| Sign In | Join Free | My infospaceinc.com |
|
Voltage Rating : 16V
Capacitance : 180uF
Lifetime : 15000hrs@105℃
Tolerance : ±20%
Pin Spacing : -
Equivalent Series Resistance(ESR) : 26mΩ
Height - Seated (Max) : 7.7mm
Operating Temperature : -55℃~+105℃
Ripple Current : 3.43A@100kHz
Diameter : 10mm
Description : 180uF ±20% 16V Aluminum - Polymer Capacitors SMD,D10xL7.7mm 15000hrs@105℃
Mfr. Part # : APXA160ARA181MJ80G
Model Number : APXA160ARA181MJ80G
Package : SMD,D10xL7.7mm
The NPCAP-PXA Series are surface mount conductive polymer aluminum solid capacitors offering super low ESR, impedance, and high heat resistance due to their conductive polymer electrolyte. These capacitors are designed for DC-DC converters, voltage regulators, and decoupling applications, commonly found on computer motherboards. They are solvent-resistant, RoHS2 compliant, and Halogen Free.
| Category | Specification |
|---|---|
| Category Temperature Range | -55 to +105 |
| Rated Voltage Range | 2.5 to 25Vdc |
| Case Size Range | 55.8L to 1012.2L |
| Capacitance Tolerance | 20% (M) (at 20, 120Hz) |
| Dissipation Factor (tan) | 0.12 max. (at 20, 120Hz) |
| Low Temperature Characteristics (Max. Impedance Ratio) | Z(-25)/Z(+20)1.15, Z(-55)/Z(+20)1.25 (at 100kHz) |
| Endurance | Satisfied after 15,000 hours (F46 : 3,000 hours) at 105 with rated voltage applied. Capacitance change 20%, D.F. (tan) 150% of initial, ESR 150% of initial, Leakage current initial specified value. |
| Bias Humidity | Satisfied after 1,000 hours (F46 : 500 hours) at 60, 90-95% RH with rated DC voltage. Capacitance change 20%, D.F. (tan) 150% of initial, ESR 150% of initial, Leakage current initial specified value. |
| Surge Voltage | Subjected to 1,000 cycles at 105 for 30 seconds charge and 5 minutes 30 seconds discharge. Surge voltages vary by rated voltage (e.g., 2.5Vdc rated has 2.9Vdc surge). |
| Soldering Heat | Appearance, Capacitance value, D.F. (tan), ESR, Leakage current must meet specified values after soldering under recommended conditions. |
| Size Code | D 0.5 | L 0.3 (Note) | A 0.2 | B 0.2 | C 0.2 | W | P |
|---|---|---|---|---|---|---|---|
| E61 | 5 | 5.8 | 5.3 | 5.3 | 5.9 | 0.5 to 0.8 | 1.4 |
| F46 | 6.3 | 4.5 | 6.6 | 6.6 | 7.2 | 0.5 to 0.8 | 1.9 |
| F61 | 6.3 | 5.8 | 6.6 | 6.6 | 7.2 | 0.5 to 0.8 | 1.9 |
| H70 | 8 | 6.7 | 8.3 | 8.3 | 9.0 | 0.7 to 1.1 | 3.1 |
| HC0 | 8 | 12.0 | 8.3 | 8.3 | 9.0 | 0.7 to 1.1 | 3.1 |
| J80 | 10 | 7.7 | 10.3 | 10.3 | 11.0 | 0.7 to 1.1 | 4.5 |
| JC0 | 10 | 12.2 | 10.3 | 10.3 | 11.0 | 0.7 to 1.1 | 4.5 |
Note: L0.5 for F46; L+0.1 -0.2 for HC0 and JC0.
(Partial listing for illustration)
| WV (Vdc) | Cap (F) | Size code | Leakage current (A max./ after 2 min.) | ESR (m max./ 20, 100k to 300kHz) | Rated ripple current (mArms/105, 100kHz) | Part No. |
|---|---|---|---|---|---|---|
| 2.5 | 220 | F61 | 110 | 25 | 2,500 | APXA2R5ARA221MF61G |
| 4.0 | 100 | F61 | 80.0 | 26 | 2,450 | APXA4R0ARA101MF61G |
| 6.3 | 47 | E61 | 59.2 | 35 | 1,380 | APXA6R3ARA470ME61G |
| 10 | 33 | E61 | 66.0 | 40 | 1,270 | APXA100ARA330ME61G |
| 16 | 22 | E61 | 70.4 | 45 | 1,210 | APXA160ARA220ME61G |
| 20 | 15 | F46 | 150 | 57 | 1,300 | APXA200ARA150MF46G |
| 23 | 15 | F46 | 172 | 57 | 1,300 | APXA230ARA150MF46G |
| 25 | 10 | F61 | 125 | 65 | 1,500 | APXA250ARA100MF61G |
| FrequencyHz | SMD type |
|---|---|
| 120 | 0.05 |
| 1k | 0.30 |
| 10k | 0.55 |
| 50k | 0.70 |
| 100k to 500k | 1.00 |
(Refer to "Product code guide (conductive polymer type)" for details)
| Part Number Segment | Description |
|---|---|
| Series code | PXA |
| Category | A |
| Supplement code | (e.g., Lower ESR PXA PXE) |
| Size code | (e.g., E61, F46, F61, H70, HC0, J80, JC0) |
| Capacitance code | (ex. 10F:100, 100F:101) |
| Voltage code | (ex. 6.3V:6R3, 10V:100) |
| Capacitance tolerance code | (e.g., M for 20%) |
| Taping code | (e.g., G) |
| Terminal code | (e.g., A) |
|
|
Surface mount conductive polymer aluminum solid capacitor NCC APXA160ARA181MJ80G with low ESR and high heat resistance Images |