| Bending test | L : within10% | Specimen welded on substrate, apply pressure at approx. 0.5mm/s until substrate deformation reaches 3mm, hold for 305s. |
| Adhesion strength | L : within10% | Apply static load using a R0.5 pressing tool in the direction of the arrow to the specimen body and hold for 605s. Measure after removing pressure. |
| Vibration | L : within10% | Vibration of 1.5mm amplitude, sweep frequency 10~55~10Hz for 1h in each of X, Y, Z directions (total 3h). |
| Mechanical shock | L : within10% | Peak acceleration: 981 m/S, Duration of pulse: 6ms, 3 times in each of X, Y, Z axes. Specimen fixed on test board. |
| Free fall test | L : within10% | Specimen fixed on test board, equipped with 500g instruments, free fall from 1m height in each of three axes, 3 times each. |
| Solder ability | 90 or more of the area shall be covered. | Terminals immersed in flux for 5-10s, then dipped in solder bath at 2455 for 30.5s. |
| Resistance to soldering heat | L : within10% | Reflow soldering method: Preheat 150~180 for 9030s, Peak temp 260 (230min) for 3010s. Performed twice on 0.8mm thick glass epoxy resin test board. Measured after 1h stabilization at standard conditions. |
| Dielectric strength | Without damage. | 100V DC applied between terminal and core for 60s. |
| Insulation resistance | 100M or more | 100V DC applied between terminal and core. |
| Low temperature | L : within10% | Stored at -403 for 50012h, then stabilized for 1-2h at standard conditions before measurement. |
| Dry heat | L : within10% | Stored at 852 for 50012h, then stabilized for 1-2h at standard conditions before measurement. |
| Damp heat | L : within10% | Stored at 602, 90-95% RH for 50012h, then stabilized for 1-2h at standard conditions before measurement. |
| Temperature cycle | L : within10% | 500 cycles of -40 for 30 min and 85 for 30 min (transit time 2min). Stabilized for 1-2h at standard conditions before measurement. |
| Temperature drift | Inductance temperature coefficient 2000 ppm/ or less | Measured in the range of -25 to 85. |
| Operating temperature range | -40 ~ +125 | Includes product heating temperature. |
| Storage temperature range | -40 ~ +85 (or -40 ~ +60 in packing state) | In packing state. |
