Home > Fixed Inductors >

Technical electronic component GLE GCRH73-330MC providing detailed inductance and resistance data for engineering

Product Categories

Fixed Inductors [2693]
RF Filters [248]
Oscillators [540]
Crystals [2945]
Rotary Potentiometers, Rheostats [234]
Programmable Oscillators [242]
Ceramic Filters [216]
Delay Lines [5]
Aluminum Electrolytic Capacitors [2799]
Trimmer Potentiometers [1587]
Aluminum - Polymer Capacitors [1039]
Thumbwheel Potentiometers [25]
Common Mode Chokes [1562]
Chassis Mount Resistors [135]
Chip Resistor - Surface Mount [1995]
Capacitor Kits [6]
Resistor Kits [17]
Cable Ferrites [83]
EMI/RFI Filters (LC, RC Networks) [152]
Ferrite Beads and Chips [1587]
Arrays, Signal Transformers [34]
Value Display Potentiometers [4]
Resistor Networks, Arrays [593]
Through Hole Resistors [711]
Wireless Charging Coils [34]
Film Capacitors [835]
Thin Film Capacitors [914]
Ceramic Capacitors [2764]
Tantalum Capacitors [134]
Current Sense Resistors [124]
Power Line Filter Modules [49]
Resonators [79]
Capacitor Networks, Arrays [24]
Electric Double Layer Capacitors (EDLC), Supercapacitors [3]
Pin Configurable/Selectable Oscillators [13]
Silicon Capacitors [2]
Adjustable Power Resistor [64]
Specialized Resistors [144]
VCOs (Voltage Controlled Oscillators) [81]
Trimmers, Variable Capacitors [9]
Ferrite Cores [96]
Feed Through Capacitors [134]
Slide Potentiometers [123]
Motor Start, Motor Run Capacitors (AC) [29]
SAW Filters [201]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Technical electronic component GLE GCRH73-330MC providing detailed inductance and resistance data for engineering

Current - Saturation (Isat) : 910mA

Description : 910mA SMD,7.3x7.3mm Fixed Inductors RoHS

Mfr. Part # : GCRH73-330MC

Model Number : GCRH73-330MC

Package : SMD,7.3x7.3mm

Contact Now

Product Overview

The GCRH73 GLE series is a range of electronic components from Shenzhen Glorious Electronic Co.,Ltd., designed for various applications. These components are manufactured using high-quality materials and adhere to strict quality and environmental standards.

Product Attributes

Brand: GCRH73 GLE
Origin: China (Magnetic powder, Glue, Electrode), Germany (Wire)
Color: Black printing
Certifications: RoHS Comp.

Technical Specifications

Part NO.	Inductance Lo (uH)	Test Frequency (Hz/v)	DC Resistance (m) max.	Isat (A) Max. L/L-35%	Inductance Tolerance
GCRH73-2R2NC	2.2	1KHz/0.25v	27	4.50	J=5% K=10% L=15% M=20% N=30%
GCRH73-3R3NC	3.3	1KHz/0.25v	31	4.00	J=5% K=10% L=15% M=20% N=30%
GCRH73-4R7NC	4.7	1KHz/0.25v	48	3.50	J=5% K=10% L=15% M=20% N=30%
GCRH73-5R6NC	5.6	1KHz/0.25v	56	3.00	J=5% K=10% L=15% M=20% N=30%
GCRH73-6R8MC	6.8	1KHz/0.25v	62	2.00	J=5% K=10% L=15% M=20% N=30%
GCRH73-100MC	10	1KHz/0.25v	72	1.68	J=5% K=10% L=15% M=20% N=30%
GCRH73-120MC	12	1KHz/0.25v	98	1.52	J=5% K=10% L=15% M=20% N=30%
GCRH73-150MC	15	1KHz/0.25v	130	1.33	J=5% K=10% L=15% M=20% N=30%
GCRH73-180MC	18	1KHz/0.25v	140	1.20	J=5% K=10% L=15% M=20% N=30%
GCRH73-220MC	22	1KHz/0.25v	190	1.07	J=5% K=10% L=15% M=20% N=30%
GCRH73-270MC	27	1KHz/0.25v	210	0.96	J=5% K=10% L=15% M=20% N=30%
GCRH73-330MC	33	1KHz/0.25v	240	0.91	J=5% K=10% L=15% M=20% N=30%
GCRH73-390MC	39	1KHz/0.25v	320	0.77	J=5% K=10% L=15% M=20% N=30%
GCRH73-470MC	47	1KHz/0.25v	360	0.76	J=5% K=10% L=15% M=20% N=30%
GCRH73-560MC	56	1KHz/0.25v	470	0.68	J=5% K=10% L=15% M=20% N=30%
GCRH73-680MC	68	1KHz/0.25v	520	0.61	J=5% K=10% L=15% M=20% N=30%
GCRH73-820MC	82	1KHz/0.25v	690	0.57	J=5% K=10% L=15% M=20% N=30%
GCRH73-101MC	100	1KHz/0.25v	790	0.50	J=5% K=10% L=15% M=20% N=30%
GCRH73-121MC	120	1KHz/0.25v	890	0.49	J=5% K=10% L=15% M=20% N=30%
GCRH73-151MC	150	1KHz/0.25v	1270	0.43	J=5% K=10% L=15% M=20% N=30%
GCRH73-181MC	180	1KHz/0.25v	1450	0.39	J=5% K=10% L=15% M=20% N=30%
GCRH73-221MC	220	1KHz/0.25v	1650	0.35	J=5% K=10% L=15% M=20% N=30%
GCRH73-271MC	270	1KHz/0.25v	2310	0.32	J=5% K=10% L=15% M=20% N=30%
GCRH73-331MC	330	1KHz/0.25v	2620	0.28	J=5% K=10% L=15% M=20% N=30%
GCRH73-391MC	390	1KHz/0.25v	2940	0.26	J=5% K=10% L=15% M=20% N=30%
GCRH73-471MC	470	1KHz/0.25v	4180	0.24	J=5% K=10% L=15% M=20% N=30%
GCRH73-561MC	560	1KHz/0.25v	4670	0.22	J=5% K=10% L=15% M=20% N=30%
GCRH73-681MC	680	1KHz/0.25v	5730	0.19	J=5% K=10% L=15% M=20% N=30%
GCRH73-821MC	820	1KHz/0.25v	6540	0.18	J=5% K=10% L=15% M=20% N=30%
GCRH73-102MC	1000	1KHz/0.25v	9440	0.16	J=5% K=10% L=15% M=20% N=30%

