Conductive Polymer Aluminum Electrolytic Capacitor BERYL Electronic Tech CH016M681PT6.3*14L-1A42R5TG3R for Operation

Product Overview

The Beryl CH Series Conductive Polymer Aluminum Electrolytic Capacitor offers a robust solution for various electronic applications. Designed for reliability and performance, this capacitor series features a conductive polymer solid aluminum construction, ensuring stable operation across a wide temperature range. It is suitable for applications requiring high capacitance and stable electrical characteristics, with specific attention to solderability and operational precautions for optimal longevity and performance.

Product Attributes

• Brand: Beryl
• Series: CH
• Product Type: Conductive Polymer Aluminum Electrolytic Capacitor
• Origin: Zhaoqing Beryl Electronic Technology Co., Ltd., China
• Marking: Blue Printing

Technical Specifications

Product Dimensions (mm)

Marking

• Trademark
• Date code (e.g., 432)
• Nominal capacitance (680)
• Series (CH)
• Working voltage (16V)
• Cathode marked

Electrical Characteristics Summary

• Operating Temperature Range: Ambient temperature at which the capacitor can be operated continuously at rated voltage.
• Measurement Conditions: Ambient temperature 15 to 35, Air pressure 86kpa to 106kpa. For precise results: Ambient temperature 202, Air pressure 86kpa to 106kpa.
• Capacitance Measurement: Frequency 120Hz, Voltage 0.5Vrms or less, DC bias voltage +1.5~2.0VDC.
• ESR Measurement: Frequency 100kHz, Temperature 20 2.
• Leakage Current Measurement: Measured after 2 minutes application of DC rated working voltage through a 1000 resistor at 20.

Endurance Performance Summary

• Load Life Test: At 125 2, DC rated working voltage for 2000 hours. Capacitance change within 20%, DF 150% of initial specified value, ESR 150% of initial specified value, Leakage current initial specified value. Appearance: No significant damage.
• Storage at High Temperature: Stored at maximum operating temperature for 1000 hours without voltage. Leakage current specified value, Capacitance change within 20% of initial value, tan 150% of initial specified value, ESR 150% of initial specified value.
• Resistance to Vibration: Complies with JIS C 5102 8.2 and JIS C 5025. Frequency 10 to 55Hz, Amplitude 0.75mm, 3 axes (X, Y, Z) for 2 hours/axial. Capacitance change within 5% of initial value.
• Solder Ability: Temperature 235 5 C, Duration 2 0.5 seconds. At least 95% of surface area of the dipped portion of the terminal shall be covered with new solder.
• Resistance to Soldering Heat: Solder bath method: 260 5C for 101 seconds. Soldering iron method: 400 10 C for 3+1/-0 seconds. Capacitance change within 5% of initial value, tan 130% of initial specified value, ESR 130% of initial specified value, Leakage current initial specified value.
• Resistance to Damp Heat (steady state): 602, 90% ~ 95% RH for 1000 (-0/+48) hrs, without load. Capacitance change within 20% of initial value, tan 150% of initial specified value, ESR 150% of initial specified value, Leakage current initial specified value.
• Rapid Change of Temperature: Without load, 5 cycles. Capacitance change within 10% of initial capacitance, tan initial specified value, Leakage current initial specified value.
• Surge Voltage: Surge voltage (rated voltage 1.15) applied for 1000 cycles. Capacitance change within 20% of initial value, tan 150% of initial specified value, ESR 150% of initial specified value, Leakage current specified value.
• Terminal Strength: Tensile strength and bending strength specified by lead wire diameter and force (N).

Soldering Conditions

• Reflow Soldering (SMD or high-temp DIP): Preheat (150200, max 180s), Duration at 230 (max 60s), Highest Temperature 250~260 (max 5s). Number of reflow: 1 or 2.
• Soldering with Ferrochromium: Max temperature 350 5, Welding time 3 +1 / -0 seconds.

Operating Precautions

• Polarity: Do not reverse polarity; it can shorten lifespan due to increasing leakage current or short circuit.
• Prohibited Circuits: Avoid use in high impedance, coupling, time constant, series connection for higher withstand voltage, or circuits sensitive to leakage current fluctuations.
• Over voltage: Do not exceed rated voltage, even momentarily, to prevent short circuits.
• Rapid Charge/Discharge: Unsuitable if instantaneous current exceeds 10A or 10 times allowable ripple current. A protection circuit is recommended.
• Soldering Considerations: Adhere to specified conditions to prevent leakage current increase and capacitance reduction. Do not reuse assembled or energized capacitors. Leakage current may increase after one year of storage; pre-condition if necessary. Radial lead type capacitors are not suitable for reflow soldering unless confirmed. Handle with care after soldering to avoid mechanical damage.
• Storage: Store between 5-35 (or 35-85 for <3 months), <75% RH, away from direct sunlight, water, salt, oil, condensation, toxic gases, UV, or radioactive rays. Shelf life varies by packaging type (e.g., 36 months before unpacking for radial lead type in plastic bag).
• Cleaning: Compatible with HCFC, higher alcohol system, petroleum system, terpene system, water system with surface active agent. Consult manufacturer for specific methods (soak, ultrasonic, boil, vapor).

Manufacturing Process Notice

• Does not use RoHS specified substances.
• RoHS substance usage must be clarified in delivery specifications.
• Plastic parts should be marked with material symbols where feasible.
• Molding resins, inks, paints, and wire rods must be purchased from Green Partner certified vendors.

Packing Information

• Packing Label: Includes customer order number, customer P/N, factory P/N, capacity, voltage, size, quantity, QC stamp, and lot number (Year, Month, Date, Production Serial Number).
• Bulk Packing: Standard and cut-lead options available with specified quantities per bag, inner box, and outer carton based on case size (D*L mm).
• Taped Packing: Available with specified quantities per inner box and outer carton based on case size (D*L mm).

Conductive Polymer Aluminum Electrolytic Capacitor BERYL Electronic Tech CH016M681PT6.3*14L-1A42R5TG3R for Operation Images