Home > Aluminum - Polymer Capacitors >

Electrolytic Solid Capacitor Econd PH102M035G170B000 1000uF 35V 10x17mm Durable Electronic Component

Product Categories

Fixed Inductors [2693]
RF Filters [248]
Oscillators [540]
Crystals [2945]
Rotary Potentiometers, Rheostats [234]
Programmable Oscillators [242]
Ceramic Filters [216]
Delay Lines [5]
Aluminum Electrolytic Capacitors [2799]
Trimmer Potentiometers [1587]
Aluminum - Polymer Capacitors [1039]
Thumbwheel Potentiometers [25]
Common Mode Chokes [1562]
Chassis Mount Resistors [135]
Chip Resistor - Surface Mount [1995]
Capacitor Kits [6]
Resistor Kits [17]
Cable Ferrites [83]
EMI/RFI Filters (LC, RC Networks) [152]
Ferrite Beads and Chips [1587]
Arrays, Signal Transformers [34]
Value Display Potentiometers [4]
Resistor Networks, Arrays [593]
Through Hole Resistors [711]
Wireless Charging Coils [34]
Film Capacitors [835]
Thin Film Capacitors [914]
Ceramic Capacitors [2764]
Tantalum Capacitors [134]
Current Sense Resistors [124]
Power Line Filter Modules [49]
Resonators [79]
Capacitor Networks, Arrays [24]
Electric Double Layer Capacitors (EDLC), Supercapacitors [3]
Pin Configurable/Selectable Oscillators [13]
Silicon Capacitors [2]
Adjustable Power Resistor [64]
Specialized Resistors [144]
VCOs (Voltage Controlled Oscillators) [81]
Trimmers, Variable Capacitors [9]
Ferrite Cores [96]
Feed Through Capacitors [134]
Slide Potentiometers [123]
Motor Start, Motor Run Capacitors (AC) [29]
SAW Filters [201]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Electrolytic Solid Capacitor Econd PH102M035G170B000 1000uF 35V 10x17mm Durable Electronic Component

Voltage Rating : 35V

Capacitance : 1000uF

Lifetime : 2000hrs@105℃

Tolerance : ±20%

Pin Spacing : 5mm

Equivalent Series Resistance(ESR) : 20mΩ

Height - Seated (Max) : 17mm

Operating Temperature : -55℃~+105℃

Diameter : 10mm

Ripple Current : 5.5A@100kHz

Description : 35V 1000uF ±20% 20mΩ 5.5A@100kHz Through Hole,D10xL17mm Aluminum - Polymer Capacitors RoHS

Mfr. Part # : PH102M035G170B000

Model Number : PH102M035G170B000

Package : Through Hole,D10xL17mm

Contact Now

Product Overview

This document specifies the PH series of electrolytic capacitors manufactured by Hubei Milangxingchuang Electronics Co., Ltd. These capacitors are designed for various electronic applications and offer reliable performance with a focus on quality and durability.

Product Attributes

Brand: Milang Xingchuang
Origin: Hubei, China
Certifications: ROHS2.0, REACH, HF (Free of restricted environmental substances)
Sleeve Color: Red

