Solid Electrolyte Aluminum Electrolytic Capacitor (E-CAP)
This E-CAP series offers low ESR and high ripple current capabilities, designed for a load life of 2000 hours at 105. It is RoHS compliant and suitable for various electronic applications requiring reliable performance.
Product Attributes
- Brand: Hyncdz
- Series: E2 Series
- Type: (Lead Pin Type)
- Certifications: RoHS Compliant
- Color: (Red)
Technical Specifications
| Items | Characteristics |
| Category Temperture Range | -55 ~ +105 |
| Rated Voltage Range | 2.5 ~ 25V |
| Capacitance tolerance | 20%(M) (at 20,120Hz) |
| Leakage Current | I0.2CV 500A (at 20) |
| Dissipation Factor tan (Max.) | 0.08 (for 2.5V), 0.12 (for 4V to 25V) (at 20,120Hz) |
| Low Temperture Characteristics Z(-25)/Z(+20) | 1.25 (100KHz) |
| Low Temperture Characteristics Z(-55)/Z(+20) | 1.25 (Max.Impedance Ratio) |
| Endurence (105, 2000 hours) | Capacitance change 20%, D.F.(tan) 150%, ESR 150%, Leakage current Specified value |
| Damp Heat (Steady State) (60, 90%~95% RH, 1000 hours) | Capacitance change 20%, D.F.(tan) 150%, ESR 150%, Leakage current Specified value |
| Surge Voltage | Rated voltage 1.15(V) |
| Surge Voltage Test (105, 1000 cycles) | Capacitance change 20%, D.F.(tan) 150%, ESR 150%, Leakage current Specified value |
| Series | Capacitance (uF) | Capacitance Tolerance (%) | Rated Voltage (VDC) | Surge Voltage (VDC) | Dissipation Factor 120Hz/+20 (Max.) | Leakage Current 2min(uA) +20 | ESR 100KHz +20(m) | Ripple Current 100KHz (mArms) | Load Life (Hrs) | Diameter (mm) | Length (mm) | Pitch (mm) | Wire Diameter (mm) |
| E2 | 560 | 20 | 16 | 18.4 | 0.12 | 1792 | 18 | 3700 | 2000 | 6.3 | 12 | 2.5 | 0.6 |
| Part Number Component | Series | Nominal Capacitance | Voltage | Diameter () | Length (L) | Pitch (P) | Wire Diameter (d) | Color | Lead Forming Type | Tolerance | Temperature | Description |
| E2 | E2 | 560F (471) | 16V (016) | 6.3 (C) | 12 (12) | 2.5 (2.5) | 0.6 (0.6) | Red (H) | Lead Pin (Y) | 20% (M) | -55~+105 | 2000 hours life, standard plug-in type |
Dimensions (mm)
| D | 5 | 6.3 | 8 | 10 |
| P | 2.0 | 2.5 | 3.5 | 5.0 |
| d | 0.5 | 0.6 | 0.6 | 0.6 |
| (L16) | 1.0 | (16L22)1.5 | (L22)2.0 | |
Operating Precautions
Polarity: Do not reverse polarity to avoid shortened lifespan due to increased leakage current or short circuits.
Prohibited Circuits: Avoid use in high impedance, coupling, time constant, series connection for higher voltage, or circuits sensitive to large leakage current due to potential issues during soldering and other processes.
Over voltage: Do not exceed rated voltage, even momentarily, to prevent short circuits.
Sudden Charge and Discharge: Restricted for reliability. Use protection circuits if rush current exceeds 10A or 10x allowable ripple current. A 1k resistor is recommended for leakage current testing.
Operating Temperature and Ripple Current: Exceeding limits can shorten lifespan or increase leakage current, leading to failure.
Leakage Current: May slightly increase after soldering but self-repairs with DC voltage application.
Applied Voltage: Recommended to be less than 80% of rated voltage. Peak DC and AC voltage should not exceed rated voltage.
Marking
Each component or unit pack will be marked indelibly with series, trademark, capacitance, working voltage, and negative polarity indication.
