to 1.1	3.1
H70	8	6.7 0.5	8.3	8.3	9.0	0.7 to 1.1	3.1
F80	6.3	7.7 0.5	6.6	6.6	7.2	0.5 to 0.8	1.9

Standard Ratings

WV (Vdc)	Cap (F)	Size code	Leakage current (A max./after 2min.)	ESR (m max./20, 100k to 300kHz)	Rated ripple current (mArms/105, 100kHz)	Part No.
16	39	E46	312	50	1,860	APXG160ARA390ME46G
16	68	F45	544	40	2,450	APXG160ARA680MF45G
16	100	E61	320	27	3,000	APXG160ARA101ME61G
16	180	F61	576	22	3,300	APXG160ARA181MF61G
16	220	F80	704	22	3,300	APXG160ARA221MF80G
16	270	H70	864	22	3,300	APXG160ARA271MH70G
16	330	H70	1,050	22	3,300	APXG160ARA331MH70G
16	330	H80	1,050	21	3,400	APXG160ARA331MH80G
16	330	HA0	1,050	21	3,400	APXG160ARA331MHA0G
16	560	HA0	1,790	18	3,900	APXG160ARA561MHA0G
16	560	J80	1,790	20	3,800	APXG160ARA561MJ80G
16	820	JA0	2,620	16	4,200	APXG160ARA821MJA0G
16	820	JC0	2,620	12	5,400	APXG160ARA821MJC0G
16	1,000	JA0	3,200	18	4,100	APXG160ARA102MJA0G
16	1,000	JC0	3,200	12	5,400	APXG160ARA102MJC0G
20	27	E46	270	55	1,770	APXG200ARA270ME46G
20	47	E61	188	30	2,800	APXG200ARA470ME61G
20	47	F45	470	42	2,400	APXG200ARA470MF45G
20	56	E61	224	30	2,800	APXG200ARA560ME61G
20	120	F61	480	25	3,200	APXG200ARA121MF61G
20	150	F80	600	25	3,200	APXG200ARA151MF80G
20	180	H70	720	25	3,200	APXG200ARA181MH70G
20	220	H80	880	23	3,300	APXG200ARA221MH80G
20	220	HA0	880	23	3,400	APXG200ARA221MHA0G
20	390	HA0	1,560	20	3,700	APXG200ARA391MHA0G
20	390	J80	1,560	22	3,650	APXG200ARA391MJ80G
20	560	JA0	2,240	18	4,100	APXG200ARA561MJA0G
25	10	E46	125	60	1,700	APXG250ARA100ME46G
25	22	E61	110	40	2,450	APXG250ARA220ME61G
25	22	F45	275	45	2,350	APXG250ARA220MF45G
25	27	E61	135	40	2,450	APXG250ARA270ME61G
25	39	F61	195	30	2,800	APXG250ARA390MF61G
25	47	F61	235	30	2,800	APXG250ARA470MF61G
25	56	F61	280	30	2,800	APXG250ARA560MF61G
25	56	F80	280	28	2,800	APXG250ARA560MF80G
25	68	H70	340	28	3,000	APXG250ARA680MH70G
25	82	H80	410	26	3,100	APXG250ARA820MH80G
25	100	HA0	500	24	3,300	APXG250ARA101MHA0G
25	120	HA0	600	22	3,500	APXG250ARA121MHA0G
25	150	J80	750	25	3,400	APXG250ARA151MJ80G
25	220	JA0	1,100	20	3,800	APXG250ARA221MJA0G

Rated Ripple Current Multipliers

FrequencyHz	Multiplier
120	0.05
1k	0.30
10k	0.55
50k	0.70
100k to 500k SMD type	1.00

Note: Product specifications are subject to change without notice. Request product specifications before purchase and/or use. Use products based on the information contained in this catalog and product specifications.

2410010232_NCC-APXG250ARA560MF61G_C709469.pdf

Quality Surface Mount Conductive Polymer Aluminum Solid Capacitor with High Ripple Current NCC APXG250ARA560MF61G and Low ESR for sale

Surface Mount Conductive Polymer Aluminum Solid Capacitor with High Ripple Current NCC APXG250ARA560MF61G and Low ESR Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!