General Specifications:

Item	Specification	Condition
Bending test	Change from an initial value L : within10%	Apply pressure gradually in the direction of the arrow at a rate of about 0.5mm/s until bent depth reaches 3mm and hold for 305s.
Adhesion strength	Change from an initial value L : within10%	A static load using a R0.5 pressing tool shall be applied the arrow and to the body of the specimen in the direction of the arrow and shall be hold for 605s.Measure after removing pressure.
Vibration	Change from an initial value L : within10%	The specimen shall be subjected to a vibration of 1.5mm amplitude, sweep frequency 10~55Hz (10Hz to 55Hz to 10Hz in a period of one minute) for 1 h in each of 3(X,Y,Z) axes.
Mechanical shock	Change from an initial value L : within10%	Peak acceleration: 981 m/S2 Duration of pulse: 6ms 3 times in each of 3(X,Y,Z)axes. The specimen must be fixed on test board. Three successive shock shall be applied in the perpendicular direction of each surface of the specimen.
Free fall test	Change from an initial value L : within10%	The specimen must be fixed on test board. It must be equipped with instruments of which weight is 500g. Then it shall be fallen freely from 1m height to rigid wood 3 times in each of three axes.
Solder ability	New solder shall cover 90% minimum of the surface immersed.	Terminals shall be immersed for 5 to 10 seconds in flux at room temperature. Dip sample into solder bath containing molten solder at 2455for 30.5 seconds.
Resistance to soldering heat	Change from an initial value L : within10%	Reflow soldering method: Preheat 150~180 9030s, Peak temp 260 (230min , 3010s). The specimen shall be subjected to the reflow process under the above condition 2 times.Test board shall be 0.8mm thick. Base material shall be glass epoxy resin. Measurement shall be made after storing at standard atmospheric conditions for 1 h.
Dielectric strength	Without damage.	100V DC shall be applied for 60s between the terminal and the core.
Insulation resistance	100Mor more.	100V DC shall be applied between the terminal and the core.
Low temperature	Change from an initial value L : within10%	After stored at a temperature of -40 3for 500 12h. Measured under normal temperature and humidity within 1h~ 2h.
Dry heat	Change from an initial value L : within10%	Stored at a temperature of 852for 500 12h. Stabilized under standard atmospheric conditions for 1 h before measurement. Measurement shall be made within 1h~ 2h.
Damp heat	Change from an initial value L : within10%	Stored at a temperature of 602with relative humidity of 90 ~ 95% for 500 12h. Stabilized under standard atmospheric conditions for 1 h before measurement. Measurement shall be made within 1h~ 2h.
Temperature cycle	Change from an initial value L : within10%	500 continuous cycles of -40for 30 min and 85for 30 min (transit time 2min). Stabilized under standard atmospheric conditions for 1 h before measurement. Measurement shall be made within 1h~ 2h.
Temperature drift	Inductance temperature coefficient 2000 ppm/or less	Measured in the range of -25to 85.
Operating temperature range	-40 ~ + 125	Includes product heating temperature.
Storage temperature range	-40 ~ + 85	In packing state. (* -40 ~ + 60)
Standard atmospheric conditions	Ambient temperature: 5to 35, Relative humidity: 45% to 85%, Air pressure: 86kPa to 106kPa. For stricter measurement: Ambient temperature: 202, Relative humidity: 655%, Air pressure: 86kPa to 106kPa.	Unless otherwise specified.

2410121507_GLE-GCRH73-330MC_C439492.pdf

Quality Technical electronic component GLE GCRH73-330MC providing detailed inductance and resistance data for engineering for sale

Technical electronic component GLE GCRH73-330MC providing detailed inductance and resistance data for engineering Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!