X-CON BRAND CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
This specification applies to conductive polymer aluminum solid capacitors used in electronic equipment. These capacitors offer advanced performance characteristics suitable for various electronic applications.
Product Attributes
- Brand: X-CON
- Series: ULR
- Type: Conductive Polymer Aluminum Solid Capacitors
- Origin: SAMXON ELECTRONIC COMPONENTS LIMITED
- Issued Date: 2015-11-04
- Version: 01
Technical Specifications
| Model | Rated Voltage (WV) | Surge Voltage (SV) | Nominal Capacitance (F) | Capacitance Tolerance | Leakage Current (max.) | Tangent of Loss Angle (tan) (max.) | ESR (m) (max.) | Operating Temperature Range | Load Life Test | Damp Heat Test | Max. Permissible Ripple Current (A) |
| ULR 10V560F (8x8) | 10 V.DC | 11.5 V.DC | 560 | -20% ~ +20% | See Table 3 | 0.10 (at 10V) | See Table 3 | -55C to 105C | 2000 hours at 105C with rated voltage | 1000 hours at 60C, 90-95% RH | See Table 3 (at 100kHz) |
Note: Specific values for Leakage Current, ESR, and Maximum Permissible Ripple Current are detailed in 'Table 3' which is not fully provided in the source text but referenced for specific parameters.
Construction
Single-ended type with tinned copper or CP line terminals, aluminum anode and cathode foil, electrolyte paper, and an aluminum case sealed with rubber.
Key Performance Characteristics
- Temperature Characteristic: Impedance ratio (Z-55/Z20, Z105/Z20) 1.25, Capacitance change (C/C 20) within 5%, tan within specified limits.
- Load Life Test Criteria: Capacitance change within 20%, tan 1.5x initial, ESR 1.5x initial, Leakage current initial value, no notable appearance changes.
- Surge Test Criteria: Capacitance change within 20%, tan 1.5x initial, ESR 1.5x initial, Leakage current initial value.
- Damp Heat Test Criteria: Capacitance change within 20%, tan 1.5x initial, ESR 1.5x initial, Leakage current initial value, no notable appearance changes.
- Rapid Change of Temperature Criteria: Capacitance change within 10%, tan specified value, Leakage current specified value (after voltage treatment).
- Lead Strength: Tested for pull and bending with specified load forces, with performance criteria for leakage current and appearance.
Product Marking
Details regarding product marking are available on page 12 of the specification sheet.
Application Guideline
Provides guidance on circuit design, voltage, sudden charge/discharge restrictions, ripple current, leakage current, failure rate, capacitor insulation, and general precautions for using capacitors.
Long Term Storage & Mounting Precautions
Guidelines for long-term storage and mounting are provided on page 15.
Environment-related Substances
A list of controlled substances is available on page 16.
2411220220_Man-Yue-Tech-ULR567M1AF08RR_C840083.pdf
|
|
Performance Conductive Polymer Aluminum Solid Capacitors Man Yue Tech ULR567M1AF08RR for Electronics Images
|