Technical Specifications

Item	Specification	Details
Product Name	Solid Capacitor	PH 1000uF35V 10x17
Vendor P/N	PH102M035G170B000
Customer P/N
Customer Name
Issue Date	2025/9/4
Dimensions (mm)	D	10 0.5
	L	17 1.0
	F	5.0 0.5
	d	0.6 0.05
Series	PH
Nominal Capacitance	1000 uF	Tolerance: -20% ~ +20%
Rated Voltage	35.0 V
Size (DxL)	10.0 x 17.0 mm
Dissipation Factor (DF) @ 120Hz	Max 10%
Leakage Current (LC) @ 60s, 20	Max 7000.0 uA
Equivalent Series Resistance (ESR) @ 100KHz	Max 20 m
Ripple Current (R.C) @ 105, 100KHz	Max 5500 mA
Surge Voltage (SV)	40.3 V
Load Life @ 105	2000 Hrs
Operating Temperature	-55 ~ 105
Execution Standard	JISC 5101-4
Test Environment	Temperature: 202, Humidity: 65%5%
Multiplier for Ripple Current	Frequency (120F1K): 0.05; Frequency (1KF10K): 0.30; Frequency (10KF100K): 0.70; Frequency (100KF500K): 1.0
Marking	Rated Voltage, Capacitance, Series (PH), Polarity bar	Sleeve Color: Red
Material Table	Positive Foil: Al Foil(+); Negative Foil: Al Foil(-); Leader Pin: AlSn; Separator: Celluose; Rubber: Organic compounds; Case: Aluminum, Coated aluminum can	All materials meet ROHS2.0, REACH, HF requirements.
Test Item: Capacitance	Conditions: Test Frequency: 120Hz10Hz, Test Voltage: 0.5Vrms +1.0V.DC, Test Temperature: 202	Meets 2. Specification Table
Test Item: Dissipation Factor	Conditions: Test Frequency: 120Hz10Hz, Test Voltage: 0.5Vrms +1.0V.DC, Test Temperature: 202	Meets 2. Specification Table
Test Item: ESR	Conditions: Test Frequency: 100KHz10Hz, Test Voltage: 0.5Vrms +1.0V.DC, Test Temperature: 202	Meets 2. Specification Table
Test Item: Leakage Current	Conditions: Test Voltage: 35 V, Charging Time: 2min, Test Temperature: 202	LC SPEC: I0.2CVor 300A (whichever is greater)
Test Item: Resistance to Soldering Heat	Conditions: Solder bath temperature: 2605, Immersion duration: 101 sec, Solder composition: H60A/H60S/H63A, Flux: 25% rosin in alcohol, Immersion depth: 1.5~2.0mm	Criteria: No appearance defect, Capacitance change within 10%, DF/ESR/LC within specification.
Test Item: Solder Ability	Conditions: Solder bath temperature: 2452, Immersion duration: 20.5 sec, Solder composition: H60A/H60S/H63A, Flux: 25% rosin in alcohol, Immersion depth: 1.5~2.0mm	Criteria: Solder covers 95% of dipped lead area.
Test Item: Damp heat	Conditions: Temperature: 602, Relative humidity: 90% to 95%, Duration: 2408 hours	Criteria: No damage, Capacitance change within 20%, DF < 1.5x spec, LC < spec.
Test Item: Surge Voltage	Conditions: Apply surge voltage for 30s, discharge for 330s, repeat 1000 times.	Criteria: CAP change within 10%, DF/LC spec, No visible damage. Surge Voltage (SV) values provided for various UR.
Test Item: Vibration	Conditions: Frequency range: 10 Hz to 55 Hz, Amplitude: 0.75 mm, Total duration: 32h (X-Y-Z directions each for 2 hours)	Criteria: No visible damage or electrolyte leakage, CAP change within 5%.
Test Item: Terminal strength	Conditions: Specified tensile/bending load applied for 10 seconds.	Criteria: No electrical or mechanical damage.
Test Item: Load Life	Conditions: Test Temp: 105 2, Rated Voltage: 35 V, Test Time: 2000 (+72 -0) hours, followed by 16 hours at room temp.	Criteria: No appearance defect, CAP change within 20%, DF < 2x spec, LC < spec.
Test Item: Shelf Life	Conditions: Test Temp: 105 2, Test Time: 1000 (+72 -0) hours, followed by 16 hours at room temp.
Test Item: Maximum Applicable Ripple Current	Conditions: 105 2, frequency 100KHz or 120Hz, Peak voltage not to exceed rated DC voltage.
Test Item: Low temperature test	Conditions: Minimum operating temperature, 722 hours storage.	Criteria: CAP change within 10%, DF/ESR/LC spec.
Test Item: Rapid change of temperature	Conditions: Cycles of min temp (30min) and max temp (30min) with rapid transitions.	Criteria: CAP change within 20%, DF/LC spec.
Test Item: Flow soldering test	Conditions: Preheating 120 (<120s), Soldering 260 (10s, 2 times).	Criteria: CAP change within 10%, DF/LC/ESR spec.

2509221615_Econd-PH102M035G170B000_C51953328.pdf

Quality Electrolytic Solid Capacitor Econd PH102M035G170B000 1000uF 35V 10x17mm Durable Electronic Component for sale

Electrolytic Solid Capacitor Econd PH102M035G170B000 1000uF 35V 10x17mm Durable Electronic Component Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!